diff --git a/docs/Compiling_STM32.md b/docs/Compiling_STM32.md
index 3ec1464..3c39081 100644
--- a/docs/Compiling_STM32.md
+++ b/docs/Compiling_STM32.md
@@ -127,7 +127,7 @@ In order to flash the bootloader the **BOOT0** jumper must be installed connecti
 
 | **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** | **iRangeX IRX4 Plus Module** | **Vantac MPM Lite** |
 |:---:|:---:|:---:|:---:|:---:|
-| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. If not working add a second bridge above the one shown.| Brdige the two pins next to the usb port labelled with Boot0 |
+| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. If it doesn't work add a second bridge above the yellow one. | Brdige the two pins next to the usb port labelled with Boot0 |
 | <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/>  | <img src="images/irx4-boot0.jpg" height="200"/>  | <img src="images/irx4plus-boot0.jpg" height="200"/> | <img src="images/mpmlite-boot0.jpg" width="200" /> |
 
 1. If on Linux, ensure you have permissions to access serial interfaces as described in [Install the Maple USB drivers](#install-the-maple-usb-drivers)