New H36 protocol - 1 ID

Lua_scripts/MultiChan.txt

@@ -227,3 +227,4 @@
 98,0,Kyosho3,ASF,0
 100,0,YuXiang,Std,0,Lock,Rate,Land,Manual,Flip,Mode,Pitch
 102,0,JIABAILE,Std,1,Speed,Light,Flash
+103,0,H36,Std,1,Flip,HLess,RTH

Multiprotocol/H36_nrf24l01.ino

@@ -0,0 +1,129 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#if defined(H36_NRF24L01_INO)
+
+#include "iface_xn297.h"
+
+#define FORCE_H36_ORIGINAL_ID
+
+#define H36_PAYLOAD_SIZE		13
+#define H36_RF_NUM_CHANNELS		4
+#define H36_BIND_PACKET_PERIOD	10285
+#define H36_BIND_COUNT			648		//3sec
+
+enum {
+	H36_DATA1=0,
+	H36_DATA2,
+	H36_DATA3,
+	H36_DATA4,
+};
+
+static void __attribute__((unused)) H36_send_packet()
+{
+	if(IS_BIND_DONE && phase == H36_DATA1)
+	{
+		hopping_frequency_no++;
+		hopping_frequency_no&=3;
+		XN297_Hopping(hopping_frequency_no);
+	}
+
+	packet[0] = 0x2E; 							// constant?
+	memcpy(&packet[2],rx_tx_addr,3);
+	if(IS_BIND_IN_PROGRESS)
+	{//Bind
+		memcpy(&packet[5],hopping_frequency,4);
+		memset(&packet[9], 0x00, 3);
+		packet[12] = 0xED; 						// constant?
+		bind_counter--;
+		if(bind_counter == 0)
+			BIND_DONE;
+	}
+	else
+	{//Normal
+		packet[5] = convert_channel_8b(THROTTLE);
+		packet[6] = convert_channel_8b(RUDDER);
+		packet[7] = convert_channel_8b(ELEVATOR);
+		packet[8] = convert_channel_8b(AILERON);
+		packet[9] = GET_FLAG(CH6_SW,  0x02)		//Headless
+				   |GET_FLAG(CH7_SW,  0x04);	//RTH(temporary)
+		packet[10] = 0x20; 						//Trim A centered(0x20)
+		packet[11] = CH5_SW?0x60:0x20;			//Flip(0x40)|Trim E centered(0x20)
+		packet[12] = 0xA0; 						//High(0x80)/Low(0x40) rates|Trim R centered(0x20)?
+	}
+	//crc
+	packet[1]=0xAA;
+	for(uint8_t i=5;i<12;i++)
+		packet[1] ^= packet[i];
+	//Send
+	XN297_SetPower();
+	XN297_SetTxRxMode(TX_EN);
+	XN297_WritePayload(packet, H36_PAYLOAD_SIZE);
+	#ifdef DEBUG_SERIAL
+		debug("H%d P",hopping_frequency_no);
+		for(uint8_t i=0; i < H36_PAYLOAD_SIZE; i++)
+			debug(" %02X", packet[i]);
+		debugln();
+	#endif
+}
+
+static void __attribute__((unused)) H36_initialize_txid()
+{
+	rx_tx_addr[0] = rx_tx_addr[3];
+	calc_fh_channels(4);
+	#ifdef FORCE_H36_ORIGINAL_ID
+		memcpy(rx_tx_addr,(uint8_t *)"\x00\x11\x00",3);
+		memcpy(hopping_frequency,(uint8_t *)"\x36\x3A\x31\x2B",4);	//54, 58, 49, 43 
+	#endif
+}
+
+static void __attribute__((unused)) H36_RF_init()
+{
+	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, XN297_1M);
+	XN297_SetTXAddr((uint8_t*)"\xCC\x6C\x47\x90\x53", 5);
+	XN297_RFChannel(50);		//Bind channel
+}
+
+uint16_t H36_callback()
+{
+	H36_send_packet();
+	switch(phase)
+	{
+		case H36_DATA1:
+			phase++;
+			return 1830;
+		case H36_DATA2:
+		case H36_DATA3:
+			phase++;
+			return 3085;
+		default://DATA4
+			#ifdef MULTI_SYNC
+				telemetry_set_input_sync(18500);
+			#endif
+			phase = H36_DATA1;
+			break;
+	}
+	return 10500;
+}
+
+void H36_init()
+{
+	BIND_IN_PROGRESS;	// Autobind protocol
+	H36_initialize_txid();
+	H36_RF_init();
+	phase = H36_DATA1;
+	hopping_frequency_no = 0;
+	bind_counter = H36_BIND_COUNT;
+}
+#endif

