mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 18:38:13 +00:00
Travis release build changes (#450)
* Move the release build steps into separate shell scripts * Remove builds that we don't need any more * Latest builds of er9x and erSkyTx both support MULTI_TELEMETRY so separate OpenTX / erSkyTx builds are no longer needed * Radio can switch telemetry inversion on or off automatically so STM32 inv / noinv builds are no longer needed
This commit is contained in:
Ben Lye
GitHub
parent
baf9a0f978
commit
a633f46f4f
266
.travis.yml
266
.travis.yml
@ -32,255 +32,38 @@ before_install:
|
||||
- buildDefault() { exitcode=0; printf "\n\e[33;1mBuilding default configuration\e[0m\n"; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
|
||||
- buildSerialOnly() { exitcode=0; printf "\n\e[33;1mBuilding serial mode only\e[0m\n"; opt_disable ENABLE_PPM; opt_enable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
|
||||
- buildPPMOnly() { exitcode=0; printf "\n\e[33;1mBuilding PPM mode only\e[0m\n"; opt_enable ENABLE_PPM; opt_disable ENABLE_SERIAL; buildMulti; if [ $? -ne 0 ]; then exitcode=1; fi; return $exitcode; }
|
||||
- export -f buildMulti
|
||||
|
||||
# Function to build the release files - dependent on board type
|
||||
# Function to build the release files - dependent on board type.
|
||||
# Release build scripts are located in buildroot/bin.
|
||||
- if [[ "$BOARD" == "multi4in1:avr:multixmega32d4" ]]; then
|
||||
buildReleaseFiles(){
|
||||
exitcode=0;
|
||||
printf "\n\e[33;1mBuilding multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable $ALL_PROTOCOLS;
|
||||
opt_disable ORANGE_TX_BLUE;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable ORANGE_TX_BLUE;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
|
||||
cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
|
||||
mkdir -p SCRIPTS/TOOLS;
|
||||
cp Lua_scripts/*.lua SCRIPTS/TOOLS/;
|
||||
cp Lua_scripts/*.txt SCRIPTS/TOOLS/;
|
||||
zip ./binaries/MultiLuaScripts.zip SCRIPTS/TOOLS/*;
|
||||
return $exitcode; };
|
||||
build_release_orx;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
exitcode=0;
|
||||
opt_disable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $A7105_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CC2500_PROTOCOLS;
|
||||
opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
|
||||
buildMulti;
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CYRF6936_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_avr_noboot;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=optiboot" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
exitcode=0;
|
||||
opt_enable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $A7105_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CC2500_PROTOCOLS;
|
||||
opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CYRF6936_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_avr_optiboot;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=none" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
exitcode=0;
|
||||
opt_enable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable ENABLE_PPM;
|
||||
opt_enable $ALL_PROTOCOLS;
|
||||
opt_enable MULTI_STATUS;
|
||||
opt_disable MULTI_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace RETA AETR;
|
||||
opt_disable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-aetr-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-taer-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-reta-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace RETA AETR;
|
||||
opt_disable MULTI_STATUS;
|
||||
opt_enable MULTI_TELEMETRY;
|
||||
opt_enable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-inv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace RETA AETR;
|
||||
opt_disable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-aetr-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-taer-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-reta-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace RETA AETR;
|
||||
opt_disable A7105_INSTALLED;
|
||||
opt_disable CYRF6936_INSTALLED;
|
||||
opt_disable NRF24L01_INSTALLED;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-aetr-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-taer-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-opentx-reta-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable A7105_INSTALLED;
|
||||
opt_enable CYRF6936_INSTALLED;
|
||||
opt_enable NRF24L01_INSTALLED;
|
||||
