gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 16:28:10 +00:00
Code Issues Projects Releases Wiki Activity

Update PPM_Setup.md

Browse Source
This commit is contained in:
pascallanger 2018-02-11 14:40:07 +01:00 committed by GitHub
parent cdbaeb1c6c
commit 7d04005c72
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/PPM_Setup.md
View File

@ -32,19 +32,19 @@ The protocol selection is based on 2 parameters:
- to go to the next bank, short press the bind button, this action is confirmed by the LED staying on for 1.5 sec
Here is the full protocol selection procedure:
* turn the dial to 15
* turn the selection switch to 15
* power up the module
* the module displays the current bank by flashing the LED x number of times, x being between 1 and up to 5
* a short press on the bind button turns the LED on for 1 sec indicating that the system has changed the bank
* repeat operation 3 and 4 until you have reached the bank you want
* power off
* change the dial to the desired position
* change the selection switch to the desired position (1..14)
* power on
* enjoy
Notes:
* **The protocol selection must be done before the module is turned on**
* The protocol mapping based on bank+rotary switch position can be seen/modified at the end of the file [_Config.h](/Multiprotocol/_Config.h)**
* The protocol mapping based on bank + selection switch position can be seen/modified at the end of the file [_Config.h](/Multiprotocol/_Config.h)**
## Binding in PPM mode