gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 19:38:13 +00:00
Code Issues Projects Releases Wiki Activity

Update Module_BG_4-in-1.md

Browse Source
This commit is contained in:
pascallanger 2016-12-05 17:48:56 +01:00 committed by GitHub
parent 8139c33b86
commit a35a209066
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Module_BG_4-in-1.md
View File

@ -28,15 +28,19 @@ If you are only planning on using the PPM interface with transmitter you are rea
###Enabling Serial and Telemetry interface
If you have a transmitter that can support serial communication with the board then you need to wire up the board appropriately. There are two versions of the module and the steps are slightly different.
Check which module you have and based on the pictures below. If you purchased the module after June 2016 then it is likely that you have V2 type module.
Check which module you have and based on the pictures below. If you purchased the module after June 2016 then it is likely that you have a V2 type module.
#### **Version 2 (V2) type modules**
Solder two bridges over the pads shown in the pictures below.
V2a
<img src="images/V2a_Serial_Enable.jpeg" width="300" height="340" />
<img src="images/V2a_zoom_Serial_Enable.jpeg" width="450" height="340" />
V2b
<img src="images/V2b_Serial_Enable.jpeg" width="220" height="340" />
You are now ready to go over to [Compiling and Programming](Compiling.md).