gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-10 01:28:13 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
Ben Lye 2017-12-09 10:20:29 +00:00 committed by GitHub
parent a8050fd8a1
commit a53046bf12
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Compiling_STM32.md
View File

@ -117,7 +117,9 @@ The wiring for the USB-to-TTL adapter is:
### Burn the bootloader ### Burn the bootloader
If you are using **Upload via Serial** you can skip this step and proceed to [Upload via Serial](#upload-via-serial). If you are using **Upload via Serial** you can skip this step and proceed to [Upload via Serial](#upload-via-serial).
If you have selected either **Flash from TX** or **Upload via USB** the module will need to install the appropriate bootloader. The bootloader only needs to be installed once unless you decide to switch from one upload method to the other. If you have selected either **Flash from TX** or **Upload via USB** the module will need to install the appropriate bootloader, which is selected automatically based on the Upload Method selection.
The bootloader only needs to be installed once unless you decide to switch from one upload method to the other.
In order to flash the bootloader the **BOOT0** jumper must be installed. The location of **BOOT0** varies by hardware module. In order to flash the bootloader the **BOOT0** jumper must be installed. The location of **BOOT0** varies by hardware module.
@ -128,7 +130,7 @@ In order to flash the bootloader the **BOOT0** jumper must be installed. The lo
1. Install the **BOOT0** jumper as described above 1. Install the **BOOT0** jumper as described above
1. Switch on the transmitter 1. Switch on the transmitter
1. Verify that you have selected the correct upload method under **Tools -> Upload Method** 1. Verify that you have selected the desired upload method under **Tools -> Upload Method**
1. Verify that you have selected **stm32flash (FTDI)** as the programmer under **Tools -> Programmer** 1. Verify that you have selected **stm32flash (FTDI)** as the programmer under **Tools -> Programmer**
1. Verify that the USB-to-TTL adapter is correctly connected to your module and you have selected the correct port under **Tools -> Port** 1. Verify that the USB-to-TTL adapter is correctly connected to your module and you have selected the correct port under **Tools -> Port**
1. Click on **Tools -> Burn Bootloader** 1. Click on **Tools -> Burn Bootloader**