mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 16:38:12 +00:00
Kyosho: new protocol
This commit is contained in:
Pascal Langer
parent
64419a6cf4
commit
930c26a111
@ -94,7 +94,8 @@
|
||||
26,1,Hontai,JJRCX1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
|
||||
26,2,Hontai,X5C1,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
|
||||
26,3,Hontai,FQ777_951,1,Flip,Arm,Pict,Video,HLess,RTH,Calib
|
||||
57,0,HoTT,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
|
||||
57,0,HoTT,Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
|
||||
57,1,HoTT,No_Sync,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12
|
||||
2,0,Hubsan,H107,1,Flip,Light,Pict,Video,HLess
|
||||
2,1,Hubsan,H301,0,RTH,Light,Stab,Video
|
||||
2,2,Hubsan,H501,0,RTH,Light,Pict,Video,HLess,GPS_H,ALT_H,Flip,FModes
|
||||
@ -103,6 +104,7 @@
|
||||
49,0,KF606,Std,1,Trim
|
||||
9,0,KN,WLToys,0,DRate,THold,IdleUp,Gyro,Ttrim,Atrim,Etrim
|
||||
9,1,KN,Feilun,0,DRate,THold,IdleUp,Gyro,Ttrim,Atrim,Etrim
|
||||
73,0,Kyosho,Std,0,CH5,CH6,CH7,CH8,CH9,CH10,CH11,CH12,CH13,CH14
|
||||
18,0,MJXQ,WHL08,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
|
||||
18,1,MJXQ,X600,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
|
||||
18,2,MJXQ,X800,1,Flip,LED,Pict,Video,HLess,RTH,AuFlip,Pan,Tilt,Rate
|
||||
|
||||
@ -202,6 +202,11 @@ void A7105_AdjustLOBaseFreq(uint8_t cmd)
|
||||
offset=(int16_t)FORCE_PELIKAN_TUNING;
|
||||
#endif
|
||||
break;
|
||||
case PROTO_KYOSHO:
|
||||
#ifdef FORCE_KYOSHO_TUNING
|
||||
offset=(int16_t)FORCE_KYOSHO_TUNING;
|
||||
#endif
|
||||
break;
|
||||
case PROTO_AFHDS2A:
|
||||
case PROTO_AFHDS2A_RX:
|
||||
#ifdef FORCE_AFHDS2A_TUNING
|
||||
@ -306,6 +311,14 @@ const uint8_t PROGMEM PELIKAN_A7105_regs[] = {
|
||||
0x01, 0x0f // 30 - 31
|
||||
};
|
||||
#endif
|
||||
#ifdef KYOSHO_A7105_INO
|
||||
const uint8_t PROGMEM KYOSHO_A7105_regs[] = {
|
||||
0xff, 0x42, 0xff, 0x25, 0x00, 0xff, 0xff ,0x00, 0x00, 0x00, 0x00, 0x01, 0x21, 0x05, 0x00, 0x50, // 00 - 0f
|
||||
0x9e, 0x4b, 0x00, 0x02, 0x16, 0x2b, 0x12, 0x40, 0x62, 0x80, 0x80, 0x00, 0x0a, 0x32, 0x03, 0x1f, // 10 - 1f
|
||||
0x1e, 0x00, 0x00, 0xff, 0x00, 0x00, 0x23, 0x70, 0x1F, 0x47, 0x80, 0x57, 0x01, 0x45, 0x19, 0x00, // 20 - 2f
|
||||
0x01, 0x0f // 30 - 31
|
||||
};
|
||||
#endif
|
||||
|
||||
#define ID_NORMAL 0x55201041
|
||||
#define ID_PLUS 0xAA201041
|
||||
@ -348,13 +361,15 @@ void A7105_Init(void)
|
||||
#ifdef FLYSKY_A7105_INO
|
||||
if(protocol==PROTO_FLYSKY)
|
||||
A7105_Regs=(uint8_t*)FLYSKY_A7105_regs;
|
||||
else
|
||||
#endif
|
||||
{
|
||||
#if defined(AFHDS2A_A7105_INO) || defined(AFHDS2A_RX_A7105_INO)
|
||||
A7105_Regs=(uint8_t*)AFHDS2A_A7105_regs;
|
||||
#endif
|
||||
}
|
||||
#if defined(AFHDS2A_A7105_INO) || defined(AFHDS2A_RX_A7105_INO)
|
||||
if(protocol==PROTO_AFHDS2A)
