DSM TH_KILL channel 14

This commit is contained in:
pascallanger 2019-10-07 23:30:17 +02:00
parent 2406080515
commit b0749a1bee

View File

@ -549,7 +549,7 @@ Notes:
- RX output will match the Spektrum standard TAER independently of the input configuration AETR, RETA...
- RX output will match the Spektrum standard throw (1500µs +/- 400µs -> 1100..1900µs) for a 100% input. This is true for both Serial and PPM input. For PPM, make sure the end points PPM_MIN_100 and PPM_MAX_100 in _config.h are matching your TX ouput. The maximum ouput is 1000..2000µs based on an input of 125%.
- If you want to override the above and get maximum throw (old way) uncomment in _config.h the line #define DSM_MAX_THROW . In this mode to achieve standard throw use a channel weight of 84%.
- TH_KILL is a feature which is enabled on channel 14 by default (can be disabled/changed) in the _config.h file. Some models (X-Vert, Blade 230S...) require a special position to instant stop the motor(s). If the channel 15 is above -50% the throttle is untouched but if it is between -50% and -100%, the throttle output will be forced between -100% and -150%. For example, a value of -80% applied on channel 14 will instantly kill the motors on the X-Vert.
- TH_KILL is a feature which is enabled on channel 14 by default (can be disabled/changed) in the _config.h file. Some models (X-Vert, Blade 230S...) require a special position to instant stop the motor(s). If the channel 14 is above -50% the throttle is untouched but if it is between -50% and -100%, the throttle output will be forced between -100% and -150%. For example, a value of -80% applied on channel 14 will instantly kill the motors on the X-Vert.
### Sub_protocol DSM2_22 - *0*
DSM2, Resolution 1024, refresh rate 22ms