opt_enable ENABLE_PPM;
|
||||
opt_disable ENABLE_SERIAL;
|
||||
opt_replace RETA AETR;
|
||||
opt_disable MULTI_STATUS;
|
||||
opt_disable MULTI_TELEMETRY;
|
||||
opt_set NBR_BANKS 5;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-noinv-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_stm32f1_no_debug;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=native" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
|
||||
exitcode=0;
|
||||
opt_enable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_add XN297DUMP_NRF24L01_INO;
|
||||
opt_enable MULTI_STATUS;
|
||||
opt_disable MULTI_TELEMETRY;
|
||||
opt_enable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_disable MULTI_STATUS;
|
||||
opt_enable MULTI_TELEMETRY;
|
||||
opt_enable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-usbdebug-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_stm32f1_native_debug;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:STM32F1:multistm32f103c:debug_option=ftdi" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
|
||||
exitcode=0;
|
||||
opt_enable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_add XN297DUMP_NRF24L01_INO;
|
||||
opt_enable MULTI_STATUS;
|
||||
opt_disable MULTI_TELEMETRY;
|
||||
opt_enable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-erskytx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_disable MULTI_STATUS;
|
||||
opt_enable MULTI_TELEMETRY;
|
||||
opt_enable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-opentx-xn297dump-inv-ftdidebug-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_stm32f1_serial_debug;
|
||||
};
|
||||
elif [[ "$BOARD" == "multi4in1:STM32F1:multi5in1t18int" ]]; then
|
||||
buildReleaseFiles(){
|
||||
printf "\n\e[33;1mBuilding multi-t18int-opentx-aetr-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable ENABLE_PPM;
|
||||
opt_disable INVERT_TELEMETRY;
|
||||
exitcode=0;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-aetr-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-t18int-opentx-taer-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
exitcode=0;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-taer-noinv-v$MULTI_VERSION.bin;
|
||||
printf "\n\e[33;1mBuilding multi-t18int-opentx-reta-noinv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
exitcode=0;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-opentx-reta-noinv-v$MULTI_VERSION.bin;
|
||||
return $exitcode; };
|
||||
build_release_stm32f1_t18int;
|
||||
};
|
||||
else
|
||||
buildReleaseFiles() { echo "No release files for this board."; };
|
||||
fi
|
||||
@ -306,6 +89,9 @@ install:
|
||||
fi
|
||||
|
||||
before_script:
|
||||
# Export all the variables
|
||||
- set -a
|
||||
|
||||
# Change current working directory to the build dir
|
||||
- cd ${TRAVIS_BUILD_DIR}
|
||||
|
||||
@ -343,11 +129,14 @@ before_script:
|
||||
- echo $ALL_PROTOCOLS
|
||||
|
||||
# Declare all the installed modules
|
||||
- if [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
|
||||
ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED SX1276_INSTALLED);
|
||||
else
|
||||
- if [[ "$BOARD" =~ "multi4in1:avr:multixmega32d4" ]]; then
|
||||
ALL_RFMODULES=$(echo CYRF6936_INSTALLED);
|
||||
elif [[ "$BOARD" =~ "multi4in1:avr:multiatmega328p:" ]]; then
|
||||
ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED);
|
||||
elif [[ "$BOARD" =~ "multi4in1:STM32F1:" ]]; then
|
||||
ALL_RFMODULES=$(echo A7105_INSTALLED CYRF6936_INSTALLED CC2500_INSTALLED NRF24L01_INSTALLED SX1276_INSTALLED);
|
||||
fi
|
||||
- echo $ALL_RFMODULES
|
||||
|
||||
# Disable CHECK_FOR_BOOTLOADER when not needed
|
||||
- if [[ "$BOARD" == "multi4in1:avr:multiatmega328p:bootloader=none" ]]; then
|
||||
@ -400,9 +189,6 @@ script:
|
||||
# Restore the default configuration
|
||||
- cp ./_Config.h.bak Multiprotocol/_Config.h
|
||||
|
||||
# Restore the default configuration
|
||||
- cp ./_Config.h.bak Multiprotocol/_Config.h
|
||||
|
||||
# Builds the files for a release - always built, but only copied to Github if the test is tagged as a release
|
||||
- buildReleaseFiles
|
||||
|
||||
|
||||
27
buildroot/bin/build_release_avr_noboot
Normal file
27
buildroot/bin/build_release_avr_noboot
Normal file
@ -0,0 +1,27 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $A7105_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CC2500_PROTOCOLS;
|
||||
opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
|
||||
buildMulti;
