gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-11 17:27:52 +00:00
Code Issues Projects Releases Wiki Activity

teste flysky afhds2a STM2

Browse Source
This commit is contained in:
tipouic 2016-10-19 21:07:30 +02:00
parent 950ee9ddc2
commit 7c17fec35f
30 changed files with 2744 additions and 1398 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
.gitignore vendored
View File

@ -1 +1,4 @@
*.ffs_db
*.ffs_db
*.ffs_db
*.ffs_db
*.hc

85
Multiprotocol/A7105_SPI.ino
View File

@ -15,6 +15,7 @@
/********************/
/** A7105 routines **/
/********************/
#ifdef A7105_INSTALLED
#include "iface_a7105.h"
void A7105_WriteData(uint8_t len, uint8_t channel)
@ -36,7 +37,7 @@ void A7105_ReadData(uint8_t len=16) {
A7105_CSN_off;
SPI_Write(0x45);
for (i=0;i<len;i++)
packet[i]=SPI_SDIO_Read();
packet[i]=SPI_SDI_Read();
A7105_CSN_on;
}
@ -48,11 +49,12 @@ void A7105_WriteReg(uint8_t address, uint8_t data) {
A7105_CSN_on;
}
uint8_t A7105_ReadReg(uint8_t address) {
uint8_t A7105_ReadReg(uint8_t address)
{
uint8_t result;
A7105_CSN_off;
SPI_Write(address |=0x40); //bit 6 =1 for reading
result = SPI_SDIO_Read();
result = SPI_SDI_Read();
A7105_CSN_on;
return(result);
}
@ -165,36 +167,58 @@ const uint8_t PROGMEM AFHDS2A_regs[] = {
0x1e, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x3b, 0x00, 0x17, 0x47, 0x80, 0x03, 0x01, 0x45, 0x18, 0x00, // 20 - 2f
0x01, 0x0f // 30 - 31
};
static const uint8_t PROGMEM JOYSWAY_regs[] = {
0x00, 0x62, -1, 0x0f, 0x00, -1 , -1 , 0x00, 0x00, 0x05, 0x00, 0x01, 0x00, 0xf5, 0x00, 0x15,
0x9e, 0x4b, 0x00, 0x03, 0x56, 0x2b, 0x12, 0x4a, 0x02, 0x80, 0x80, 0x00, 0x0e, 0x91, 0x03, 0x0f,
0x16, 0x2a, 0x00, -1, -1, -1, 0x3a, 0x06, 0x1f, 0x47, 0x80, 0x01, 0x05, 0x45, 0x18, 0x00,
0x01, 0x0f, 0x00
};
#define ID_NORMAL 0x55201041
#define ID_PLUS 0xAA201041
void A7105_Init(uint8_t protocol)
{
void *A7105_Regs;
uint8_t *A7105_Regs;
if(protocol==INIT_FLYSKY || protocol==INIT_FLYSKY_AFHDS2A)
{
A7105_WriteID(0x5475c52A);//0x2Ac57554
if(protocol==INIT_FLYSKY_AFHDS2A)
A7105_Regs=(void *)AFHDS2A_regs;
A7105_Regs=(uint8_t*)AFHDS2A_regs;
else
A7105_Regs=(void *)FLYSKY_A7105_regs;
A7105_Regs=(uint8_t*)FLYSKY_A7105_regs;
}
else if(protocol==INIT_JOYSWAY)
{
A7105_WriteID(0x5475c52a);//0x2Ac57554
A7105_Regs=(uint8_t*)JOYSWAY_regs;
}
else
{
{ // HUBSAN
A7105_WriteID(ID_NORMAL);
A7105_Regs=(void *)HUBSAN_A7105_regs;
A7105_Regs=(uint8_t*)HUBSAN_A7105_regs;
}
for (uint8_t i = 0; i < 0x33; i++){
if( pgm_read_byte_near((uint16_t)(A7105_Regs)+i != 0xFF)
A7105_WriteReg(i, pgm_read_byte_near((uint16_t)(A7105_Regs)+i));
if( pgm_read_byte_near(&A7105_Regs[i]) != 0xFF)
A7105_WriteReg(i, pgm_read_byte_near(&A7105_Regs[i]));
}
A7105_Strobe(A7105_STANDBY);
if(protocol==INIT_JOYSWAY)
A7105_Strobe(A7105_PLL);
else
A7105_Strobe(A7105_STANDBY);
//IF Filter Bank Calibration
A7105_WriteReg(A7105_02_CALC,1);
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
// A7105_ReadReg(A7105_22_IF_CALIB_I);
// A7105_ReadReg(A7105_24_VCO_CURCAL);
if(protocol==INIT_JOYSWAY) {
A7105_Strobe(A7105_STANDBY);
//VCO Current Calibration
A7105_WriteReg(A7105_24_VCO_CURCAL,0x13); //Recommended calibration from A7105 Datasheet
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x09); //Recommended calibration from A7105 Datasheet
A7105_WriteID(binding_idx);
}
if(protocol==INIT_FLYSKY || protocol==INIT_FLYSKY_AFHDS2A)
{
@ -205,25 +229,40 @@ void A7105_Init(uint8_t protocol)
}
//VCO Bank Calibrate channel 0
A7105_WriteReg(A7105_0F_CHANNEL, 0);
A7105_WriteReg(A7105_02_CALC,2);
if(protocol==INIT_JOYSWAY) {
A7105_Strobe(A7105_PLL);
A7105_WriteReg(A7105_02_CALC,1);
}
else {
A7105_WriteReg(A7105_0F_CHANNEL, 0);
A7105_WriteReg(A7105_02_CALC,2);
}
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
// A7105_ReadReg(A7105_25_VCO_SBCAL_I);
//VCO Bank Calibrate channel A0
A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
A7105_WriteReg(A7105_02_CALC, 2);
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
// A7105_ReadReg(A7105_25_VCO_SBCAL_I);
if(protocol==INIT_JOYSWAY) {
A7105_Strobe(A7105_STANDBY);
//VCO Current Calibration
A7105_WriteReg(A7105_24_VCO_CURCAL,0x13); //Recommended calibration from A7105 Datasheet
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x09); //Recommended calibration from A7105 Datasheet
}
else {
//VCO Bank Calibrate channel A0
A7105_WriteReg(A7105_0F_CHANNEL, 0xa0);
A7105_WriteReg(A7105_02_CALC, 2);
while(A7105_ReadReg(A7105_02_CALC)); // Wait for calibration to end
// A7105_ReadReg(A7105_25_VCO_SBCAL_I);
//Reset VCO Band calibration
if(protocol==INIT_FLYSKY)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x08);
if(protocol==INIT_FLYSKY_AFHDS2A)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x0A);
//Reset VCO Band calibration
if(protocol==INIT_FLYSKY)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x08);
if(protocol==INIT_FLYSKY_AFHDS2A)
A7105_WriteReg(A7105_25_VCO_SBCAL_I,0x0A);
}
A7105_SetTxRxMode(TX_EN);
A7105_SetPower();
A7105_Strobe(A7105_STANDBY);
}
#endif

