gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-03 12:07:52 +00:00
Code Issues Projects Releases Wiki Activity

Flashing info

Browse Source
This commit is contained in:
midelic 2016-08-01 16:14:26 +03:00 committed by GitHub
parent df9ff18a0a
commit acc6df0800
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -304,12 +304,12 @@ or other USB serial-TTL dongle.
###Important: ###Important:
Don't flash new firmware with the TX switched on !!!!!
If using 3.3V USB-TTL device it is required to use a jumper on "3.3V jumper" on top of the board.After flashing it is imperative to be removed. If using 3.3V USB-TTL device it is required to use a jumper on "3.3V jumper" on top of the board.After flashing it is imperative to be removed.
Before uploading new firmware use a jumper on BOOT0.After flashing new firmware remove also the BOOT0 jumper,or move it to oposite pin. Before uploading new firmware use a jumper on BOOT0.After flashing new firmware remove also the BOOT0 jumper,or move it to oposite pin.
Don't flash new firmware with the TX switched on.
###Warning!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ###Warning!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
After flashing new firmware it is mandatory to remove the 3.3V jumper if installed.If not when starting the module and micro you may fry them as 5V is supplied directly on the RF module and micro. After flashing new firmware it is mandatory to remove the 3.3V jumper if installed.If not when starting the module and micro you may fry them as 5V is supplied directly on the RF module and micro.