mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 22:28:12 +00:00
Delete FrSkyX_cc2500.ino
This commit is contained in:
pascallanger
GitHub
parent
dd3f8b4717
commit
af88abb13f
@ -1,286 +0,0 @@
|
||||
|
||||
/* **************************
|
||||
* By Midelic on RCGroups *
|
||||
**************************
|
||||
This project is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Multiprotocol is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#if defined(FRSKYX_CC2500_INO)
|
||||
|
||||
#include "iface_cc2500.h"
|
||||
|
||||
uint8_t chanskip;
|
||||
uint8_t seq_last_sent;
|
||||
uint8_t seq_last_rcvd;
|
||||
|
||||
static void __attribute__((unused)) set_start(uint8_t ch )
|
||||
{
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
CC2500_WriteReg(CC2500_25_FSCAL1, calData[ch]);
|
||||
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[ch]);
|
||||
}
|
||||
|
||||
static void __attribute__((unused)) frskyX_init()
|
||||
{
|
||||
FRSKY_init_cc2500((sub_protocol&2)?FRSKYXEU_cc2500_conf:FRSKYX_cc2500_conf); // LBT or FCC
|
||||
//
|
||||
for(uint8_t c=0;c < 48;c++)
|
||||
{//calibrate hop channels
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
CC2500_WriteReg(CC2500_0A_CHANNR,hopping_frequency[c]);
|
||||
CC2500_Strobe(CC2500_SCAL);
|
||||
delayMicroseconds(900);//
|
||||
calData[c] = CC2500_ReadReg(CC2500_25_FSCAL1);
|
||||
}
|
||||
//#######END INIT########
|
||||
}
|
||||
|
||||
static void __attribute__((unused)) initialize_data(uint8_t adr)
|
||||
{
|
||||
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); // Frequency offset hack
|
||||
CC2500_WriteReg(CC2500_18_MCSM0, 0x8);
|
||||
CC2500_WriteReg(CC2500_09_ADDR, adr ? 0x03 : rx_tx_addr[3]);
|
||||
CC2500_WriteReg(CC2500_07_PKTCTRL1,0x05);
|
||||
}
|
||||
|
||||
//**CRC**
|
||||
const uint16_t PROGMEM CRC_Short[]={
|
||||
0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
|
||||
0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7 };
|
||||
static uint16_t CRCTable(uint8_t val)
|
||||
{
|
||||
uint16_t word ;
|
||||
word = pgm_read_word(&CRC_Short[val&0x0F]) ;
|
||||
val /= 16 ;
|
||||
return word ^ (0x1081 * val) ;
|
||||
}
|
||||
static uint16_t __attribute__((unused)) crc_x(uint8_t *data, uint8_t len)
|
||||
{
|
||||
uint16_t crc = 0;
|
||||
for(uint8_t i=0; i < len; i++)
|
||||
crc = (crc<<8) ^ CRCTable((uint8_t)(crc>>8) ^ *data++);
|
||||
return crc;
|
||||
}
|
||||
|
||||
// 0-2047, 0 = 817, 1024 = 1500, 2047 = 2182
|
||||
//64=860,1024=1500,1984=2140//Taranis 125%
|
||||
|
||||
static uint16_t __attribute__((unused)) scaleForPXX( uint8_t i )
|
||||
{ //mapped 860,2140(125%) range to 64,1984(PXX values);
|
||||
return (uint16_t)(((Servo_data[i]-servo_min_125)*3)>>1)+64;
|
||||
}
|
||||
|
||||
static void __attribute__((unused)) frskyX_build_bind_packet()
|
||||
{
|
||||
packet[0] = (sub_protocol & 2 ) ? 0x20 : 0x1D ; // LBT or FCC
