gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-11-03 22:31:04 +00:00
Code Issues Projects Releases Wiki Activity

SLT Fix?

Browse Source
This commit is contained in:
pascallanger 2016-11-16 21:17:03 +00:00 committed by GitHub
parent 6ad9fb8f27
commit 7c22110c96
1 changed files with 193 additions and 202 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

63
Multiprotocol/SLT_nrf24l01.ino
View File

@ -12,7 +12,7 @@
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
// Last sync with hexfet new_protocols/slt_nrf24l01.c dated 2015-02-13
// Last sync with deviation main github branch
#if defined(SLT_NRF24L01_INO)
@ -24,8 +24,7 @@
#define SLT_TXID_SIZE 4
enum {
SLT_INIT2 = 0,
SLT_BIND,
SLT_BIND=0,
SLT_DATA1,
SLT_DATA2,
SLT_DATA3
@ -45,24 +44,18 @@ static void __attribute__((unused)) SLT_init()
NRF24L01_SetPower();
NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t*)"\xC3\xC3\xAA\x55", 4);
NRF24L01_FlushRx();
}
static void __attribute__((unused)) SLT_init2()
{
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, SLT_TXID_SIZE);
NRF24L01_FlushTx();
packet_sent = 0;
hopping_frequency_no = 0;
// Turn radio power on
NRF24L01_SetTxRxMode(TX_EN);
}
static void __attribute__((unused)) SLT_set_tx_id(void)
static void __attribute__((unused)) SLT_set_freq(void)
{
// Frequency hopping sequence generation
for (uint8_t i = 0; i < 4; ++i)
for (uint8_t i = 0; i < SLT_TXID_SIZE; ++i)
{
uint8_t next_i = (i+1) % 4; // is & 3 better than % 4 ?
uint8_t next_i = (i+1) % SLT_TXID_SIZE; // is & 3 better than % 4 ?
uint8_t base = i < 2 ? 0x03 : 0x10;
hopping_frequency[i*4 + 0] = (rx_tx_addr[i] & 0x3f) + base;
hopping_frequency[i*4 + 1] = (rx_tx_addr[i] >> 2) + base;
@ -72,8 +65,9 @@ static void __attribute__((unused)) SLT_set_tx_id(void)
}
// unique
uint8_t done = 0;
for (uint8_t i = 0; i < SLT_NFREQCHANNELS; ++i)
{
uint8_t done = 0;
while (!done)
{
done = 1;
@ -86,8 +80,7 @@ static void __attribute__((unused)) SLT_set_tx_id(void)
hopping_frequency[i] = hopping_frequency[i] - 0x50 + 0x03;
}
}
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 4);
}
}
static void __attribute__((unused)) SLT_wait_radio()
@ -111,7 +104,8 @@ static void __attribute__((unused)) SLT_build_packet()
{
// aileron, elevator, throttle, rudder, gear, pitch
uint8_t e = 0; // byte where extension 2 bits for every 10-bit channel are packed
for (uint8_t i = 0; i < 4; ++i) {
for (uint8_t i = 0; i < 4; ++i)
{
uint16_t v = convert_channel_10b(CH_AETR[i]);
packet[i] = v;
e = (e >> 2) | (uint8_t) ((v >> 2) & 0xC0);
@ -131,19 +125,19 @@ static void __attribute__((unused)) SLT_build_packet()
static void __attribute__((unused)) SLT_send_bind_packet()
{
SLT_wait_radio();
BIND_IN_PROGRESS; // autobind protocol
BIND_IN_PROGRESS; //Limit TX power to bind level
NRF24L01_SetPower();
BIND_DONE;
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, (uint8_t *)"\x7E\xB8\x63\xA9", 4);
NRF24L01_WriteReg(NRF24L01_05_RF_CH, 0x50);
SLT_send_data(rx_tx_addr, 4);
SLT_send_data(rx_tx_addr, SLT_TXID_SIZE);
// NB: we should wait until the packet's sent before changing TX address!
// W²ait until the packet's sent before changing TX address!
SLT_wait_radio();
BIND_DONE;
NRF24L01_SetPower();
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 4);
NRF24L01_SetPower(); //Change power back to normal level
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, SLT_TXID_SIZE);
}
uint16_t SLT_callback()
@ -151,11 +145,6 @@ uint16_t SLT_callback()
uint16_t delay_us = 20000; // 3 packets with 1ms intervals every 22ms
switch (phase)
{
case SLT_INIT2:
SLT_init2();
phase = SLT_BIND;
delay_us = 150;
break;
case SLT_BIND:
SLT_send_bind_packet();
phase = SLT_DATA1;
@ -163,20 +152,20 @@ uint16_t SLT_callback()
break;
case SLT_DATA1:
SLT_build_packet();
SLT_send_data(packet, 7);
SLT_send_data(packet, SLT_PAYLOADSIZE);
phase = SLT_DATA2;
delay_us = 1000;
break;
case SLT_DATA2:
SLT_send_data(packet, 7);
SLT_send_data(packet, SLT_PAYLOADSIZE);
phase = SLT_DATA3;
delay_us = 1000;
break;
case SLT_DATA3:
SLT_send_data(packet, 7);
if (++counter >= 100)
SLT_send_data(packet, SLT_PAYLOADSIZE);
if (++packet_count >= 100)
{
counter = 0;
packet_count = 0;
phase = SLT_BIND;
delay_us = 1000;
}
@ -192,10 +181,12 @@ uint16_t SLT_callback()
uint16_t initSLT()
{
counter = 0;
packet_count = 0;
packet_sent = 0;
hopping_frequency_no = 0;
SLT_set_freq();
SLT_init();
phase = SLT_INIT2;
SLT_set_tx_id();
phase = SLT_BIND;
return 50000;
}