gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-12 17:57:53 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
Ben Lye 2019-09-06 19:22:57 +01:00 committed by GitHub
parent 797e569240
commit a259bc9154
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 10 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
docs/Compiling_STM32.md
View File

@ -15,13 +15,11 @@ Multiprotocol modules can be flashed with a precompiled firmware file (Option 1)
1. [Configure the Arduino IDE](#configure-the-arduino-ide) 1. [Configure the Arduino IDE](#configure-the-arduino-ide)
1. [Configure the firmware](#configure-the-firmware) 1. [Configure the firmware](#configure-the-firmware)
1. [Verify the firmware](#verify-the-firmware) 1. [Verify the firmware](#verify-the-firmware)
1. [Preparing to upload the firmware](#preparing-to-upload-the-firmware) 1. [Connect the module](#connect-the-module)
1. [Select an upload method](#select-an-upload-method) 1. [USB Port](#usb-port)
1. [Upload via Serial inc. Bootloader (FTDI)](#upload-via-serial-inc-bootloader-ftdi) 1. [USB-to-Serial adapter](#usb-to-serial-adapter)
1. [Flash from TX](#flash-from-tx) 1. [Upload the firmware](#upload-the-firmware)
1. [Upload via USB](#upload-via-usb) 1. [Exporting compiled firmware](exporting-compiled-firmware)
1. [Install the Maple USB Drivers](#install-the-maple-usb-drivers)
1. [Upload the firmware](#upload-the-firmware)
1. [Troubleshooting](#troubleshooting) 1. [Troubleshooting](#troubleshooting)
## Tools required ## Tools required
@ -57,7 +55,7 @@ The 4-pin header needs to be soldered onto the board as indicated by the red rec
## Option 1 - Update Firmware using Precompiled Binaries ## Option 1 - Update Firmware using Precompiled Binaries
If you don't need/want to customize the multi module firmware then you can use pre-compiled binaries available [here](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases). If you don't need/want to customize the multi module firmware then you can use pre-compiled binaries available [here](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases).
**STM32 Builds (file names beginning with 'Multi-STM_') **STM32 Builds (file names beginning with 'Multi-STM_')**
- All radio modules and protocols are included in all builds - All radio modules and protocols are included in all builds
- Files with TXFLASH in the name are built with a bootloader for flashing from a transmitter OR via the module's USB port (eg. Multi-STM_TXFLASH_INV-vX.X.X.XX.bin) - Files with TXFLASH in the name are built with a bootloader for flashing from a transmitter OR via the module's USB port (eg. Multi-STM_TXFLASH_INV-vX.X.X.XX.bin)
- Files with FTDI in the name are built without a bootloader for flashing using an FTDI adapter (eg. Multi-STM_FTDI_INV-vX.X.X.XX.bin) - Files with FTDI in the name are built without a bootloader for flashing using an FTDI adapter (eg. Multi-STM_FTDI_INV-vX.X.X.XX.bin)
@ -76,7 +74,7 @@ After a succesful flash your Module is now updated to the newer version firmware
Multiprotocol firmware can be compiled and flashed with your customized firmware using the Arduino IDE. The guide below will walk you through all the steps in many details, don't be afraid by the length it is in fact simple! Multiprotocol firmware can be compiled and flashed with your customized firmware using the Arduino IDE. The guide below will walk you through all the steps in many details, don't be afraid by the length it is in fact simple!
### Install the Arduino IDE ### Install the Arduino IDE
1. Download and install the Arduino IDE. The currently supported Arduino version is 1.8.5, available for [Windows]( https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-windows.exe), [Mac OSX](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-macosx.zip) and [Linux (64-bit)](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.5-linux64.tar.xz) 1. Download and install the Arduino IDE. The currently supported Arduino version is 1.8.9, available for [Windows]( https://www.arduino.cc/download_handler.php?f=/arduino-1.8.9-windows.exe), [Mac OSX](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.9-macosx.zip) and [Linux (64-bit)](https://www.arduino.cc/download_handler.php?f=/arduino-1.8.9-linux64.tar.xz)
1. It is recommended to upgrade Java to the [latest version](https://www.java.com/en/download/) 1. It is recommended to upgrade Java to the [latest version](https://www.java.com/en/download/)
### Download the Multiprotocol source and open the project ### Download the Multiprotocol source and open the project
@ -90,6 +88,7 @@ Multiprotocol firmware can be compiled and flashed with your customized firmware
### Configure the Arduino IDE ### Configure the Arduino IDE
1. Under **Tools -> Board** select **Multi 4-in-1 (STM32FC103)** 1. Under **Tools -> Board** select **Multi 4-in-1 (STM32FC103)**
1. Under **Tools -> Debug Options** select **None**
## Configure the firmware ## Configure the firmware
The STM32 module has more than enough flash space for all the available protocols so, unlike the Atmega328p-based module, it is not necessary to disable unused protocols. The STM32 module has more than enough flash space for all the available protocols so, unlike the Atmega328p-based module, it is not necessary to disable unused protocols.
@ -108,7 +107,7 @@ Global variables use 4064 bytes (19%) of dynamic memory, leaving 16416 bytes for
``` ```
You can proceed to the next step. You can proceed to the next step.
## Connecting the module ## Connect the module
### USB port ### USB port
Ensure that you [installed the necessary drivers](https://github.com/benlye/DIY-Multiprotocol-TX-Module/blob/doc-updates/docs/Arduino_IDE_Boards.md#install-device-drivers). Ensure that you [installed the necessary drivers](https://github.com/benlye/DIY-Multiprotocol-TX-Module/blob/doc-updates/docs/Arduino_IDE_Boards.md#install-device-drivers).
@ -147,7 +146,7 @@ In order to flash the bootloader the **BOOT0** jumper must be installed connecti
1. Install the **BOOT0** jumper as described above. 1. Install the **BOOT0** jumper as described above.
1. Switch on the transmitter 1. Switch on the transmitter
## Flashing the firmware ## Upload the firmware
1. In the Arduino IDE click **Sketch -> Upload**, or press **Ctrl+U** 1. In the Arduino IDE click **Sketch -> Upload**, or press **Ctrl+U**
## Exporting compiled firmware ## Exporting compiled firmware