|
||||
packet[1] = 0x03;
|
||||
packet[2] = 0x01;
|
||||
//
|
||||
packet[3] = rx_tx_addr[3];
|
||||
packet[4] = rx_tx_addr[2];
|
||||
int idx = ((state -FRSKY_BIND) % 10) * 5;
|
||||
packet[5] = idx;
|
||||
packet[6] = hopping_frequency[idx++];
|
||||
packet[7] = hopping_frequency[idx++];
|
||||
packet[8] = hopping_frequency[idx++];
|
||||
packet[9] = hopping_frequency[idx++];
|
||||
packet[10] = hopping_frequency[idx++];
|
||||
packet[11] = 0x02;
|
||||
packet[12] = RX_num;
|
||||
//
|
||||
uint8_t limit = (sub_protocol & 2 ) ? 31 : 28 ;
|
||||
memset(&packet[13], 0, limit - 13);
|
||||
uint16_t lcrc = crc_x(&packet[3], limit-3);
|
||||
//
|
||||
packet[limit++] = lcrc >> 8;
|
||||
packet[limit] = lcrc;
|
||||
//
|
||||
}
|
||||
|
||||
static void __attribute__((unused)) frskyX_data_frame()
|
||||
{
|
||||
//0x1D 0xB3 0xFD 0x02 0x56 0x07 0x15 0x00 0x00 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x00 0x04 0x40 0x08 0x00 0x00 0x00 0x00 0x00 0x00 0x96 0x12
|
||||
//
|
||||
static uint8_t lpass;
|
||||
uint16_t chan_0 ;
|
||||
uint16_t chan_1 ;
|
||||
uint8_t startChan = 0;
|
||||
//
|
||||
packet[0] = (sub_protocol & 2 ) ? 0x20 : 0x1D ; // LBT or FCC
|
||||
packet[1] = rx_tx_addr[3];
|
||||
packet[2] = rx_tx_addr[2];
|
||||
packet[3] = 0x02;
|
||||
//
|
||||
packet[4] = (chanskip<<6)|hopping_frequency_no;
|
||||
packet[5] = chanskip>>2;
|
||||
packet[6] = RX_num;
|
||||
//packet[7] = FLAGS 00 - standard packet
|
||||
//10, 12, 14, 16, 18, 1A, 1C, 1E - failsafe packet
|
||||
//20 - range check packet
|
||||
packet[7] = 0;
|
||||
packet[8] = 0;
|
||||
//
|
||||
if ( lpass & 1 )
|
||||
startChan += 8 ;
|
||||
|
||||
for(uint8_t i = 0; i <12 ; i+=3)
|
||||
{//12 bytes
|
||||
chan_0 = scaleForPXX(startChan);
|
||||
if(lpass & 1 )
|
||||
chan_0+=2048;
|
||||
startChan+=1;
|
||||
//
|
||||
chan_1 = scaleForPXX(startChan);
|
||||
if(lpass & 1 )
|
||||
chan_1+= 2048;
|
||||
startChan+=1;
|
||||
//
|
||||
packet[9+i] = lowByte(chan_0);//3 bytes*4
|
||||
packet[9+i+1]=(((chan_0>>8) & 0x0F)|(chan_1 << 4));
|
||||
packet[9+i+2]=chan_1>>4;
|
||||
}
|
||||
|
||||
packet[21] = seq_last_sent << 4 | seq_last_rcvd;//8 at start
|
||||
if (seq_last_sent < 0x08 && seq_last_rcvd < 8)
|
||||
seq_last_sent = (seq_last_sent + 1) % 4;
|
||||
else if (seq_last_rcvd == 0x00)
|
||||
seq_last_sent = 1;
|
||||
else
|
||||
seq_last_rcvd = 8;
|
||||
|
||||
if(sub_protocol & 1 )// in X8 mode send only 8ch every 9ms
|
||||
lpass = 0 ;
|
||||
else
|
||||
lpass += 1 ;
|
||||
|
||||
uint8_t limit = (sub_protocol & 2 ) ? 31 : 28 ;
|
||||
for (uint8_t i=22;i<limit;i++)
|
||||
packet[i]=0;
|
||||
uint16_t lcrc = crc_x(&packet[3], limit-3);
|
||||
|
||||
packet[limit++]=lcrc>>8;//high byte
|
||||
packet[limit]=lcrc;//low byte
|
||||
}
|
||||
|
||||
uint16_t ReadFrSkyX()
|
||||
{
|
||||
switch(state)
|
||||
{
|
||||
default:
|
||||
set_start(47);
