gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:28:15 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling.md

Browse Source
This commit is contained in:
pascallanger 2017-01-23 21:37:46 +01:00 committed by GitHub
parent e00731ef8f
commit 92fe975e3d
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Compiling.md
View File

@ -13,7 +13,7 @@ The procedure below will guide you through all the steps to upload successfully
## Upload the firmware
###Material you need to upload the firmware
1. USBASP programmer supporting 3.3V: <img src="images/USBasp_Programmer.jpeg" width="200" height="200" /> [(example ebay link)](http://www.ebay.fr/itm/USBasp-USBISP-10-Pin-USB-Programmer-3-3V-5V-w-Cable-51-AVR-Atmega8-Programmer-/282247870975?hash=item41b748b9ff:g:utUAAOSwKOJYHE0L)
1. USBASP programmer supporting 3.3V: <img src="USBasp_Programmer_jumper.png" width="200" height="200" /> [(example aliexpress link)](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs)
1. 10pin to 6pin adapter: <img src="images/10pin_2_6pin.JPG" width="150" height="150" /> [(example ebay link)](http://www.ebay.fr/itm/10-Pin-a-6-Pin-Carte-Adaptateur-M-F-pour-AVRISP-USBASP-STK500-Noir-Bleu-WT-/291862396761?hash=item43f45abf59:g:gXsAAOSwMgdXyGnh)
1. 6 pin header like this one: <img src="images/6pin_header.jpg" width="100" height="100" /> [(example Digi-Key link)](http://www.digikey.com/products/en?keywords=3M%20961206-6404-AR)
@ -28,7 +28,7 @@ The 6 Pin header needs to be solder on the board like indicated by the red recta
###Connect the programmer
1. Before you connect the programmer make sure that you have selected the 3.3V mode and not 5V. The RF Modules are not 5V tolerant and you will break them with 5V. On most programmers this is done by moving a jumper.
<img src="images/USBasp_Programmer_jumper.png" width="366" height="200" />
<img src="images/USBasp_Programmer_jumper.png" width="200" height="200" />
1. Please re-read item 1. above before going on.
1. Turn the rotary switch on the DIY Multiprotocol module to the 0 position. If you do not have a switch for Serial mode only then it is the same as being in the 0 position. The upload will not work if the switch is in any other position.
1. Connect the 6-pin programming connector to the 6-pin ASP IVR connector on the DIY Multiprotocol board. Be sure to match the ground pin of the programmer connector to the ground pin on the board.