From 91db02f2da762894262740ccadd09fc16c331bcd Mon Sep 17 00:00:00 2001 From: gerrievanzyl Date: Thu, 22 Sep 2016 22:39:31 +0200 Subject: [PATCH] Update Transmitters.md --- docs/Transmitters.md | 31 ++++++++++++++++++++----------- 1 file changed, 20 insertions(+), 11 deletions(-) diff --git a/docs/Transmitters.md b/docs/Transmitters.md index a89a48c..1859a16 100644 --- a/docs/Transmitters.md +++ b/docs/Transmitters.md @@ -35,20 +35,22 @@ Transmitters that run er9X, erSky9X or OpenTx firmwares - like the FrSky Taranis This serial protocol does not require any hardware modifications, but **will** require updating the firmware on your radio. +To enable serial telemetry **may** require modifications to your Tx. See the table below. + Transmitters and firmware combinations that support the Serial protocol are: -{Can someone check the transmitters click through to the right pages? How should the "erSky9x" boards be handled? A separate Tx- page or a link to the Taranis page?} -Transmitter|Firmware Options -:----------|:------- -[FrSky Taranis/Plus/9XE](Tx-Taranis.md)| [erSky9x](http://www.er9x.com), [OpenTx 2.1.8 Multi](http://plaisthos.de/opentx/) -[Turnigy 9X/9xR](Tx-FlyskyTH9X.md)|[er9x](http://www.er9x.com) -[Turnigy 9XR-Pro](Tx-Taranis.md)|[erSky9x](http://www.er9x.com) -[FrSky TH9x](Tx-FlyskyTH9X.md)|[er9x](http://www.er9x.com) -SKY board|[erSky9x](http://www.er9x.com) -AR9X board|[erSky9x](http://www.er9x.com) -9Xtreme board|[erSky9x](http://www.er9x.com) -AR9X UNI board|[erSky9x](http://www.er9x.com) + +Transmitter|Firmware Options|Telemetry Enabled +:----------|:---------------|:---------------- +[FrSky Taranis/Plus/9XE](Tx-Taranis.md)| [erSky9x](http://www.er9x.com), [OpenTx 2.1.8 Multi](http://plaisthos.de/opentx/)|Yes - native +[Turnigy 9X/9xR](Tx-FlyskyTH9X.md)|[er9x](http://www.er9x.com)|[Mod required](http://blog.oscarliang.net/turnigy-9x-advance-mod/), No DSM telem +[Turnigy 9XR-Pro](Tx-Taranis.md)|[erSky9x](http://www.er9x.com)|Yes - native +[FrSky TH9x](Tx-FlyskyTH9X.md)|[er9x](http://www.er9x.com) |[Mod required](http://blog.oscarliang.net/turnigy-9x-advance-mod/), No DSM telem +SKY board|[erSky9x](http://www.er9x.com)|Yes - native +AR9X board|[erSky9x](http://www.er9x.com)|Yes - native +9Xtreme board|[erSky9x](http://www.er9x.com)|Yes - native +AR9X UNI board|[erSky9x](http://www.er9x.com)|Yes - native Click on your transmitter above to view specific setup instructions. @@ -57,3 +59,10 @@ Other Notes: - Owners of Walkera Devo transmitters should look at the [Deviation-Tx](http://www.deviationtx.com) project for how to achieve the same end goal with your transmitters. +- To enable telemetry on a Turnigy 9X or 9XR you need to modify your TX following one of the Frsky mod like this [one](http://blog.oscarliang.net/turnigy-9x-advance-mod/). + +- DSM telemetry is not available on er9x due to a lack of flash space. + +- Enabling telemetry on a 9XR PRO and may be other TXs does not require any hardware modifications. The additional required serial pin is already available on the TX back module pins. + +- Once the TX is telemetry enabled, it just needs to be configured on the model (see er9x/ersky9x documentation).