gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-18 23:03:15 +00:00
Code Issues Projects Releases Wiki Activity

Introduction of Banks for the switch protocol selection

Browse Source
This commit is contained in:
Pascal Langer
2018-01-30 12:02:45 +01:00
parent f4a4f67453
commit ab27ee50b0
12 changed files with 449 additions and 280 deletions
Download Patch File Download Diff File Expand all files Collapse all files

20
Multiprotocol/A7105_SPI.ino
View File

@@ -27,7 +27,7 @@ void A7105_WriteData(uint8_t len, uint8_t channel)
for (i = 0; i < len; i++)
SPI_Write(packet[i]);
A7105_CSN_on;
if(protocol!=MODE_FLYSKY)
if(protocol!=PROTO_FLYSKY)
{
A7105_Strobe(A7105_STANDBY); //Force standby mode, ie cancel any TX or RX...
A7105_SetTxRxMode(TX_EN); //Switch to PA
@@ -177,17 +177,17 @@ void A7105_AdjustLOBaseFreq(uint8_t cmd)
old_offset=2048;
switch(protocol)
{
case MODE_HUBSAN:
case PROTO_HUBSAN:
#ifdef FORCE_HUBSAN_TUNING
offset=(int16_t)FORCE_HUBSAN_TUNING;
#endif
break;
case MODE_FLYSKY:
case PROTO_FLYSKY:
#ifdef FORCE_FLYSKY_TUNING
offset=(int16_t)FORCE_FLYSKY_TUNING;
#endif
break;
case MODE_AFHDS2A:
case PROTO_AFHDS2A:
#ifdef FORCE_AFHDS2A_TUNING
offset=(int16_t)FORCE_AFHDS2A_TUNING;
#endif
@@ -255,7 +255,7 @@ void A7105_Init(void)
uint8_t *A7105_Regs=0;
#ifdef HUBSAN_A7105_INO
if(protocol==MODE_HUBSAN)
if(protocol==PROTO_HUBSAN)
{
A7105_WriteID(ID_NORMAL);
A7105_Regs=(uint8_t*)HUBSAN_A7105_regs;
@@ -265,7 +265,7 @@ void A7105_Init(void)
{
A7105_WriteID(0x5475c52A);//0x2Ac57554
#ifdef FLYSKY_A7105_INO
if(protocol==MODE_FLYSKY)
if(protocol==PROTO_FLYSKY)
A7105_Regs=(uint8_t*)FLYSKY_A7105_regs;
else
#endif
@@ -280,7 +280,7 @@ void A7105_Init(void)
{
uint8_t val=pgm_read_byte_near(&A7105_Regs[i]);
#ifdef FLYSKY_A7105_INO
if(protocol==MODE_FLYSKY && sub_protocol==CX20)
if(protocol==PROTO_FLYSKY && sub_protocol==CX20)
{
if(i==0x0E) val=0x01;
if(i==0x1F) val=0x1F;
@@ -298,7 +298,7 @@ void A7105_Init(void)
// A7105_ReadReg(A7105_22_IF_CALIB_I);
// A7105_ReadReg(A7105_24_VCO_CURCAL);
if(protocol!=MODE_HUBSAN)
if(protocol!=PROTO_HUBSAN)
{
//VCO Current Calibration
A7105_WriteReg(A7105_24_VCO_CURCAL,0x13); //Recommended calibration from A7105 Datasheet
@@ -319,8 +319,8 @@ void A7105_Init(void)
// A7105_ReadReg(A7105_25_VCO_SBCAL_I);
//Reset VCO Band calibration
if(protocol!=MODE_HUBSAN)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,protocol==MODE_FLYSKY?0x08:0x0A);
if(protocol!=PROTO_HUBSAN)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,protocol==PROTO_FLYSKY?0x08:0x0A);
A7105_SetTxRxMode(TX_EN);
A7105_SetPower();