109
Multiprotocol/A7105_joysway.ino
View File

@ -19,78 +19,6 @@
#define EVEN_ODD 0x00
//#define EVEN_ODD 0x01
static const uint8_t A7105_regs[] = {
0x00, 0x62, -1, 0x0f, 0x00, -1 , -1 , 0x00, 0x00, 0x05, 0x00, 0x01, 0x00, 0xf5, 0x00, 0x15,
0x9e, 0x4b, 0x00, 0x03, 0x56, 0x2b, 0x12, 0x4a, 0x02, 0x80, 0x80, 0x00, 0x0e, 0x91, 0x03, 0x0f,
0x16, 0x2a, 0x00, -1, -1, -1, 0x3a, 0x06, 0x1f, 0x47, 0x80, 0x01, 0x05, 0x45, 0x18, 0x00,
0x01, 0x0f, 0x00
};
static uint8_t next_ch;
static int joysway_init()
{
int i;
uint8_t if_calibration1;
//uint8_t vco_calibration0;
//uint8_t vco_calibration1;
phase = 0;
next_ch = 0x30;
for (i = 0; i < 0x33; i++)
if((uint8_t)A7105_regs[i] != -1)
A7105_WriteReg(i, A7105_regs[i]);
A7105_WriteID(0x5475c52a);
A7105_Strobe(A7105_PLL);
//IF Filter Bank Calibration
A7105_WriteReg(0x02, 1);
A7105_ReadReg(0x02);
uint32_t ms = micros();
while(micros() - ms < 500) {
if(! A7105_ReadReg(0x02))
break;
}
if (micros() - ms >= 500)
return 0;
A7105_Strobe(A7105_STANDBY);
if_calibration1 = A7105_ReadReg(0x22);
if(if_calibration1 & A7105_MASK_FBCF) {
//Calibration failed...what do we do?
return 0;
}
//VCO Current Calibration
A7105_WriteReg(0x24, 0x13); //Recomended calibration from A7105 Datasheet
A7105_WriteReg(0x25, 0x09); //Recomended calibration from A7105 Datasheet
A7105_WriteID(MProtocol_id_master);
A7105_Strobe(A7105_PLL);
A7105_WriteReg(0x02, 1);
ms = micros();
while(micros() - ms < 500) {
if(! A7105_ReadReg(0x02))
break;
}
if (micros() - ms >= 500)
return 0;
A7105_Strobe(A7105_STANDBY);
if_calibration1 = A7105_ReadReg(0x22);
if(if_calibration1 & A7105_MASK_FBCF) {
//Calibration failed...what do we do?
return 0;
}
A7105_WriteReg(0x24, 0x13); //Recomended calibration from A7105 Datasheet
A7105_WriteReg(0x25, 0x09); //Recomended calibration from A7105 Datasheet
A7105_SetTxRxMode(TX_EN);
A7105_SetPower();
A7105_Strobe(A7105_STANDBY);
return 1;
}
static void joysway_build_packet()
{
@ -101,16 +29,15 @@ static void joysway_build_packet()
//Center = 0x5d9
//1 % = 5
packet[0] = phase == 0 ? 0xdd : 0xff;
packet[1] = (MProtocol_id_master >> 24) & 0xff;
packet[2] = (MProtocol_id_master >> 16) & 0xff;
packet[3] = (MProtocol_id_master >> 8) & 0xff;
packet[4] = (MProtocol_id_master >> 0) & 0xff;
packet[1] = (binding_idx >> 24) & 0xff;
packet[2] = (binding_idx >> 16) & 0xff;
packet[3] = (binding_idx >> 8) & 0xff;
packet[4] = (binding_idx >> 0) & 0xff;
packet[5] = 0x00;
static const int chmap[4] = {6, 7, 10, 11};
for (i = 0; i < 4; i++) {
// if (i >= Model.num_channels) { packet[chmap[i]] = 0x64; continue; }
uint32_t value = map(limit_channel_100(i),servo_min_100,servo_max_100,0,204);
packet[chmap[i]] = value;
packet[chmap[i]] = map(limit_channel_100(i),servo_min_100,servo_max_100,0,204);
}
packet[8] = 0x64;
packet[9] = 0x64;
@ -124,39 +51,35 @@ static void joysway_build_packet()
static uint16_t joysway_cb()
{
uint8_t ch;
if (phase == 254) {
phase = 0;
A7105_WriteID(0x5475c52a);
ch = 0x0a;
hopping_frequency_no = 0x0a;
} else if (phase == 2) {
A7105_WriteID(MProtocol_id_master);
ch = 0x30;
A7105_WriteID(binding_idx);
hopping_frequency_no = 0x30;
} else {
if ((phase & 0x01) ^ EVEN_ODD) {
ch = 0x30;
hopping_frequency_no = 0x30;
} else {
ch = next_ch;
hopping_frequency_no = rf_ch_num;
}
}
if (! ((phase & 0x01) ^ EVEN_ODD)) {
next_ch++;
if (next_ch == 0x45)
next_ch = 0x30;
rf_ch_num++;
if (rf_ch_num == 0x45)
rf_ch_num = 0x30;
}
joysway_build_packet();
A7105_Strobe(A7105_STANDBY);
A7105_WriteData(16, ch);
A7105_WriteData(16, hopping_frequency_no);
phase++;
return 6000;
}
static uint16_t JOYSWAY_Setup() {
while(1) {
A7105_Reset();
if (joysway_init())
break;
}
binding_idx = MProtocol_id_master | 0xf8000000;
A7105_Init(INIT_JOYSWAY);
return 2400;
}
#endif

