gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 15:58:12 +00:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
pascallanger 2015-12-28 22:59:07 +01:00
parent b3884bed6e
commit 9b312e846d
1 changed files with 32 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

45
README.md
View File

@ -49,9 +49,9 @@ To enable telemetry on Turnigy 9X or 9XR you need to modify your TX following on
##Protocols
###TX ID
Each protocol is using a 32bits random ID generated at first power up.
Each protocol is using a 32bits ID generated randomely at first power up. There are little chances to get a duplicated ID.
It's possible to generate a new ID using bind on the Hubsan protocol.
It's possible to generate a new ID using bind button on the Hubsan protocolduring power up.
###Bind
To bind a model press the bind button, apply power and then release.
@ -63,23 +63,23 @@ Dial|Protocol|Sub_protocol|RF Module
----|--------|------------|---------
0|Select serial||
1|FLYSKY|Flysky|A7105
2|HUBSAN|0|A7105
3|FRSKY|0|CC2500
2|HUBSAN|-|A7105
3|FRSKY|-|CC2500
4|HISKY|Hisky|NRF24L01
5|V2X2|0|NRF24L01
5|V2X2|-|NRF24L01
6|DSM2|DSM2|CYRF6936
7|DEVO|0|CYRF6936
8|YD717|YD717
9|KN|0|NRF24L01
7|DEVO|-|CYRF6936
8|YD717|YD717|NRF24L01
9|KN|-|NRF24L01
10|SYMAX|SYMAX|NRF24L01
11|SLT|0|NRF24L01
11|SLT|-|NRF24L01
12|CX10|CX10_BLUE|NRF24L01
13|CG023|CG023|NRF24L01
14|BAYANG|0|NRF24L01
14|BAYANG|-|NRF24L01
15|SYMAX|SYMAX5C|NRF24L01
Notes:
- The selection must be done before the power is applied.
- The dial selection must be done before the power is applied.
- The protocols and subprotocols can be personnalized by modifying the source code.
####Using serial input with er9x/ersky9x
@ -121,7 +121,7 @@ CG023||NRF24L01
Bayang||NRF24L01
Note:
- The dial should be set to 0 for serial which means all protocol selection pins should be left unconnected
- The dial should be set to 0 for serial which means all protocol selection pins should be left unconnected.
###Protocol channels
####BAYANG
@ -131,6 +131,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP|HEADLESS|RTH
Autobind protocol / do not need to use the bind button
####CG023
All channels allow -100%..+100%
@ -154,6 +156,8 @@ A|E|T|R|FLIP|MODE|PICTURE|VIDEO|HEADLESS
MODE +100%=mode3 or headless for CX-10A, -100%=mode1, 0%=mode2
Autobind protocol / do not need to use the bind button
####DEVO
All channels allow -125%..+125%
@ -226,6 +230,8 @@ Option=vTX frequency (H107D) 5645 - 5900 MHz
Telemetry enabled for battery voltage only
Autobind protocol / do not need to use the bind button
####KN
All channels allow -100%..+100%
@ -242,6 +248,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|GEAR|PITCH
Autobind protocol / do not need to use the bind button
####Symax
All channels allow -100%..+100%
@ -249,6 +257,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP||PICTURE|VIDEO|HEADLESS
Autobind protocol / do not need to use the bind button
####V2X2
All channels allow -100%..+100%
@ -263,6 +273,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14|CH15|CH16
---|---|---|---|---|---|---|---|---|----|----|----|----|----|----|----
A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS
Autobind protocol / do not need to use the bind button
##Hardware
###RF modules
@ -278,10 +290,17 @@ You also need some [antennas](http://www.banggood.com/2_4GHz-3dBi-RP-SMA-Connect
###Microcontroller
The main program is running on a ATMEGA328 running @16MHz and 3.3V.
An [Arduino pro mini](http://www.banggood.com/Wholesale-New-Ver-Pro-Mini-ATMEGA328-328p-5V-16MHz-Arduino-Compatible-Nano-Size-p-68534.html) can be used to build your Multimodule:
An [Arduino pro mini](http://www.banggood.com/Wholesale-New-Ver-Pro-Mini-ATMEGA328-328p-5V-16MHz-Arduino-Compatible-Nano-Size-p-68534.html) can be used to build your own Multimodule.
Using stripboard:
![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t8214655-87-thumb-uploadfromtaptalk1405598143749.jpg?d=1441459923)
Using a [home made PCB](http://www.rcgroups.com/forums/showpost.php?p=32645328&postcount=1621):
![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8226719-72-thumb-IMG_20150715_230024065.jpg?d=1441816456)
![Screenshot](http://static.rcgroups.net/forums/attachments/1/1/5/4/3/7/t8226720-197-thumb-IMG_20150715_230603155.jpg?d=1441816457)
or build your own board using SMD components and an associated PCB:
![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/t7952726-108-thumb-image-62c29cf2.jpg?d=1433909893)