gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:38:10 +00:00
Code Issues Projects Releases Wiki Activity

Update README.md

Browse Source
This commit is contained in:
pascallanger 2016-02-03 18:24:56 +01:00
parent 4f23af070e
commit 855ca77194
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -532,7 +532,7 @@ This will make sure your ATMEGA328 is well configured and the global TX ID is no
- Connect 1 to 4 of the selection protocol pins to GND.
####Input Mode - Serial
- Make sure you have done the mods to the v2.3c PCB by adding the 1k and 330 ohm resistors as indicated in the [Board section] (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#board).
- Make sure you have done the mods to the v2.3c PCB by adding the 2.2k and 330 ohm resistors as indicated in the [Board section] (https://github.com/pascallanger/DIY-Multiprotocol-TX-Module#board).
- Leave all 4 selection pins unconnected.
###Bind