Doc updates for OrangeRX module (#123)

BootLoaders/README.md

@@ -1,5 +1,5 @@
 # Arduino IDE board definitions for Multi 4-in-1
-Board definitions are available for both the Atmega328p and STM32F103C boards.  The board definitions make it easier to compile and install the multiprotocol module firmware.
+Board definitions are available for the Atmega328p, STM32, and OrangeRX modules.  The board definitions make it easier to compile and install the multiprotocol module firmware.
 
 ## Installing
 The board definitions are installed using the Arduino IDE Boards Manager.
@@ -32,13 +32,15 @@ The board definitions are installed using the Arduino IDE Boards Manager.
 ## Verify the boards are installed
 1. Click **Tools -> Board**
 2. Scroll down the list to the **Multi 4-in-1** board headings verify that the boards you installed are available:
-  * **Multi 4-in-1 (Atmega328p, 3.3V, 16MHz)** for the Atmega board
-  * **Multi 4-in-1 (STM32F103CB)** for the STM32 board
-  
-    ![Image of Yaktocat](/docs/images/boards-menu.jpg)
+    ![Image](/docs/images/boards-menu.jpg)
+    
+    * **Multi 4-in-1 (Atmega328p, 3.3V, 16MHz)** for the Atmega module
+    * **Multi 4-in-1 (STM32F103CB)** for the STM32 module
+    * **Multi 4-in-1 (OrangeRX)** for the OrangeRX module
 
 ## Compiling and Uploading
 Refer to the hardware-specific pages for information on compiling the firmware and uploading it to the multiprotocol module:
 
 * [Compiling for Atmega](/docs/Compiling.md)
 * [Compiling for STM32](/docs/Compiling_STM32.md)
+* [Compiling for OrangeRX](/docs/Compiling_OrangeTx.md)

README.md

@@ -23,15 +23,15 @@ If you like this project and want to support further development please consider
 * [Available Protocols list](Protocols_Details.md)
 * [The old documentation](docs/README-old.md)
 
-
 ## Outline of the documentation
 1. Introduction (this page)
 1. [Available protocols](Protocols_Details.md)
 1. [Transmitters and serial/telemetry options](docs/Transmitters.md)
 1. [Module Hardware options](docs/Hardware.md)
 1. Compiling and programming the module
-    * [4in1/DIY Multiprotocol module based on ATmega328](docs/Compiling.md)
-    * [DIY Multiprotocol module based on STM32](docs/Compiling_STM32.md)
+    * [Atmega328p Multiprotocol Module](docs/Compiling.md)
+    * [STM32 Multiprotocol Module](docs/Compiling_STM32.md)
+    * [OrangeRX Module](docs/Compiling_OrangeTx.md)
 1. [Transmitter Setup](docs/Transmitters.md) 
 1. [How to for popular models](docs/Models.md)
 1. [Troubleshooting](docs/Troubleshooting.md)