|
||||
A7105_Regs=(uint8_t*)AFHDS2A_A7105_regs;
|
||||
#endif
|
||||
#ifdef KYOSHO_A7105_INO
|
||||
if(protocol==PROTO_KYOSHO)
|
||||
A7105_Regs=(uint8_t*)KYOSHO_A7105_regs;
|
||||
#endif
|
||||
}
|
||||
|
||||
for (uint8_t i = 0; i < 0x32; i++)
|
||||
@ -373,54 +388,68 @@ void A7105_Init(void)
|
||||
}
|
||||
A7105_Strobe(A7105_STANDBY);
|
||||
|
||||
//IF Filter Bank Calibration
|
||||
A7105_WriteReg(A7105_02_CALC,1);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
// A7105_ReadReg(A7105_22_IF_CALIB_I);
|
||||
// A7105_ReadReg(A7105_24_VCO_CURCAL);
|
||||
|
||||
if(protocol!=PROTO_HUBSAN)
|
||||
{
|
||||
//VCO Current Calibration
|
||||
A7105_WriteReg(A7105_24_VCO_CURCAL,0x13); //Recommended calibration from A7105 Datasheet
|
||||
//VCO Bank Calibration
|
||||
A7105_WriteReg(A7105_26_VCO_SBCAL_II,0x3b); //Recommended calibration from A7105 Datasheet
|
||||
if(protocol==PROTO_KYOSHO)
|
||||
{//strange calibration...
|
||||
//IF Filter Bank Calibration
|
||||
A7105_WriteReg(A7105_02_CALC,0x0F);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
// A7105_ReadReg(A7105_22_IF_CALIB_I);
|
||||
// A7105_ReadReg(A7105_24_VCO_CURCAL);
|
||||
// A7105_ReadReg(25_VCO_SBCAL_I);
|
||||
// A7105_ReadReg(1A_RX_GAIN_II);
|
||||
// A7105_ReadReg(1B_RX_GAIN_III);
|
||||
}
|
||||
|
||||
//VCO Bank Calibrate channel 0
|
||||
A7105_WriteReg(A7105_0F_CHANNEL, 0);
|
||||
A7105_WriteReg(A7105_02_CALC,2);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
vco_calibration0 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
|
||||
|
||||
//VCO Bank Calibrate channel A0
|
||||
A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
|
||||
A7105_WriteReg(A7105_02_CALC, 2);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
vco_calibration1 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
|
||||
|
||||
if(protocol==PROTO_BUGS)
|
||||
A7105_SetVCOBand(vco_calibration0 & 0x07, vco_calibration1 & 0x07); // Set calibration band value to best match
|
||||
else
|
||||
{
|
||||
//IF Filter Bank Calibration
|
||||
A7105_WriteReg(A7105_02_CALC,1);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
// A7105_ReadReg(A7105_22_IF_CALIB_I);
|
||||
// A7105_ReadReg(A7105_24_VCO_CURCAL);
|
||||
|
||||
if(protocol!=PROTO_HUBSAN)
|
||||
{
|
||||
switch(protocol)
|
||||
{
|
||||
case PROTO_FLYSKY:
|
||||
vco_calibration1=0x08;
|
||||
break;
|
||||
case PROTO_FLYZONE:
|
||||
vco_calibration1=0x02;
|
||||
break;
|
||||
case PROTO_PELIKAN:
|
||||
vco_calibration1=0x0C;
|
||||
break;
|
||||
default:
|
||||
vco_calibration1=0x0A;
|
||||
break;
|
||||
}
|
||||
A7105_WriteReg(A7105_25_VCO_SBCAL_I,vco_calibration1); //Reset VCO Band calibration
|
||||
//VCO Current Calibration
|
||||
A7105_WriteReg(A7105_24_VCO_CURCAL,0x13); //Recommended calibration from A7105 Datasheet
|
