mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-03-16 13:59:13 +00:00
Update Transmitters.md
This commit is contained in:
parent
e5e529d3d2
commit
977f5ca9ce
@ -51,9 +51,9 @@ Transmitters and firmware combinations that support the Serial protocol are:
|
|||||||
Transmitter|Firmware Options|Telemetry Enabled
|
Transmitter|Firmware Options|Telemetry Enabled
|
||||||
:----------|:---------------|:----------------
|
:----------|:---------------|:----------------
|
||||||
[FrSky Taranis/Plus/9XE](Tx-Taranis.md)| erSky9x, OpenTx 2.1.8 Multi|Yes - native
|
[FrSky Taranis/Plus/9XE](Tx-Taranis.md)| erSky9x, OpenTx 2.1.8 Multi|Yes - native
|
||||||
[Turnigy 9X/9xR](Tx-FlyskyTH9X.md)|er9x|[Mod required](http://blog.oscarliang.net/turnigy-9x-advance-mod/), No DSM telem
|
[Turnigy 9X/9xR](Tx-FlyskyTH9X.md)|er9x|[Mod required](#Telemetry_Mod), No DSM telem
|
||||||
[Turnigy 9XR-Pro](Tx-erSky9X.md)|erSky9x|Yes - native
|
[Turnigy 9XR-Pro](Tx-erSky9X.md)|erSky9x|Yes - native
|
||||||
[FrSky TH9x](Tx-FlyskyTH9X.md)|er9x|[Mod required](http://blog.oscarliang.net/turnigy-9x-advance-mod/), No DSM telem
|
[FrSky TH9x](Tx-FlyskyTH9X.md)|er9x|[Mod required](#Telemetry_Mod), No DSM telem
|
||||||
[SKY board](Tx-erSky9X.md)|erSky9x|Yes - native
|
[SKY board](Tx-erSky9X.md)|erSky9x|Yes - native
|
||||||
[AR9X board](Tx-erSky9X.md)|erSky9x|Yes - native
|
[AR9X board](Tx-erSky9X.md)|erSky9x|Yes - native
|
||||||
[9Xtreme board](Tx-erSky9X.md)|erSky9x|Yes - native
|
[9Xtreme board](Tx-erSky9X.md)|erSky9x|Yes - native
|
||||||
@ -61,6 +61,14 @@ Transmitter|Firmware Options|Telemetry Enabled
|
|||||||
|
|
||||||
Click on your transmitter above to view specific setup instructions.
|
Click on your transmitter above to view specific setup instructions.
|
||||||
|
|
||||||
|
<a name="Telemetry_Mod"></a>##Optional Telemetry mod for 9X/r TH9X transmitters
|
||||||
|
The telemetry mod for these transmitters has evolved. The original and popular "FrSky Telemetry Mod" requires 2 pins on the transmitter module board to be modified (RX on pin 5 and TX on pin 2). All the recent MPTM hardware options supports serial transmission on pin 1 (the same pin as the PPM signal) so, in this case, only the mod on pin 5 is required.
|
||||||
|
|
||||||
|
A good tutorial to follow is Oscar Liang's [here](http://blog.oscarliang.net/turnigy-9x-advance-mod/) but when you get to wiring up the Tx Module bay pins, you only need to perform the steps relevant for Pin 5.
|
||||||
|
|
||||||
|
You can see Midelic's original instructions [here](http://www.rcgroups.com/forums/showpost.php?p=28359305&postcount=2)
|
||||||
|
|
||||||
|
|
||||||
Other Notes:
|
Other Notes:
|
||||||
- er9X and erSky9X firmware already supports Multiprotocol Module as a standard feature. At time of writing it looks like that the next major release of OpenTx - OpenTx 2.2 - will have DIY Mulitprotocol support as a standard feature.
|
- er9X and erSky9X firmware already supports Multiprotocol Module as a standard feature. At time of writing it looks like that the next major release of OpenTx - OpenTx 2.2 - will have DIY Mulitprotocol support as a standard feature.
|
||||||
|
|
||||||
@ -73,3 +81,4 @@ Other Notes:
|
|||||||
- Enabling telemetry on a 9XR PRO and may be other TXs does not require any hardware modifications. The additional required serial pin is already available on the TX back module pins.
|
- Enabling telemetry on a 9XR PRO and may be other TXs does not require any hardware modifications. The additional required serial pin is already available on the TX back module pins.
|
||||||
|
|
||||||
- Once the TX is telemetry enabled, it just needs to be configured on the model (see er9x/ersky9x documentation).
|
- Once the TX is telemetry enabled, it just needs to be configured on the model (see er9x/ersky9x documentation).
|
||||||
|
|
||||||
|
Loading…
x
Reference in New Issue
Block a user