21
Multiprotocol/Arduino.ino
View File

@ -12,9 +12,23 @@
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef STM32_BOARD
/************************************/
/************************************/
/** Arduino replacement routines **/
/************************************/
// replacement map()
int16_t map( int16_t x, int16_t in_min, int16_t in_max, int16_t out_min, int16_t out_max)
{
// return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
long y ;
x -= in_min ;
y = out_max - out_min ;
y *= x ;
x = y / (in_max - in_min) ;
return x + out_min ;
}
// replacement millis() and micros()
// These work polled, no interrupts
// micros() MUST be called at least once every 32 milliseconds
@ -106,7 +120,7 @@ void delayMicroseconds(unsigned int us)
return;
us <<= 2; // * 4
us -= 2; // - 2
#ifdef XMEGA
#ifdef ORANGE_TX
__asm__ __volatile__ (
"1: sbiw %0,1" "\n\t" // 2 cycles
"nop \n"
@ -123,11 +137,12 @@ void delayMicroseconds(unsigned int us)
#endif
}
#ifndef XMEGA
#ifndef ORANGE_TX
void init()
{
// this needs to be called before setup() or some functions won't work there
sei();
}
#endif //XMEGA
#endif //ORANGE_TX
#endif //STM32_BOARD

4
Multiprotocol/CC2500_SPI.ino
View File

@ -1,3 +1,4 @@
/*
This project is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -17,6 +18,7 @@
//CC2500 SPI routines
//-------------------------------
//-------------------------------
#ifdef CC2500_INSTALLED
#include "iface_cc2500.h"
//----------------------------
@ -152,4 +154,4 @@ void CC2500_SetPower()
prev_power=power;
}
}
#endif

29
Multiprotocol/CG023_nrf24l01.ino
View File

@ -56,18 +56,23 @@ enum YD829_FLAGS {
};
enum H8_3D_FLAGS {
// flags going to packet[17]
H8_3D_FLAG_FLIP = 0x01,
H8_3D_FLAG_RATE_MID = 0x02,
H8_3D_FLAG_RATE_HIGH = 0x04,
H8_3D_FLAG_LIGTH = 0x08, // Light on H22
H8_3D_FLAG_HEADLESS = 0x10, // RTH + headless on H8, headless on JJRC H20, RTH on H22
H8_3D_FLAG_RTH = 0x20, // 360 flip mode on H8 3D and H22, RTH on JJRC H20
// flags going to packet[17]
H8_3D_FLAG_FLIP = 0x01,
H8_3D_FLAG_RATE_MID = 0x02,
H8_3D_FLAG_RATE_HIGH = 0x04,
H8_3D_FLAG_LIGTH = 0x08, // Light on H22
H8_3D_FLAG_HEADLESS = 0x10, // RTH + headless on H8, headless on JJRC H20, RTH on H22
H8_3D_FLAG_RTH = 0x20, // 360 flip mode on H8 3D and H22, RTH on JJRC H20
};
enum H8_3D_FLAGS_2 {
// flags going to packet[18]
H8_3D_FLAG_CALIBRATE = 0x20, // accelerometer calibration
// flags going to packet[18]
H8_3D_FLAG_CAM_UP = 0x04,
H8_3D_FLAG_CAM_DOWN = 0x08,
H8_3D_FLAG_CALIBRATE2 = 0x10, // acc calib. (H11D, H20)
H8_3D_FLAG_CALIBRATE = 0x20, // acc calib. (H8 3D), headless calib (H20)
H8_3D_FLAG_SNAPSHOT = 0x40,
H8_3D_FLAG_VIDEO = 0x80,
};
static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
@ -119,8 +124,10 @@ static void __attribute__((unused)) CG023_send_packet(uint8_t bind)
| GET_FLAG(Servo_AUX2,H8_3D_FLAG_LIGTH) //H22 light
| GET_FLAG(Servo_AUX3,H8_3D_FLAG_HEADLESS)
| GET_FLAG(Servo_AUX4,H8_3D_FLAG_RTH); // 180/360 flip mode on H8 3D
if(Servo_AUX5)
packet[18] = H8_3D_FLAG_CALIBRATE;
packet[18] = GET_FLAG(Servo_AUX5,H8_3D_FLAG_CALIBRATE)
| GET_FLAG(Servo_AUX5,H8_3D_FLAG_CALIBRATE2)
| GET_FLAG(Servo_AUX6, H8_3D_FLAG_SNAPSHOT)
| GET_FLAG(Servo_AUX7, H8_3D_FLAG_VIDEO);
}
uint8_t sum = packet[9];
for (uint8_t i=10; i < H8_3D_PACKET_SIZE-1; i++)