||||
//VCO Bank Calibration
|
||||
A7105_WriteReg(A7105_26_VCO_SBCAL_II,0x3b); //Recommended calibration from A7105 Datasheet
|
||||
}
|
||||
|
||||
//VCO Bank Calibrate channel 0
|
||||
A7105_WriteReg(A7105_0F_CHANNEL, 0);
|
||||
A7105_WriteReg(A7105_02_CALC,2);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
vco_calibration0 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
|
||||
|
||||
//VCO Bank Calibrate channel A0
|
||||
A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
|
||||
A7105_WriteReg(A7105_02_CALC, 2);
|
||||
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
|
||||
vco_calibration1 = A7105_ReadReg(A7105_25_VCO_SBCAL_I);
|
||||
|
||||
if(protocol==PROTO_BUGS)
|
||||
A7105_SetVCOBand(vco_calibration0 & 0x07, vco_calibration1 & 0x07); // Set calibration band value to best match
|
||||
else
|
||||
if(protocol!=PROTO_HUBSAN)
|
||||
{
|
||||
switch(protocol)
|
||||
{
|
||||
case PROTO_FLYSKY:
|
||||
vco_calibration1=0x08;
|
||||
break;
|
||||
case PROTO_FLYZONE:
|
||||
vco_calibration1=0x02;
|
||||
break;
|
||||
case PROTO_PELIKAN:
|
||||
vco_calibration1=0x0C;
|
||||
break;
|
||||
default:
|
||||
vco_calibration1=0x0A;
|
||||
break;
|
||||
}
|
||||
A7105_WriteReg(A7105_25_VCO_SBCAL_I,vco_calibration1); //Reset VCO Band calibration
|
||||
}
|
||||
}
|
||||
A7105_SetTxRxMode(TX_EN);
|
||||
A7105_SetPower();
|
||||
|
||||
|
||||
116
Multiprotocol/Kyosho_a7105.ino
Normal file
116
Multiprotocol/Kyosho_a7105.ino
Normal file
@ -0,0 +1,116 @@
|
||||
/*
|
||||
This project is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Multiprotocol is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#if defined(KYOSHO_A7105_INO)
|
||||
|
||||
#include "iface_a7105.h"
|
||||
|
||||
//#define KYOSHO_FORCE_ID
|
||||
|
||||
//Kyosho constants & variables
|
||||
#define KYOSHO_BIND_COUNT 2500
|
||||
|
||||
static void __attribute__((unused)) kyosho_send_packet()
|
||||
{
|
||||
//ID
|
||||
packet[1] = rx_tx_addr[0];
|
||||
packet[2] = rx_tx_addr[1];
|
||||
packet[3] = rx_tx_addr[2];
|
||||
packet[4] = rx_tx_addr[3];
|
||||
//unknown may be RX ID on some other remotes
|
||||
memset(packet+5,0xFF,4);
|
||||
|
||||
if(IS_BIND_IN_PROGRESS)
|
||||
{
|
||||
packet[ 0] = 0xBC; // bind indicator
|
||||
packet[ 9] &= 0x01;
|
||||
packet[ 9] ^= 0x01; // high/ low part of the RF table
|
||||
packet[10] = 0x00;
|
||||
//RF table
|
||||
for(uint8_t i=0; i<16;i++)
|
||||
packet[i+11]=hopping_frequency[i+(packet[9]<<4)];
|
||||
//unknwon
|
||||
packet[27] = 0x05;
|
||||
packet[28] = 0x00;
|
||||
memset(packet+29,0xFF,8);
|
||||
//frequency hop during bind
|
||||
if(packet[9])
|
||||
rf_ch_num=0x8C;
|
||||
else
|
||||
rf_ch_num=0x0D;
|
||||
}
|
||||
else
|
||||
{
|
||||
packet[ 0] = 0x58; // normal packet
|
||||
//14 channels: steering, throttle, ...
