gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-10 13:38:12 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling.md

Browse Source
This commit is contained in:
pascallanger 2017-01-24 08:40:09 +01:00 committed by GitHub
parent c104e8e1f0
commit 7e6badaf5d
1 changed files with 1 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Compiling.md
View File

@ -80,9 +80,7 @@ If there is another error carefully read it, go to the line number indicated and
1. You are now ready to flash the firmware. In the Arduino IDE click **Sketch -> Upload Using Programmer**. 1. You are now ready to flash the firmware. In the Arduino IDE click **Sketch -> Upload Using Programmer**.
If the output indicates that the firmware has been uploaded successfully - give yourself a pat on the back. Well done, you have successfully programmed your DIY Multiprotocol module and you are ready to go on to the final step [Setting up your Transmitter](TransmitterSetup.md) before you can begin to fly!!!! If the output indicates that the firmware has been uploaded successfully - give yourself a pat on the back. Well done, you have successfully programmed your DIY Multiprotocol module. You can already go to the final step [Setting up your Transmitter](TransmitterSetup.md) and begin to fly!!!! But don't forget to visit the next Advanced section which has some extra steps needed to use your module at his full potential.
But don't forget to visit the Advanced section as some extra steps are needed to use your module at his full potential.
**Troubleshooting** **Troubleshooting**