gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:48:11 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
pascallanger 2018-09-11 06:06:34 -04:00 committed by GitHub
parent b1fb3a5470
commit ab9525c507
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/Compiling_STM32.md
View File

@ -60,6 +60,7 @@ The 4-pin header needs to be soldered onto the board as indicated by the red rec
### Configure the Arduino IDE
1. Under **Tools -> Board** select **Multi 4-in-1 (STM32FC103)**
1. Under **Tools -> Upload method** select **Auto Detect (USB or Serial)** <- more details on this subject later on
1. Under **Tools -> Programmer** select **stm32flash (FTDI)**
## Configure the firmware
@ -67,7 +68,7 @@ The STM32 module has more than enough flash space for all the available protocol
You can still disable protocols if you wish, and you may also enable or disable other optional Multiprotocol features.
## Verify the firmware
To check that the program will compile correctly and fit in the Atmega click **Sketch -> Verify/Compile**, or press **Ctrl+R**.
To check that the program will compile correctly and fit in the STM32 click **Sketch -> Verify/Compile**, or press **Ctrl+R**.
If there are errors, carefully read it, go to the line number indicated and correct your typo.