|
||||
for(uint8_t i = 0; i < 14; i++)
|
||||
{
|
||||
uint16_t temp=convert_channel_ppm(i);
|
||||
packet[9 + i*2]=temp&0xFF; // low byte of servo timing(1000-2000us)
|
||||
packet[10 + i*2]=(temp>>8)&0xFF; // high byte of servo timing(1000-2000us)
|
||||
}
|
||||
rf_ch_num=hopping_frequency[hopping_frequency_no];
|
||||
hopping_frequency_no++;
|
||||
packet[34] |= (hopping_frequency_no&0x0F)<<4;
|
||||
packet[36] |= (hopping_frequency_no&0xF0); // last byte is ending with F on the dumps so let's see
|
||||
hopping_frequency_no &= 0x1F;
|
||||
}
|
||||
// debug("ch=%02X P=",rf_ch_num);
|
||||
// for(uint8_t i=0; i<37; i++)
|
||||
// debug("%02X ", packet[i]);
|
||||
// debugln("");
|
||||
A7105_WriteData(37, rf_ch_num);
|
||||
}
|
||||
|
||||
uint16_t ReadKyosho()
|
||||
{
|
||||
#ifndef FORCE_KYOSHO_TUNING
|
||||
A7105_AdjustLOBaseFreq(1);
|
||||
#endif
|
||||
if(IS_BIND_IN_PROGRESS)
|
||||
{
|
||||
bind_counter--;
|
||||
if (bind_counter==0)
|
||||
BIND_DONE;
|
||||
}
|
||||
else
|
||||
{
|
||||
A7105_SetPower();
|
||||
#ifdef MULTI_SYNC
|
||||
telemetry_set_input_sync(3852);
|
||||
#endif
|
||||
}
|
||||
kyosho_send_packet();
|
||||
return 3852;
|
||||
}
|
||||
|
||||
uint16_t initKyosho()
|
||||
{
|
||||
A7105_Init();
|
||||
|
||||
// compute 32 channels from ID
|
||||
calc_fh_channels(32);
|
||||
hopping_frequency_no=0;
|
||||
|
||||
#ifdef KYOSHO_FORCE_ID
|
||||
memcpy(rx_tx_addr,"\x3A\x39\x37\x00",4);
|
||||
memcpy(hopping_frequency,"\x29\x4C\x67\x92\x31\x1C\x77\x18\x23\x6E\x81\x5C\x8F\x5A\x51\x94\x7A\x12\x45\x6C\x7F\x1E\x0D\x88\x63\x8C\x4F\x37\x26\x61\x2C\x8A",32);
|
||||
#endif
|
||||
|
||||
if(IS_BIND_IN_PROGRESS)
|
||||
bind_counter = KYOSHO_BIND_COUNT;
|
||||
return 2000;
|
||||
}
|
||||
#endif
|
||||
@ -69,4 +69,5 @@
|
||||
69,ESKYv2,150V2
|
||||
70,DSM_RX
|
||||
71,JJRC345
|
||||
72,Q90C
|
||||
72,Q90C
|
||||
73,Kyosho
|
||||
@ -86,6 +86,7 @@ const char STR_XN297DUMP[] ="XN297DP";
|
||||
const char STR_FRSKYR9[] ="FrSkyR9";
|
||||
const char STR_PROPEL[] ="Propel";
|
||||
const char STR_SKYARTEC[] ="Skyartc";
|
||||
const char STR_KYOSHO[] ="Kyosho";
|
||||
const char STR_TEST[] ="Test";
|
||||
const char STR_FAKE[] ="Fake";
|
||||
|
||||
@ -290,6 +291,9 @@ const mm_protocol_definition multi_protocols[] = {
|
||||
#if defined(KN_NRF24L01_INO)
|
||||
{PROTO_KN, STR_KN, 2, STR_SUBTYPE_KN, OPTION_NONE },
|
||||
#endif
|
||||
#if defined(KYOSHO_A7105_INO)
|
||||
{PROTO_KYOSHO, STR_KYOSHO, 0, NO_SUBTYPE, OPTION_NONE },
|
||||
#endif
|
||||
#if defined(MJXQ_NRF24L01_INO)
|
||||
{PROTO_MJXQ, STR_MJXQ, 7, STR_SUBTYPE_MJXQ, OPTION_RFTUNE },
|
||||
#endif
|
||||
|
||||
@ -19,7 +19,7 @@
|
||||