24
Multiprotocol/CYRF6936_SPI.ino
View File

@ -12,9 +12,9 @@
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef CYRF6936_INSTALLED
#include "iface_cyrf6936.h"
void CYRF_WriteRegister(uint8_t address, uint8_t data)
{
CYRF_CSN_off;
@ -182,11 +182,6 @@ void CYRF_WritePreamble(uint32_t preamble)
/*
*
*/
static void CYRF_StartReceive()
{
CYRF_WriteRegister(CYRF_05_RX_CTRL,0x87);
}
/*static void CYRF_ReadDataPacket(uint8_t dpbuffer[])
{
CYRF_ReadRegisterMulti(CYRF_21_RX_BUFFER, dpbuffer, 0x10);
@ -243,10 +238,14 @@ void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uin
for(i = 0; i < NUM_FREQ; i++)
{
CYRF_ConfigRFChannel(i);
CYRF_ReadRegister(CYRF_13_RSSI);
CYRF_StartReceive();
delayMicroseconds(10);
rssi[i] = CYRF_ReadRegister(CYRF_13_RSSI);
delayMicroseconds(270); //slow channel require 270usec for synthesizer to settle
if( !(CYRF_ReadRegister(CYRF_05_RX_CTRL) & 0x80)) {
CYRF_WriteRegister(CYRF_05_RX_CTRL, 0x80); //Prepare to receive
delayMicroseconds(15);
CYRF_ReadRegister(CYRF_13_RSSI); //dummy read
delayMicroseconds(15); //The conversion can occur as often as once every 12us
}
rssi[i] = CYRF_ReadRegister(CYRF_13_RSSI)&0x1F;
}
for (i = 0; i < len; i++)
@ -262,7 +261,9 @@ void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uin
rssi[j] = 0xff;
}
}
CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20); // Abort RX operation
CYRF_SetTxRxMode(TX_EN);
CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20); // Clear abort RX
}
#if defined(DEVO_CYRF6936_INO) || defined(J6PRO_CYRF6936_INO)
@ -297,4 +298,5 @@ static void __attribute__((unused)) CYRF_PROGMEM_ConfigSOPCode(const uint8_t *da
for(uint8_t i=0;i<8;i++)
code[i]=pgm_read_byte_near(&data[i]);
CYRF_ConfigSOPCode(code);
}
}
#endif

11
Multiprotocol/Convert.ino
View File

@ -15,17 +15,6 @@
/************************/
/** Convert routines **/
/************************/
int16_t map( int16_t x, int16_t in_min, int16_t in_max, int16_t out_min, int16_t out_max)
{
// return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
long y ;
x -= in_min ;
y = out_max - out_min ;
y *= x ;
x = y / (in_max - in_min) ;
return x + out_min ;
}
// Channel value is converted to 8bit values full scale
uint8_t convert_channel_8b(uint8_t num)
{

32
Multiprotocol/DSM_cyrf6936.ino
View File

@ -135,8 +135,7 @@ static uint8_t __attribute__((unused)) get_pn_row(uint8_t channel)
}
const uint8_t PROGMEM init_vals[][2] = {
{CYRF_02_TX_CTRL, 0x03}, // TX interrupt complete and error enabled
//0x00 in deviation but needed to know when transmit is over
{CYRF_02_TX_CTRL, 0x00}, // All TX interrupt disabled
{CYRF_05_RX_CTRL, 0x00}, // All RX interrupt disabled
{CYRF_28_CLK_EN, 0x02}, // Force receive clock enable
{CYRF_32_AUTO_CAL_TIME, 0x3c}, // Default init value
@ -369,13 +368,13 @@ static uint8_t __attribute__((unused)) DSM_Check_RX_packet()
uint16_t ReadDsm()
{
#define DSM_CH1_CH2_DELAY 4010 // Time between write of channel 1 and channel 2
#define DSM_WRITE_DELAY 1550 // Time after write to verify write complete
#define DSM_WRITE_DELAY 1950 // Time after write to verify write complete
#define DSM_READ_DELAY 600 // Time before write to check read phase, and switch channels. Was 400 but 600 seems what the 328p needs to read a packet
uint16_t start;
#if defined DSM_TELEMETRY
uint8_t rx_phase;
uint8_t len;
#endif
uint8_t start;
switch(phase)
{
@ -451,19 +450,28 @@ uint16_t ReadDsm()
return DSM_WRITE_DELAY;
case DSM_CH1_CHECK_A:
case DSM_CH1_CHECK_B:
start=micros();
while ((uint16_t)micros()-start < 500) // Wait max 500µs
if(CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS) & 0x02)
break;
set_sop_data_crc();
phase++; // change from CH1_CHECK to CH2_WRITE
return DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY;
case DSM_CH2_CHECK_A:
case DSM_CH2_CHECK_B:
start=micros();
while ((uint16_t)micros()-start < 500) // Wait max 500µs
while ((uint8_t)micros()-start < 100) // Wait max 100µs, max I've seen is 50µs
if(CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS) & 0x02)
break;
if(phase==DSM_CH1_CHECK_A || phase==DSM_CH1_CHECK_B)
{
#if defined DSM_TELEMETRY
// reset cyrf6936 if freezed after switching from TX to RX
if (((CYRF_ReadRegister(CYRF_04_TX_IRQ_STATUS) & 0x22) == 0x20) || (CYRF_ReadRegister(CYRF_02_TX_CTRL) & 0x80))
{
CYRF_Reset();
cyrf_config();
cyrf_configdata();
CYRF_SetTxRxMode(TX_EN);
}
#endif
set_sop_data_crc();
phase++; // change from CH1_CHECK to CH2_WRITE
return DSM_CH1_CH2_DELAY - DSM_WRITE_DELAY;
}
if (phase == DSM_CH2_CHECK_A)
CYRF_SetPower(0x28); //Keep transmit power in sync
#if defined DSM_TELEMETRY

2
Multiprotocol/Devo_cyrf6936.ino
View File

@ -63,7 +63,7 @@ static void __attribute__((unused)) DEVO_add_pkt_suffix()
BIND_SET_PULLUP; // set pullup
if(IS_BIND_BUTTON_on)
{
eeprom_write_byte((uint8_t*)(30+mode_select),0x01); // Set fixed id mode for the current model
eeprom_write_byte((EE_ADDR)(30+mode_select),0x01); // Set fixed id mode for the current model
option=1;
}
BIND_SET_OUTPUT;

