gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-13 02:07:53 +00:00
Code Issues Projects Releases Wiki Activity

Why do I always swap below & above ?

Browse Source
This commit is contained in:
Goebish 2019-05-16 12:55:50 +02:00
parent 28b3438308
commit a5c2454244
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Protocols_Details.md
View File

@ -866,7 +866,7 @@ Only 3 TX IDs available, change RX_Num value 0..2 to cycle through them
If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware. If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware.
If a CC2500 module is available it will be used in place of the NRF24L01, fixing the issue mentioned below. When using a CC2500 module, Option for this protocol corresponds to fine frequency tuning. If a CC2500 module is available it will be used in place of the NRF24L01, fixing the issue mentioned above. When using a CC2500 module, Option for this protocol corresponds to fine frequency tuning.
Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary.
### Sub_protocol H26WH - *5* ### Sub_protocol H26WH - *5*