gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-03-15 12:59:09 +00:00
Code Issues Projects Releases Wiki Activity

OrangeRX TX modifications

Browse Source
This commit is contained in:
Pascal Langer 2017-12-12 10:19:50 +01:00
parent f280779528
commit 8da03940e8
4 changed files with 9 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Multiprotocol/CYRF6936_SPI.ino
View File

@ -106,7 +106,7 @@ void CYRF_SetTxRxMode(uint8_t mode)
//Set the post tx/rx state //Set the post tx/rx state
CYRF_WriteRegister(CYRF_0F_XACT_CFG, mode == TX_EN ? 0x28 : 0x2C); // 4=IDLE, 8=TX, C=RX CYRF_WriteRegister(CYRF_0F_XACT_CFG, mode == TX_EN ? 0x28 : 0x2C); // 4=IDLE, 8=TX, C=RX
if(mode == TX_EN) if(mode == TX_EN)
#ifdef DSM_BLUE #ifdef ORANGE_TX_BLUE
CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x20); // XOUT=1, PACTL=0 CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x20); // XOUT=1, PACTL=0
else else
CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x80); // XOUT=0, PACTL=1 CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x80); // XOUT=0, PACTL=1

37
Multiprotocol/MultiOrange.h
View File

@ -1,16 +1,12 @@
#define ARDUINO_AVR_PRO 1 //#define ARDUINO_AVR_PRO 1
//#define __AVR_ATmega328P__ 1
#define ORANGE_TX 1 #define ORANGE_TX 1
// For BLUE module use:
//#define DSM_BLUE
#include <stdlib.h> #include <stdlib.h>
#include <string.h> #include <string.h>
#include <avr/interrupt.h> #include <avr/interrupt.h>
static void protocol_init(void) ; /*static void protocol_init(void) ;
static void update_channels_aux(void) ; static void update_channels_aux(void) ;
static uint32_t random_id(uint16_t adress, uint8_t create_new) ; static uint32_t random_id(uint16_t adress, uint8_t create_new) ;
static void update_serial_data(void) ; static void update_serial_data(void) ;
@ -57,7 +53,7 @@ extern uint16_t ReadDsm() ;
extern void setup() ; extern void setup() ;
extern void loop() ; extern void loop() ;
*/
#define yield() #define yield()
#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L ) #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
@ -141,30 +137,3 @@ void init()
PORTA.PIN6CTRL = 0x18 ; PORTA.PIN6CTRL = 0x18 ;
PORTA.PIN7CTRL = 0x18 ; PORTA.PIN7CTRL = 0x18 ;
} }
//#ifndef ARDUINO_AVR_XMEGA32D4
//#include "Multiprotocol.ino"
//#include "SPI.ino"
//#include "Common.ino"
//#include "Arduino.ino"
//#include "cyrf6936_SPI.ino"
//#include "DSM_cyrf6936.ino"
//#include "Devo_cyrf6936.ino"
//#include "J6Pro_cyrf6936.ino"
//#include "WK2x01_cyrf6936.ino"
//#include "Telemetry.ino"
//#endif
//int main(void)
//{
// init() ;
// setup() ;
// for(;;)
// {
// loop() ;
// }
//}

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1 #define VERSION_MAJOR 1
#define VERSION_MINOR 1 #define VERSION_MINOR 1
#define VERSION_REVISION 6 #define VERSION_REVISION 6
#define VERSION_PATCH_LEVEL 41 #define VERSION_PATCH_LEVEL 42
//****************** //******************
// Protocols // Protocols
//****************** //******************

4
Multiprotocol/_Config.h
View File

@ -90,6 +90,10 @@
// The offset is in +/-kHz. Default value is 0. // The offset is in +/-kHz. Default value is 0.
#define A7105_FREQ_OFFSET 0 #define A7105_FREQ_OFFSET 0
//If you compile for the OrangeRX TX module you need to select the correct board type.
//By default the compilation is done for the GREEN board, to switch to a BLUE board uncomment the line below by removing the "//"
//#define ORANGE_TX_BLUE
/*****************/ /*****************/
/*** GLOBAL ID ***/ /*** GLOBAL ID ***/
/*****************/ /*****************/