Add skeleton for AFHDS2A receiver protocol

Multiprotocol/AFHDS2A_Rx_a7105.ino

@@ -0,0 +1,30 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(AFHDS2A_RX_A7105_INO)
+
+#include "iface_a7105.h" 
+
+uint16_t initAFHDS2A_Rx()
+{
+	return 1000;
+}
+
+uint16_t AFHDS2A_Rx_callback()
+{
+	return 1000;
+}
+
+#endif

Multiprotocol/Multi.txt

@@ -53,4 +53,5 @@
 53,Flyzone,FZ-410
 54,Scanner
 55,FrskyX_RX,FCC,EU_LBT
+56,AFHDS2A_RX
 63,XN_DUMP,250K,1M,2M

Multiprotocol/Multiprotocol.h

@@ -82,6 +82,7 @@ enum PROTOCOLS
 	PROTO_FLYZONE	= 53,	// =>A7105
 	PROTO_SCANNER	= 54,	// =>CC2500
 	PROTO_FRSKYX_RX	= 55,	// =>CC2500
+	PROTO_AFHDS2A_RX= 56,	// =>A7105
 	PROTO_XN297DUMP	= 63,	// =>NRF24L01
 };
 
@@ -575,7 +576,8 @@ enum {
 #define AFHDS2A_EEPROM_OFFSET	50		// RX ID, 4 bytes per model id, end is 50+64=114
 #define BUGS_EEPROM_OFFSET		114		// RX ID, 2 bytes per model id, end is 114+32=146
 #define BUGSMINI_EEPROM_OFFSET	146		// RX ID, 2 bytes per model id, end is 146+32=178
-#define FRSKYX_RX_EEPROM_OFFSET	178		// (3) TX ID + (1) freq_tune + (47) channels, 51 bytes per model, end is 178+51=229
+#define FRSKYX_RX_EEPROM_OFFSET	178		// (3) TX ID + (1) freq_tune + (47) channels, 51 bytes, end is 178+51=229
+#define AFHDS2A_RX_EEPROM_OFFSET 229	// (4) TX ID + (16) channels, 20 bytes, end is 229+20=249
 //#define CONFIG_EEPROM_OFFSET 	210		// Current configuration of the multimodule
 
 //****************************************

Multiprotocol/Multiprotocol.ino

@@ -1003,6 +1003,13 @@ static void protocol_init()
 						remote_callback = ReadFlyzone;
 						break;
 				#endif
+				#if defined(AFHDS2A_RX_A7105_INO)
+					case PROTO_AFHDS2A_RX:
+						PE1_off;	//antenna RF1
+						next_callback = initAFHDS2A_Rx();
+						remote_callback = AFHDS2A_Rx_callback;
+						break;
+				#endif
 			#endif
 			#ifdef CC2500_INSTALLED
 				#if defined(FRSKYD_CC2500_INO)

Multiprotocol/Validate.h

@@ -174,6 +174,7 @@
 	#undef AFHDS2A_A7105_INO
 	#undef BUGS_A7105_INO
 	#undef FLYZONE_A7105_INO
+	#undef AFHDS2A_RX_A7105_INO
 #endif
 #ifndef CYRF6936_INSTALLED
 	#undef	DEVO_CYRF6936_INO
@@ -254,6 +255,8 @@
 	#undef SCANNER_CC2500_INO
 	#undef FRSKYX_RX_TELEMETRY
 	#undef FRSKYX_RX_CC2500_INO
+	#undef AFHDS2A_RX_TELEMETRY
+	#undef AFHDS2A_RX_A7105_INO
 #else
 	#if defined(MULTI_TELEMETRY) && defined(MULTI_STATUS)
 		#error You should choose either MULTI_TELEMETRY or MULTI_STATUS but not both.
@@ -266,6 +269,10 @@
 		#undef FRSKYX_RX_TELEMETRY
 		#undef FRSKYX_RX_CC2500_INO
 	#endif
+	#if not defined(AFHDS2A_RX_A7105_INO) || not defined(AFHDS2A_RX_TELEMETRY)
+		#undef AFHDS2A_RX_TELEMETRY
+		#undef AFHDS2A_RX_A7105_INO
+	#endif
 	#if not defined(BAYANG_NRF24L01_INO)
 		#undef BAYANG_HUB_TELEMETRY
 	#endif

Multiprotocol/_Config.h

@@ -157,6 +157,7 @@
 
 //The protocols below need an A7105 to be installed
 #define	AFHDS2A_A7105_INO
+#define AFHDS2A_RX_A7105_INO
 #define	BUGS_A7105_INO
 #define	FLYSKY_A7105_INO
 #define	FLYZONE_A7105_INO
@@ -286,6 +287,7 @@
 #define HITEC_FW_TELEMETRY			// Under development: Forward received telemetry packets to be decoded by ersky9x and OpenTX
 #define SCANNER_TELEMETRY			// Forward spectrum scanner data to TX
 #define FRSKYX_RX_TELEMETRY			// Forward channels data to TX
+#define AFHDS2A_RX_TELEMETRY		// Forward channels data to TX
 
 //SPORT_POLLING is an implementation of the same polling routine as XJT module for sport telemetry bidirectional communication.
 //This is useful for passing sport control frames from TX to RX(ex: changing Betaflight PID or VTX channels on the fly using LUA scripts with OpentX).
@@ -476,6 +478,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		PPM_IBUS
 		PWM_SBUS
 		PPM_SBUS
+	PROTO_AFHDS2A_RX
+		NONE
 	PROTO_ASSAN
 		NONE
 	PROTO_BAYANG