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CYRF6936_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
28
buildroot/bin/build_release_avr_optiboot
Normal file
28
buildroot/bin/build_release_avr_optiboot
Normal file
@ -0,0 +1,28 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable CHECK_FOR_BOOTLOADER;
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $A7105_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CC2500_PROTOCOLS;
|
||||
opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_enable $CYRF6936_PROTOCOLS;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
27
buildroot/bin/build_release_orx
Normal file
27
buildroot/bin/build_release_orx
Normal file
@ -0,0 +1,27 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable $ALL_PROTOCOLS;
|
||||
opt_disable ORANGE_TX_BLUE;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable ORANGE_TX_BLUE;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mPackaging ancilliary files for v$MULTI_VERSION\e[0m\n";
|
||||
cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
|
||||
mkdir -p SCRIPTS/TOOLS;
|
||||
cp Lua_scripts/*.lua SCRIPTS/TOOLS/;
|
||||
cp Lua_scripts/*.txt SCRIPTS/TOOLS/;
|
||||
zip -q ./binaries/MultiLuaScripts.zip SCRIPTS/TOOLS/*;
|
||||
|
||||
printf "\n";
|
||||
|
||||
exit $exitcode;
|
||||
12
buildroot/bin/build_release_stm32f1_native_debug
Normal file
12
buildroot/bin/build_release_stm32f1_native_debug
Normal file
@ -0,0 +1,12 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_add XN297DUMP_NRF24L01_INO;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
71
buildroot/bin/build_release_stm32f1_no_debug
Normal file
71
buildroot/bin/build_release_stm32f1_no_debug
Normal file
@ -0,0 +1,71 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-aetr-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable ENABLE_PPM;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-aetr-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-taer-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-taer-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-reta-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-reta-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-aetr-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace RETA AETR;
|
||||
opt_disable A7105_INSTALLED;
|
||||
opt_disable CYRF6936_INSTALLED;
|
||||
opt_disable NRF24L01_INSTALLED;
|
||||
opt_disable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-aetr-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-taer-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-taer-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-cc2500-reta-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-cc2500-reta-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_enable A7105_INSTALLED;
|
||||
opt_enable CYRF6936_INSTALLED;
|
||||
opt_enable NRF24L01_INSTALLED;
|
||||
opt_enable ENABLE_PPM;
|
||||
opt_disable ENABLE_SERIAL;
|
||||
opt_replace RETA AETR;
|
||||
opt_disable MULTI_STATUS;
|
||||
opt_disable MULTI_TELEMETRY;
|
||||
opt_set NBR_BANKS 5;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-taer-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-ppm-reta-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
12
buildroot/bin/build_release_stm32f1_serial_debug
Normal file
12
buildroot/bin/build_release_stm32f1_serial_debug
Normal file
@ -0,0 +1,12 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable $ALL_PROTOCOLS;
|
||||
opt_add XN297DUMP_NRF24L01_INO;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
24
buildroot/bin/build_release_stm32f1_t18int
Normal file
24
buildroot/bin/build_release_stm32f1_t18int
Normal file
@ -0,0 +1,24 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
exitcode=0;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-t18int-aetr-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_disable ENABLE_PPM;
|
||||
opt_disable INVERT_TELEMETRY;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-aetr-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-t18int-taer-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace AETR TAER;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-taer-v$MULTI_VERSION.bin;
|
||||
|
||||
printf "\n\e[33;1mBuilding multi-t18int-reta-v$MULTI_VERSION.bin\e[0m";
|
||||
opt_replace TAER RETA;
|
||||
buildMulti;
|
||||
exitcode=$((exitcode+$?));
|
||||
mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-reta-v$MULTI_VERSION.bin;
|
||||
|
||||
exit $exitcode;
|
||||
Loading…
x
Reference in New Issue
Block a user