From a77aee0e1a9b6ede7f3200a0aa6069c4de98b2c5 Mon Sep 17 00:00:00 2001
From: Pascal Langer <planger@mathworks.com>
Date: Sat, 9 May 2020 16:11:36 +0200
Subject: [PATCH] Update Protocols_Details.md

---
 Protocols_Details.md | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Protocols_Details.md b/Protocols_Details.md
index d930ea7..65a3a50 100644
--- a/Protocols_Details.md
+++ b/Protocols_Details.md
@@ -537,7 +537,9 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
 ---|---|---|---|---|---|---|---|---|---|---|---
 A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
 
-Note that the RX ouput will be EATR.
+RX output will match the Devo standard EATR independently of the input configuration AETR, RETA... unless on OpenTX 2.3.3+ you use the "Disable channel mapping" feature on the GUI.
+
+Basic telemetry is available if RX supports it: TX_RSSI, A1 and A2
 
 Bind procedure using serial:
 - With the TX off, put the binding plug in and power on the RX (RX LED slow blink), then power it down and remove the binding plug. Receiver should now be in autobind mode.