diff --git a/docs/Module_Build_yourself_PCB.md b/docs/Module_Build_yourself_PCB.md
index a09d575..ae47b34 100644
--- a/docs/Module_Build_yourself_PCB.md
+++ b/docs/Module_Build_yourself_PCB.md
@@ -37,7 +37,7 @@ The schematic for the board is [here](#STM32_Schematic)
 1. A module case that fits your receiver like the one [here](https://www.xtremepowersystems.net/proddetail.php?prod=XPS-J1CASE)  
  <img src="https://www.xtremepowersystems.net/prodimages/j1case.jpg" width="200" height="180" />  
   or you can 3D print your own from a selection on Thingiverse ([Example 1](http://www.thingiverse.com/thing:1852868) [Example 2](http://www.thingiverse.com/thing:1661833)).  
- <img src="http://thingiverse-production-new.s3.amazonaws.com/renders/55/1c/cb/0a/e4/5d2c2b06be7f3f6f8f0ab4638dd7c6fc_preview_featured.jpg" width="250" height="200" /> 
+ [<img src="http://thingiverse-production-new.s3.amazonaws.com/renders/55/1c/cb/0a/e4/5d2c2b06be7f3f6f8f0ab4638dd7c6fc_preview_featured.jpg" width="250" height="200" /> ](http://www.thingiverse.com/thing:1852868)
 1. A 2.4GHz antenna and pigtail
 1. AVR ISP programmer like the popular USBASP programming dongle that is 3.3V safe - available from many sellers on [ebay.](http://www.ebay.com/sch/i.html?_odkw=usbasp+progammer&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR3.TRC2.A0.H0.Xusbasp+progammer+3.3V.TRS1&_nkw=usbasp+progammer+3.3V&_sacat=0)  There are reports that some of the cheap programmers are not safe to use with 3.3V units (like this unit).  Look for USBAsp programmers with the “LC Technologies” label. {Pascal to confirm these reports are true} Also, you will need a 10-pin to 6-pin connector to connect the USBASP to the board.