591
Multiprotocol/Flysky_afhds2a_a7105.ino
View File

@ -1,321 +1,314 @@
// adaptation de https://github.com/goebish/deviation/blob/c5dd9fcc1441fc05fe9effa4c378886aeb3938d4/src/protocol/flysky_afhds2a_a7105.c
#ifdef AFHDS2A_A7105_INO
#define EEPROMadress 0 // rx ID 32bit
#define SERVO_HZ 0 //Frequency's servo 0=50 1=400 2=5
#define TXPACKET_SIZE 38
#define RXPACKET_SIZE 37
#define NUMFREQ 16
#define TXID_SIZE 4
#define RXID_SIZE 4
#define EEPROMadress 0 // rx ID 32bit
#define SERVO_HZ 50 //Frequency's servo 0=50 1=400 2=5
static uint8_t txid[RXID_SIZE];
static uint8_t rxid[RXID_SIZE];
static uint8_t packet_type;
static uint8_t bind_reply;
#define TXPACKET_SIZE 38
#define RXPACKET_SIZE 37
#define NUMFREQ 16
static uint8_t txid[4];
static uint8_t rxid[4];
static uint8_t packet_type;
static uint8_t bind_reply;
enum{
PACKET_STICKS,
PACKET_SETTINGS,
PACKET_FAILSAFE,
};
enum{
PACKET_STICKS,
PACKET_SETTINGS,
PACKET_FAILSAFE,
};
enum{
BIND1,
BIND2,
BIND3,
BIND4,
DATA1,
};
enum {
PWM_IBUS = 0,
PPM_IBUS,
PWM_SBUS,
PPM_SBUS
};
enum{
BIND1,
BIND2,
BIND3,
BIND4,
DATA1,
};
enum {
PWM_IBUS = 0,
PPM_IBUS,
PWM_SBUS,
PPM_SBUS
};
static void build_packet(uint8_t type) {
switch(type) {
case PACKET_STICKS:
packet[0] = 0x58;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
for(uint8_t ch=0; ch<14; ch++) {
packet[9 + ch*2] = Servo_data[CH_AETR[ch]]&0xFF;
packet[10 + ch*2] = (Servo_data[CH_AETR[ch]]>>8)&0xFF;
static void build_packet(uint8_t type) {
switch(type) {
case PACKET_STICKS:
packet[0] = 0x58;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
for(uint8_t ch=0; ch<14; ch++) {
packet[9 + ch*2] = Servo_data[CH_AETR[ch]]&0xFF;
packet[10 + ch*2] = (Servo_data[CH_AETR[ch]]>>8)&0xFF;
}
packet[37] = 0x00;
break;
case PACKET_FAILSAFE:
packet[0] = 0x56;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
for(uint8_t ch=0; ch<14; ch++) {
if(ch==0) {
// if(ch < Model.num_channels && (Model.limits[ch].flags & CH_FAILSAFE_EN)) {
packet[9 + ch*2] = Servo_data[AUX11] & 0xff;
packet[10+ ch*2] = (Servo_data[AUX11] >> 8) & 0xff;
}
packet[37] = 0x00;
else {
packet[9 + ch*2] = 0xff;
packet[10+ ch*2] = 0xff;
}
}
packet[37] = 0x00;
break;
case PACKET_SETTINGS:
packet[0] = 0xaa;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
packet[9] = 0xfd;
packet[10]= 0xff;
packet[11]= SERVO_HZ & 0xff;
packet[12]= (SERVO_HZ >> 8) & 0xff;
if(option == PPM_IBUS || option == PPM_SBUS)
packet[13] = 0x01; // PPM output enabled
else
packet[13] = 0x00;
packet[14]= 0x00;
for(uint8_t i=15; i<37; i++)
packet[i] = 0xff;
packet[18] = 0x05; // ?
packet[19] = 0xdc; // ?
packet[20] = 0x05; // ?
if(option == PWM_SBUS || option == PPM_SBUS)
packet[21] = 0xdd; // SBUS output enabled
else
packet[21] = 0xde;
packet[37] = 0x00;
break;
}
}
// telemetry sensors ID
enum{
SENSOR_RX_VOLTAGE = 0x00,
SENSOR_RX_ERR_RATE = 0xfe,
SENSOR_RX_RSSI = 0xfc,
SENSOR_RX_NOISE = 0xfb,
SENSOR_RX_SNR = 0xfa,
};
static void update_telemetry() {
// AA | TXID | RXID | sensor id | sensor # | value 16 bit big endian | sensor id ......
// max 7 sensors per packet
for(uint8_t sensor=0; sensor<7; sensor++) {
uint8_t index = 9+(4*sensor);
switch(packet[index]) {
case SENSOR_RX_VOLTAGE:
v_lipo = packet[index+3]<<8 | packet[index+2];
telemetry_link=1;
break;
case PACKET_SETTINGS:
packet[0] = 0xaa;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
packet[9] = 0xfd;
packet[10]= 0xff;
packet[11]= SERVO_HZ & 0xff;
packet[12]= (SERVO_HZ >> 8) & 0xff;
if(option == PPM_IBUS || option == PPM_SBUS)
packet[13] = 0x01; // PPM output enabled
else
packet[13] = 0x00;
packet[14]= 0x00;
for(uint8_t i=15; i<37; i++)
packet[i] = 0xff;
packet[18] = 0x05; // ?
packet[19] = 0xdc; // ?
packet[20] = 0x05; // ?
if(option == PWM_SBUS || option == PPM_SBUS)
packet[21] = 0xdd; // SBUS output enabled
else
packet[21] = 0xde;
packet[37] = 0x00;
case SENSOR_RX_ERR_RATE:
// packet[index+2];
break;
case PACKET_FAILSAFE:
packet[0] = 0x56;
memcpy( &packet[1], txid, 4);
memcpy( &packet[5], rxid, 4);
for(uint8_t ch=0; ch<14; ch++) {
if(ch==0) {
// if(ch < Model.num_channels && (Model.limits[ch].flags & CH_FAILSAFE_EN)) {
uint32_t value = ((uint32_t)Servo_data[AUX11] + 100) * 5 + 1000;
packet[9 + ch*2] = value & 0xff;
packet[10+ ch*2] = (value >> 8) & 0xff;
case SENSOR_RX_RSSI:
RSSI_dBm = -packet[index+2];
break;
case 0xff:
return;
default:
// unknown sensor ID
break;
}
}
}
static void afhds2a_build_bind_packet() {
uint8_t ch;
memcpy( &packet[1], txid, 4);
