gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-22 09:23:15 +00:00
Code Issues Projects Releases Wiki Activity

Disable low power by default

Browse Source
This commit is contained in:
pascallanger
2017-02-23 11:23:25 +01:00
parent 2ba3552578
commit 846e09c7cb
5 changed files with 31 additions and 8 deletions
Download Patch File Download Diff File Expand all files Collapse all files

15
Multiprotocol/_Config.h
View File

@@ -50,9 +50,9 @@
#define WAIT_FOR_BIND
/**************************/
/*** RF CHIPS INSTALLED ***/
/**************************/
/****************/
/*** RF CHIPS ***/
/****************/
//There are 4 RF components supported. If one of them is not installed you must comment it using "//".
//If a chip is not installed all associated protocols are disabled.
//4-in-1 modules have all RF chips installed
@@ -62,6 +62,14 @@
#define CC2500_INSTALLED
#define NRF24L01_INSTALLED
//Low power is reducing the transmit power of the multi module. This setting is configurable per model in PPM (table below) or Serial mode (radio GUI).
//It can be activated when flying indoor or small models since the distance is short or if a model is causing issues when flying closed to the TX.
//By default low power is completly disabled on all rf chips to prevent mistakes, but you can enable it by uncommenting the lines below:
//#define A7105_ENABLE_LOW_POWER
//#define CYRF6936_ENABLE_LOW_POWER
//#define CC2500_ENABLE_LOW_POWER
//#define NRF24L01_ENABLE_LOW_POWER
/****************************/
/*** PROTOCOLS TO INCLUDE ***/
@@ -70,7 +78,6 @@
//All the protocols will not fit in the Atmega328p module so you need to pick and choose.
//Comment the protocols you are not using with "//" to save Flash space.
//The protocols below need an A7105 to be installed
#define FLYSKY_A7105_INO
#define HUBSAN_A7105_INO