#define VERSION_MAJOR 1
|
||||
#define VERSION_MINOR 3
|
||||
#define VERSION_REVISION 1
|
||||
#define VERSION_PATCH_LEVEL 38
|
||||
#define VERSION_PATCH_LEVEL 39
|
||||
|
||||
//******************
|
||||
// Protocols
|
||||
@ -99,6 +99,7 @@ enum PROTOCOLS
|
||||
PROTO_DSM_RX = 70, // =>CYRF6936
|
||||
PROTO_JJRC345 = 71, // =>NRF24L01
|
||||
PROTO_Q90C = 72, // =>NRF24L01 or CC2500
|
||||
PROTO_KYOSHO = 73, // =>A7105
|
||||
|
||||
PROTO_FAKE = 126, // =>CC2500+NRF24L01
|
||||
PROTO_TEST = 127, // =>CC2500
|
||||
@ -796,6 +797,7 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
|
||||
DSM_RX 70
|
||||
JJRC345 71
|
||||
Q90C 72
|
||||
KYOSHO 73
|
||||
BindBit=> 0x80 1=Bind/0=No
|
||||
AutoBindBit=> 0x40 1=Yes /0=No
|
||||
RangeCheck=> 0x20 1=Yes /0=No
|
||||
|
||||
@ -1136,6 +1136,13 @@ static void protocol_init()
|
||||
remote_callback = ReadPelikan;
|
||||
break;
|
||||
#endif
|
||||
#if defined(KYOSHO_A7105_INO)
|
||||
case PROTO_KYOSHO:
|
||||
PE1_off; //antenna RF1
|
||||
next_callback = initKyosho();
|
||||
remote_callback = ReadKyosho;
|
||||
break;
|
||||
#endif
|
||||
#endif
|
||||
#ifdef CC2500_INSTALLED
|
||||
#if defined(FRSKYD_CC2500_INO)
|
||||
|
||||
@ -150,6 +150,11 @@
|
||||
#error "The Hubsan forced frequency tuning value is outside of the range -300..300."
|
||||
#endif
|
||||
#endif
|
||||
#ifdef FORCE_KYOSHO_TUNING
|
||||
#if ( FORCE_KYOSHO_TUNING < -300 ) || ( FORCE_KYOSHO_TUNING > 300 )
|
||||
#error "The Kyosho forced frequency tuning value is outside of the range -300..300."
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#ifndef USE_A7105_CH15_TUNING
|
||||
#ifndef FORCE_BUGS_TUNING
|
||||
@ -164,6 +169,9 @@
|
||||
#ifndef FORCE_PELIKAN_TUNING
|
||||
#define FORCE_PELIKAN_TUNING 0
|
||||
#endif
|
||||
#ifndef FORCE_KYOSHO_TUNING
|
||||
#define FORCE_KYOSHO_TUNING 0
|
||||
#endif
|
||||
#ifndef FORCE_HUBSAN_TUNING
|
||||
#define FORCE_HUBSAN_TUNING 0
|
||||
#endif
|
||||
@ -212,6 +220,7 @@
|
||||
#undef FLYSKY_A7105_INO
|
||||
#undef FLYZONE_A7105_INO
|
||||
#undef HUBSAN_A7105_INO
|
||||
#undef KYOSHO_A7105_INO
|
||||
#undef PELIKAN_A7105_INO
|
||||
#endif
|
||||
#ifndef CYRF6936_INSTALLED
|
||||
|
||||
@ -118,8 +118,9 @@
|
||||
//#define FORCE_BUGS_TUNING 0
|
||||
//#define FORCE_FLYSKY_TUNING 0
|
||||
//#define FORCE_FLYZONE_TUNING 0
|
||||
//#define FORCE_PELIKAN_TUNING 0
|
||||
//#define FORCE_HUBSAN_TUNING 0
|
||||
//#define FORCE_KYOSHO_TUNING 0
|
||||
//#define FORCE_PELIKAN_TUNING 0
|
||||
|
||||
/** CYRF6936 Fine Frequency Tuning **/
|
||||
//This is required in rare cases where some CYRF6936 modules and/or RXs have an inaccurate crystal oscillator.