memset( &packet[5], 0xff, 4);
packet[10]= 0x00;
for(ch=0; ch<16; ch++) {
packet[11+ch] = hopping_frequency[ch];
}
memset( &packet[27], 0xff, 10);
packet[37] = 0x00;
switch(phase) {
case BIND1:
packet[0] = 0xbb;
packet[9] = 0x01;
break;
case BIND2:
case BIND3:
case BIND4:
packet[0] = 0xbc;
if(phase == BIND4) {
memcpy( &packet[5], &rxid, 4);
memset( &packet[11], 0xff, 16);
}
packet[9] = phase-1;
if(packet[9] > 0x02)
packet[9] = 0x02;
packet[27]= 0x01;
packet[28]= 0x80;
break;
}
}
static void calc_afhds_channels() {
int idx = 0;
uint32_t rnd = MProtocol_id;
while (idx < NUMFREQ) {
int i;
int count_1_42 = 0, count_43_85 = 0, count_86_128 = 0, count_129_168=0;
rnd = rnd * 0x0019660D + 0x3C6EF35F; // Randomization
uint8_t next_ch = ((rnd >> (idx%32)) % 0xa8) + 1;
// Keep the distance 2 between the channels - either odd or even
if (((next_ch ^ MProtocol_id) & 0x01 )== 0)
continue;
// Check that it's not duplicate and spread uniformly
for (i = 0; i < idx; i++) {
if(hopping_frequency[i] == next_ch)
break;
if(hopping_frequency[i] <= 42)
count_1_42++;
else if (hopping_frequency[i] <= 85)
count_43_85++;
else if (hopping_frequency[i] <= 128)
count_86_128++;
else
count_129_168++;
}
if (i != idx)
continue;
if ((next_ch <= 42 && count_1_42 < 5)
||(next_ch >= 43 && next_ch <= 85 && count_43_85 < 5)
||(next_ch >= 86 && next_ch <=128 && count_86_128 < 5)
||(next_ch >= 129 && count_129_168 < 5))
{
hopping_frequency[idx++] = next_ch;
}
}
}
#define WAIT_WRITE 0x80
static uint16_t afhds2a_cb() {
switch(phase) {
case BIND1:
case BIND2:
case BIND3:
A7105_Strobe(A7105_STANDBY);
afhds2a_build_bind_packet();
A7105_WriteData(38, packet_count%2 ? 0x0d : 0x8c);
if(A7105_ReadReg(0) == 0x1b) { // todo: replace with check crc+fec
A7105_Strobe(A7105_RST_RDPTR);
A7105_ReadData(RXPACKET_SIZE);
if(packet[0] == 0xbc) {
for(uint8_t i=0; i<4; i++) {
rxid[i] = packet[5+i];
}
else {
packet[9 + ch*2] = 0xff;
packet[10+ ch*2] = 0xff;
}
}
packet[37] = 0x00;
break;
}
}
#if defined(TELEMETRY)
// telemetry sensors ID
enum{
SENSOR_RX_VOLTAGE = 0x00,
SENSOR_RX_ERR_RATE = 0xfe,
SENSOR_RX_RSSI = 0xfc,
SENSOR_RX_NOISE = 0xfb,
SENSOR_RX_SNR = 0xfa,
};
static void update_telemetry() {
// AA | TXID | RXID | sensor id | sensor # | value 16 bit big endian | sensor id ......
// max 7 sensors per packet
for(uint8_t sensor=0; sensor<7; sensor++) {
uint8_t index = 9+(4*sensor);
switch(packet[index]) {
case SENSOR_RX_VOLTAGE:
v_lipo = packet[index+3]<<8 | packet[index+2];
telemetry_link=1;
break;
case SENSOR_RX_ERR_RATE:
// packet[index+2];
break;
case SENSOR_RX_RSSI:
RSSI_dBm = -packet[index+2];
break;
case 0xff:
return;
default:
// unknown sensor ID
break;
eeprom_write_block((const void*)rxid,(EE_ADDR)EEPROMadress,4);
if(packet[9] == 0x01)
phase = BIND4;
}
}
}
#endif
static void afhds2a_build_bind_packet() {
uint8_t ch;
memcpy( &packet[1], txid, 4);
memset( &packet[5], 0xff, 4);
packet[10]= 0x00;
for(ch=0; ch<16; ch++) {
packet[11+ch] = hopping_frequency[ch];
}
memset( &packet[27], 0xff, 10);
packet[37] = 0x00;
switch(phase) {
case BIND1:
packet[0] = 0xbb;
packet[9] = 0x01;
break;
case BIND2:
case BIND3:
case BIND4:
packet[0] = 0xbc;
if(phase == BIND4) {
memcpy( &packet[5], &rxid, 4);
memset( &packet[11], 0xff, 16);
}
packet[9] = phase-1;
if(packet[9] > 0x02)
packet[9] = 0x02;
packet[27]= 0x01;
packet[28]= 0x80;
break;
}
}
static void calc_afhds_channels(uint32_t seed) {
int idx = 0;
uint32_t rnd = seed;
while (idx < NUMFREQ) {
int i;
int count_1_42 = 0, count_43_85 = 0, count_86_128 = 0, count_129_168=0;
rnd = rnd * 0x0019660D + 0x3C6EF35F; // Randomization
uint8_t next_ch = ((rnd >> (idx%32)) % 0xa8) + 1;
// Keep the distance 2 between the channels - either odd or even
if (((next_ch ^ seed) & 0x01 )== 0)
continue;
// Check that it's not duplicate and spread uniformly
for (i = 0; i < idx; i++) {
if(hopping_frequency[i] == next_ch)
break;
if(hopping_frequency[i] <= 42)
count_1_42++;
else if (hopping_frequency[i] <= 85)
count_43_85++;
else if (hopping_frequency[i] <= 128)
count_86_128++;
else
count_129_168++;
}
if (i != idx)
continue;
if ((next_ch <= 42 && count_1_42 < 5)
||(next_ch >= 43 && next_ch <= 85 && count_43_85 < 5)
||(next_ch >= 86 && next_ch <=128 && count_86_128 < 5)
||(next_ch >= 129 && count_129_168 < 5))
{
hopping_frequency[idx++] = next_ch;
}
}
}
#define WAIT_WRITE 0x80
static uint16_t afhds2a_cb() {
switch(phase) {
case BIND1:
case BIND2:
case BIND3:
A7105_Strobe(A7105_STANDBY);
