From 855ca771941e84ebb45f57467e24e99c3fa459bd Mon Sep 17 00:00:00 2001 From: pascallanger Date: Wed, 3 Feb 2016 18:24:56 +0100 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index 3a53810..09e9958 100644 --- a/README.md +++ b/README.md @@ -532,7 +532,7 @@ This will make sure your ATMEGA328 is well configured and the global TX ID is no - Connect 1 to 4 of the selection protocol pins to GND. ####Input Mode - Serial -- Make sure you have done the mods to the v2.3c PCB by adding the 1k and 330 ohm resistors as indicated in the [Board section] (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#board). +- Make sure you have done the mods to the v2.3c PCB by adding the 2.2k and 330 ohm resistors as indicated in the [Board section] (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#board). - Leave all 4 selection pins unconnected. ###Bind