|
||||
CC2500_SetPower();
|
||||
CC2500_Strobe(CC2500_SFRX);
|
||||
//
|
||||
frskyX_build_bind_packet();
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
CC2500_WriteData(packet, packet[0]+1);
|
||||
if(IS_BIND_DONE_on)
|
||||
state = FRSKY_BIND_DONE;
|
||||
else
|
||||
state++;
|
||||
return 9000;
|
||||
case FRSKY_BIND_DONE:
|
||||
initialize_data(0);
|
||||
hopping_frequency_no=0;
|
||||
BIND_DONE;
|
||||
state++;
|
||||
break;
|
||||
case FRSKY_DATA1:
|
||||
if ( prev_option != option )
|
||||
{
|
||||
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); // Frequency offset hack
|
||||
prev_option = option ;
|
||||
}
|
||||
CC2500_SetTxRxMode(TX_EN);
|
||||
set_start(hopping_frequency_no);
|
||||
CC2500_SetPower();
|
||||
CC2500_Strobe(CC2500_SFRX);
|
||||
hopping_frequency_no = (hopping_frequency_no+chanskip)%47;
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
CC2500_WriteData(packet, packet[0]+1);
|
||||
//
|
||||
frskyX_data_frame();
|
||||
state++;
|
||||
return 5500;
|
||||
case FRSKY_DATA2:
|
||||
CC2500_SetTxRxMode(RX_EN);
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
state++;
|
||||
return 200;
|
||||
case FRSKY_DATA3:
|
||||
CC2500_Strobe(CC2500_SRX);
|
||||
state++;
|
||||
return 3000;
|
||||
case FRSKY_DATA4:
|
||||
len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;
|
||||
if (len && (len<=(0x0E + 3))) //Telemetry frame is 17
|
||||
{
|
||||
packet_count=0;
|
||||
CC2500_ReadData(pkt, len);
|
||||
#if defined TELEMETRY
|
||||
frsky_check_telemetry(pkt,len); //check if valid telemetry packets
|
||||
//parse telemetry packets here
|
||||
//The same telemetry function used by FrSky(D8).
|
||||
#endif
|
||||
}
|
||||
else
|
||||
{
|
||||
packet_count++;
|
||||
// restart sequence on missed packet - might need count or timeout instead of one missed
|
||||
if(packet_count>100)
|
||||
{//~1sec
|
||||
seq_last_sent = 0;
|
||||
seq_last_rcvd = 8;
|
||||
packet_count=0;
|
||||
#if defined TELEMETRY
|
||||
telemetry_lost=1;
|
||||
#endif
|
||||
}
|
||||
CC2500_Strobe(CC2500_SFRX); //flush the RXFIFO
|
||||
}
|
||||
state = FRSKY_DATA1;
|
||||
return 300;
|
||||
}
|
||||
return 1;
|
||||
}
|
||||
|
||||
uint16_t initFrSkyX()
|
||||
{
|
||||
set_rx_tx_addr(MProtocol_id_master);
|
||||
Frsky_init_hop();
|
||||
packet_count=0;
|
||||
while(!chanskip)
|
||||
chanskip=random(0xfefefefe)%47;
|
||||
|
||||
//for test***************
|
||||
//rx_tx_addr[3]=0xB3;
|
||||
//rx_tx_addr[2]=0xFD;
|
||||
//************************
|
||||
frskyX_init();
|
||||
//
|
||||
if(IS_AUTOBIND_FLAG_on)
|
||||
{
|
||||
state = FRSKY_BIND;
|
||||
initialize_data(1);
|
||||
}
|
||||
else
|
||||
{
|
||||
state = FRSKY_DATA1;
|
||||
initialize_data(0);
|
||||
}
|
||||
seq_last_sent = 0;
|
||||
seq_last_rcvd = 8;
|
||||
return 10000;
|
||||
}
|
||||
#endif
|
||||
Loading…
x
Reference in New Issue
Block a user