afhds2a_build_bind_packet();
A7105_WriteData(38, packet_count%2 ? 0x0d : 0x8c);
if(A7105_ReadReg(0) == 0x1b) { // todo: replace with check crc+fec
packet_count++;
phase |= WAIT_WRITE;
return 1700;
case BIND1|WAIT_WRITE:
case BIND2|WAIT_WRITE:
case BIND3|WAIT_WRITE:
A7105_Strobe(A7105_RX);
phase &= ~WAIT_WRITE;
phase++;
if(phase > BIND3)
phase = BIND1;
return 2150;
case BIND4:
A7105_Strobe(A7105_STANDBY);
afhds2a_build_bind_packet();
A7105_WriteData(38, packet_count%2 ? 0x0d : 0x8c);
packet_count++;
bind_reply++;
if(bind_reply>=4) {
packet_count=0;
channel=1;
phase = DATA1;
BIND_DONE;
}
phase |= WAIT_WRITE;
return 1700;
case BIND4|WAIT_WRITE:
A7105_Strobe(A7105_RX);
phase &= ~WAIT_WRITE;
return 2150;
case DATA1:
A7105_Strobe(A7105_STANDBY);
build_packet(packet_type);
A7105_WriteData(38, hopping_frequency[channel++]);
if(channel >= 16)
channel = 0;
if(!(packet_count % 1313))
packet_type = PACKET_SETTINGS;
else if(!(packet_count % 1569))
packet_type = PACKET_FAILSAFE;
else
packet_type = PACKET_STICKS; // todo : check for settings changes
// got some data from RX ?
// we've no way to know if RX fifo has been filled
// as we can't poll GIO1 or GIO2 to check WTR
// we can't check A7105_MASK_TREN either as we know
// it's currently in transmit mode.
if(!(A7105_ReadReg(0) & (1<<5 | 1<<6))) { // FECF+CRCF Ok
A7105_Strobe(A7105_RST_RDPTR);
A7105_ReadData(1);
if(packet[0] == 0xaa) {
A7105_Strobe(A7105_RST_RDPTR);
A7105_ReadData(RXPACKET_SIZE);
if(packet[0] == 0xbc) {
for(uint8_t i=0; i<4; i++) {
rxid[i] = packet[5+i];
}
eeprom_write_block((const void*)rxid,(void*)EEPROMadress,4);
if(packet[9] == 0x01)
phase = BIND4;
if(packet[9] == 0xfc) { // rx is asking for settings
packet_type=PACKET_SETTINGS;
}
else {
update_telemetry();
}
}
packet_count++;
phase |= WAIT_WRITE;
return 1700;
case BIND1|WAIT_WRITE:
case BIND2|WAIT_WRITE:
case BIND3|WAIT_WRITE:
A7105_Strobe(A7105_RX);
phase &= ~WAIT_WRITE;
phase++;
if(phase > BIND3)
phase = BIND1;
return 2150;
case BIND4:
A7105_Strobe(A7105_STANDBY);
afhds2a_build_bind_packet();
A7105_WriteData(38, packet_count%2 ? 0x0d : 0x8c);
packet_count++;
bind_reply++;
if(bind_reply>=4) {
packet_count=0;
channel=1;
phase = DATA1;
BIND_DONE;
}
phase |= WAIT_WRITE;
return 1700;
case BIND4|WAIT_WRITE:
A7105_Strobe(A7105_RX);
phase &= ~WAIT_WRITE;
return 2150;
case DATA1:
A7105_Strobe(A7105_STANDBY);
build_packet(packet_type);
A7105_WriteData(38, hopping_frequency[channel++]);
if(channel >= 16)
channel = 0;
if(!(packet_count % 1313))
packet_type = PACKET_SETTINGS;
else if(!(packet_count % 1569))
packet_type = PACKET_FAILSAFE;
else
packet_type = PACKET_STICKS; // todo : check for settings changes
// got some data from RX ?
// we've no way to know if RX fifo has been filled
// as we can't poll GIO1 or GIO2 to check WTR
// we can't check A7105_MASK_TREN either as we know
// it's currently in transmit mode.
if(!(A7105_ReadReg(0) & (1<<5 | 1<<6))) { // FECF+CRCF Ok
A7105_Strobe(A7105_RST_RDPTR);
A7105_ReadData(1);
if(packet[0] == 0xaa) {
A7105_Strobe(A7105_RST_RDPTR);
A7105_ReadData(RXPACKET_SIZE);
if(packet[9] == 0xfc) { // rx is asking for settings
packet_type=PACKET_SETTINGS;
}
else {
#if defined(TELEMETRY)
update_telemetry();
#endif
}
}
}
packet_count++;
phase |= WAIT_WRITE;
return 1700;
case DATA1|WAIT_WRITE:
phase &= ~WAIT_WRITE;
A7105_Strobe(A7105_RX);
return 2150;
}
return 3850; // never reached, please the compiler
}
packet_count++;
phase |= WAIT_WRITE;
return 1700;
case DATA1|WAIT_WRITE:
phase &= ~WAIT_WRITE;
A7105_Strobe(A7105_RX);
return 2150;
}
return 3850; // never reached, please the compiler
}
static uint16_t AFHDS2A_setup()
{
A7105_Init(INIT_FLYSKY_AFHDS2A); //flysky_init();
for (uint8_t i = 0; i < 4; ++i) {
txid[i] = rx_tx_addr[i];
}
static uint16_t AFHDS2A_setup()
{
A7105_Init(INIT_FLYSKY_AFHDS2A); //flysky_init();
for (u8 i = 0; i < TXID_SIZE; ++i) {
txid[i] = rx_tx_addr[0];
}
calc_afhds_channels(MProtocol_id);
packet_type = PACKET_STICKS;
packet_count = 0;
bind_reply = 0;
if(IS_AUTOBIND_FLAG_on) {
phase = BIND1;
BIND_IN_PROGRESS;
}
else {
phase = DATA1;
eeprom_read_block((void*)rxid,(const void*)EEPROMadress,4);
}
channel = 0;
return 50000;
calc_afhds_channels();
packet_type = PACKET_STICKS;
packet_count = 0;
bind_reply = 0;
if(IS_AUTOBIND_FLAG_on) {
phase = BIND1;
BIND_IN_PROGRESS;
}
else {
phase = DATA1;
eeprom_read_block((void*)rxid,(EE_ADDR)EEPROMadress,4);
}
channel = 0;
return 50000;
}
#endif

