diff --git a/Multiprotocol/CYRF6936_SPI.ino b/Multiprotocol/CYRF6936_SPI.ino
index bbfe7ff..276e8bb 100644
--- a/Multiprotocol/CYRF6936_SPI.ino
+++ b/Multiprotocol/CYRF6936_SPI.ino
@@ -106,7 +106,7 @@ void CYRF_SetTxRxMode(uint8_t mode)
 		//Set the post tx/rx state
 		CYRF_WriteRegister(CYRF_0F_XACT_CFG, mode == TX_EN ? 0x28 : 0x2C); // 4=IDLE, 8=TX, C=RX
 		if(mode == TX_EN)
-#ifdef DSM_BLUE
+#ifdef ORANGE_TX_BLUE
 			CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x20); // XOUT=1, PACTL=0
 		else
 			CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x80);	// XOUT=0, PACTL=1
diff --git a/Multiprotocol/MultiOrange.h b/Multiprotocol/MultiOrange.h
index 6bda063..19015bf 100644
--- a/Multiprotocol/MultiOrange.h
+++ b/Multiprotocol/MultiOrange.h
@@ -1,16 +1,12 @@
-#define ARDUINO_AVR_PRO		1
-//#define __AVR_ATmega328P__	1
+//#define ARDUINO_AVR_PRO		1
 
 #define ORANGE_TX	1
 
-// For BLUE module use:
-//#define DSM_BLUE
-
 #include <stdlib.h>
 #include <string.h>
 #include <avr/interrupt.h>
 
-static void protocol_init(void) ;
+/*static void protocol_init(void) ;
 static void update_channels_aux(void) ;
 static uint32_t random_id(uint16_t adress, uint8_t create_new) ;
 static void update_serial_data(void) ;
@@ -57,7 +53,7 @@ extern uint16_t ReadDsm() ;
 
 extern void setup() ;
 extern void loop() ;
-
+*/
 #define yield()
 
 #define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )
@@ -141,30 +137,3 @@ void init()
 	PORTA.PIN6CTRL = 0x18 ;
 	PORTA.PIN7CTRL = 0x18 ;
 }
-
-//#ifndef ARDUINO_AVR_XMEGA32D4
-//#include "Multiprotocol.ino"
-//#include "SPI.ino"
-//#include "Common.ino"
-//#include "Arduino.ino"
-
-//#include "cyrf6936_SPI.ino"
-//#include "DSM_cyrf6936.ino"
-//#include "Devo_cyrf6936.ino"
-//#include "J6Pro_cyrf6936.ino"
-//#include "WK2x01_cyrf6936.ino"
-
-//#include "Telemetry.ino"
-//#endif
-
-
-//int main(void)
-//{
-//	init() ;
-//	setup() ;
-//	for(;;)
-//	{
-//		loop() ;
-//	}
-//}
-
diff --git a/Multiprotocol/Multiprotocol.h b/Multiprotocol/Multiprotocol.h
index 7bd7b46..c652f9b 100644
--- a/Multiprotocol/Multiprotocol.h
+++ b/Multiprotocol/Multiprotocol.h
@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		1
 #define VERSION_REVISION	6
-#define VERSION_PATCH_LEVEL	41
+#define VERSION_PATCH_LEVEL	42
 //******************
 // Protocols
 //******************
diff --git a/Multiprotocol/_Config.h b/Multiprotocol/_Config.h
index caf5c4e..8b4d9ef 100644
--- a/Multiprotocol/_Config.h
+++ b/Multiprotocol/_Config.h
@@ -90,6 +90,10 @@
 // The offset is in +/-kHz. Default value is 0.
 #define A7105_FREQ_OFFSET 0
 
+//If you compile for the OrangeRX TX module you need to select the correct board type.
+//By default the compilation is done for the GREEN board, to switch to a BLUE board uncomment the line below by removing the "//"
+//#define ORANGE_TX_BLUE
+
 /*****************/
 /*** GLOBAL ID ***/
 /*****************/