Multiprotocol/Multi.txt

@@ -98,3 +98,4 @@
 99,XK2
 100,YuXiang
 102,JIABAILE
+103,H36

Multiprotocol/Multi_Protos.ino

@@ -55,6 +55,7 @@ const char STR_DM002[]		="DM002";
 const char STR_CABELL[]		="Cabell";
 const char STR_ESKY150[]	="Esky150";
 const char STR_ESKY150V2[]	="EskyV2";
+const char STR_H36[]		="H36";
 const char STR_H8_3D[]		="H8 3D";
 const char STR_CORONA[]		="Corona";
 const char STR_CFLIE[]		="CFlie";
@@ -349,6 +350,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(GW008_NRF24L01_INO)
 		{PROTO_GW008,      STR_GW008,     NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    GW008_init,      GW008_callback      },
 	#endif
+	#if defined(H36_NRF24L01_INO)
+		{PROTO_H36,        STR_H36,       NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_NRF,    H36_init,        H36_callback        },
+	#endif
 	#if defined(H8_3D_NRF24L01_INO)
 		{PROTO_H8_3D,      STR_H8_3D,     STR_SUBTYPE_H83D,      4, OPTION_NONE,    0, 0, SW_NRF,    H8_3D_init,      H8_3D_callback      },
 	#endif

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	4
-#define VERSION_PATCH_LEVEL	24
+#define VERSION_PATCH_LEVEL	25
 
 #define MODE_SERIAL 0
 
@@ -130,6 +130,7 @@ enum PROTOCOLS
 	PROTO_YUXIANG	= 100,	// =>NRF24L01
 	PROTO_PINECONE	= 101,	// =>CC2500 & NRF24L01
 	PROTO_JIABAILE	= 102,	// =>NRF24L01
+	PROTO_H36		= 103,	// =>NRF24L01
 	
 	PROTO_NANORF	= 126,	// =>NRF24L01
 	PROTO_TEST		= 127,	// =>CC2500

Multiprotocol/Validate.h

@@ -321,6 +321,7 @@
 	#undef	FY326_NRF24L01_INO
 	#undef	GW008_NRF24L01_INO
 	#undef	H8_3D_NRF24L01_INO
+	#undef	H36_NRF24L01_INO
 	#undef	HISKY_NRF24L01_INO
 	#undef	HONTAI_NRF24L01_INO
 	#undef	JIABAILE_NRF24L01_INO
@@ -423,6 +424,7 @@
 	#undef	GW008_NRF24L01_INO
 	#undef	HONTAI_NRF24L01_INO
 	#undef	H8_3D_NRF24L01_INO
+	#undef	H36_NRF24L01_INO
 	#undef	JJRC345_NRF24L01_INO
 	#undef	KN_NRF24L01_INO
 	#undef	LOLI_NRF24L01_INO

Multiprotocol/_Config.h

@@ -240,9 +240,10 @@
 #define	FX_NRF24L01_INO
 #define	FY326_NRF24L01_INO
 #define	GW008_NRF24L01_INO
+#define	H36_NRF24L01_INO
+#define	H8_3D_NRF24L01_INO
 #define	HISKY_NRF24L01_INO
 #define	HONTAI_NRF24L01_INO
-#define	H8_3D_NRF24L01_INO
 #define JIABAILE_NRF24L01_INO
 #define	JJRC345_NRF24L01_INO
 #define	KN_NRF24L01_INO
@@ -702,6 +703,7 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		GD_V2
 	PROTO_GW008
 		NONE
+	PROTO_H36
 	PROTO_H8_3D
 		H8_3D
 		H20H

Protocols_Details.md

@@ -103,6 +103,7 @@ CFlie|38|CFlie||||||||NRF24L01|
 [FY326](Protocols_Details.md#FY326---20)|20|FY326|FY319|||||||NRF24L01|
 [GD00X](Protocols_Details.md#GD00X---47)|47|GD_V1*|GD_V2*|||||||NRF24L01|XN297L
 [GW008](Protocols_Details.md#GW008---32)|32|||||||||NRF24L01|XN297
+[H36](Protocols_Details.md#H36---103)|H36|||||||||NRF24L01|XN297
 [H8_3D](Protocols_Details.md#H8_3D---36)|36|H8_3D|H20H|H20Mini|H30Mini|||||NRF24L01|XN297
 [Height](Protocols_Details.md#HEIGHT---53)|53|5ch|8ch|||||||A7105|
 [Hisky](Protocols_Details.md#HISKY---4)|4|Hisky|HK310|||||||NRF24L01|
@@ -1839,15 +1840,24 @@ CH1|CH2|CH3|CH4|CH5
 ---|---|---|---|---
 A|E|T|R|FLIP
 
+## H36 - *103*
+Autobind protocol
+
+Model: JJRC H36 (JR-NH010R9 board)
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7
+---|---|---|---|---|---|---
+A|E|T|R|FLIP|HEADLESS|RTH
+
 ## H8_3D - *36*
 Autobind protocol
 
 ### Sub_protocol H8_3D - *0*
 Models: Eachine H8 mini 3D,Eachine E10, JJRC H20/H22/H11D
 
-CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13
----|---|---|---|---|---|---|---|---
+---|---|---|---|---|---|---|---|---|---|---|---|---
-FLIP|LIGTH|PICTURE|VIDEO|OPT1|OPT2|CAL1|CAL2|GIMBAL
+A|E|T|R|FLIP|LIGTH|PICTURE|VIDEO|OPT1|OPT2|CAL1|CAL2|GIMBAL
 
 JJRC H20: OPT1=Headless, OPT2=RTH