|
||||
@ -170,6 +171,7 @@
|
||||
#define FLYSKY_A7105_INO
|
||||
#define FLYZONE_A7105_INO
|
||||
#define HUBSAN_A7105_INO
|
||||
#define KYOSHO_A7105_INO
|
||||
#define PELIKAN_A7105_INO
|
||||
|
||||
//The protocols below need a CYRF6936 to be installed
|
||||
@ -656,6 +658,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
|
||||
PROTO_KN
|
||||
WLTOYS
|
||||
FEILUN
|
||||
PROTO_KYOSHO
|
||||
NONE
|
||||
PROTO_MJXQ
|
||||
WLH08
|
||||
X600
|
||||
|
||||
@ -110,6 +110,7 @@ CFlie|38|CFlie||||||||NRF24L01|
|
||||
[JJRC345](Protocols_Details.md#JJRC345---71)|71|JJRC345||||||||NRF24L01|XN297
|
||||
[KF606](Protocols_Details.md#KF606---49)|49|KF606*||||||||NRF24L01|XN297
|
||||
[KN](Protocols_Details.md#KN---9)|9|WLTOYS|FEILUN|||||||NRF24L01|
|
||||
[Kyosho](Protocols_Details.md#Kyosho---73)|73|||||||||A7105|
|
||||
[MJXq](Protocols_Details.md#MJXQ---18)|18|WLH08|X600|X800|H26D|E010*|H26WH|PHOENIX*||NRF24L01|XN297
|
||||
[MT99xx](Protocols_Details.md#MT99XX---17)|17|MT|H7|YZ|LS|FY805||||NRF24L01|XN297
|
||||
[NCC1701](Protocols_Details.md#NCC1701---44)|44|NCC1701||||||||NRF24L01|
|
||||
@ -143,6 +144,19 @@ CFlie|38|CFlie||||||||NRF24L01|
|
||||
|
||||
If USE_A7105_CH15_TUNING is enabled, the value of channel 15 is used by all A7105 protocols for tuning the frequency. This is required in rare cases where some A7105 modules and/or RXs have an inaccurate crystal oscillator.
|
||||
|
||||
## BUGS - *41*
|
||||
Models: MJX Bugs 3, 6 and 8
|
||||
|
||||
Telemetry enabled for RX & TX RSSI, Battery voltage good/bad
|
||||
|
||||
**RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs. A maximum of 16 Bugs are supported.**
|
||||
|
||||
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
|
||||
---|---|---|---|---|---|---|---|---|---
|
||||
A|E|T|R|ARM|ANGLE|FLIP|PICTURE|VIDEO|LED
|
||||
|
||||
ANGLE: angle is +100%, acro is -100%
|
||||
|
||||
## FLYSKY - *1*
|
||||
Extended limits supported
|
||||
|
||||
@ -254,18 +268,12 @@ H122D: FLIP
|
||||
|
||||
H123D: FMODES -> -100%=Sport mode 1,0%=Sport mode 2,+100%=Acro
|
||||
|
||||
## BUGS - *41*
|
||||
Models: MJX Bugs 3, 6 and 8
|
||||
## Kyosho - *73*
|
||||
Transmiter: KT-531P and others
|
||||
|
||||
Telemetry enabled for RX & TX RSSI, Battery voltage good/bad
|
||||
|
||||
**RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs. A maximum of 16 Bugs are supported.**
|
||||
|
||||
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10
|
||||
---|---|---|---|---|---|---|---|---|---
|
||||
A|E|T|R|ARM|ANGLE|FLIP|PICTURE|VIDEO|LED
|
||||
|
||||
ANGLE: angle is +100%, acro is -100%
|
||||
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
|
||||
---|---|---|---|---|---|---|---|---|----|----|----|----|----
|
||||
Steering|T|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
|
||||
|
||||
## Pelikan - *60*
|
||||
Extended limits supported
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user