11
Multiprotocol/FrSkyX_cc2500.ino
View File

@ -274,13 +274,14 @@ uint16_t ReadFrSkyX()
return 3000;
case FRSKY_DATA4:
len = CC2500_ReadReg(CC2500_3B_RXBYTES | CC2500_READ_BURST) & 0x7F;
if (len && (len<MAX_PKT))
if (len && (len<=(0x0E + 3))) //Telemetry frame is 17
{
counter=0;
CC2500_ReadData(pkt, len);
#if defined TELEMETRY
frsky_check_telemetry(pkt,len); //check if valid telemetry packets
//parse telemetry packets here
//The same telemetry function used by FrSky(D8).
frsky_check_telemetry(pkt,len); //check if valid telemetry packets
//parse telemetry packets here
//The same telemetry function used by FrSky(D8).
#endif
}
else
@ -292,7 +293,9 @@ uint16_t ReadFrSkyX()
seq_last_sent = 0;
seq_last_rcvd = 8;
counter=0;
telemetry_lost=1;
}
CC2500_Strobe(CC2500_SFRX); //flush the RXFIFO
}
state = FRSKY_DATA1;
return 300;

2
Multiprotocol/MT99xx_nrf24l01.ino
View File

@ -58,7 +58,7 @@ const uint8_t h7_mys_byte[] = {
0x05, 0x15, 0x06, 0x16, 0x07, 0x17, 0x00, 0x10
};
static const u8 ls_mys_byte[] = {
static const uint8_t ls_mys_byte[] = {
0x05, 0x15, 0x25, 0x06, 0x16, 0x26,
0x07, 0x17, 0x27, 0x00, 0x10, 0x20,
0x01, 0x11, 0x21, 0x02, 0x12, 0x22,

0
Multiprotocol/Makefile.xmega → Multiprotocol/Makefile.orangetx
View File

2
Multiprotocol/MultiOrange.cpp.xmega → Multiprotocol/MultiOrange.cpp.orangetx
View File

@ -1,7 +1,7 @@
#define ARDUINO_AVR_PRO 1
//#define __AVR_ATmega328P__ 1
#define XMEGA 1
#define ORANGE_TX 1
// For BLUE module use:
//#define DSM_BLUE

411
Multiprotocol/Multiprotocol.ino
View File

@ -21,24 +21,34 @@
You should have received a copy of the GNU General Public License
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/eeprom.h>
#include <avr/pgmspace.h>
//#define DEBUG_TX
#include "Pins.h"
#include "Multiprotocol.h"
//Multiprotocol module configuration file
#include "_Config.h"
#include "Pins.h"
#include "TX_Def.h"
#include "Validate.h"
#ifdef XMEGA
#undef ENABLE_PPM // Disable PPM for OrangeTX module
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#ifndef STM32_BOARD
#include <avr/eeprom.h>
#else
/*
#include <arduino.h>
#include <libmaple/usart.h>
#include <libmaple/timer.h>
#include <SPI.h>
#include <EEPROM.h>
HardwareTimer timer(2);
void PPM_decode();
void ISR_COMPB();
extern "C"
{
void __irq_usart2(void);
void __irq_usart3(void);
}
*/
#endif
//Global constants/variables
@ -58,7 +68,7 @@ uint16_t servo_max_100,servo_min_100,servo_max_125,servo_min_125;
// Protocol variables
uint8_t cyrfmfg_id[6];//for dsm2 and devo
uint8_t rx_tx_addr[5];
uint8_t rx_tx_addr[5];
uint8_t phase;
uint16_t bind_counter;
uint8_t bind_phase;
@ -98,7 +108,7 @@ uint8_t protocol_flags=0,protocol_flags2=0;
// PPM variable
volatile uint16_t PPM_data[NUM_CHN];
#ifndef XMEGA
#ifndef ORANGE_TX
//Random variable
volatile uint32_t gWDT_entropy=0;
#endif
@ -118,35 +128,13 @@ volatile uint8_t rx_buff[RXBUFFER_SIZE];
volatile uint8_t rx_ok_buff[RXBUFFER_SIZE];
volatile uint8_t discard_frame = 0;
//Make sure telemetry is selected correctly
#ifndef TELEMETRY
#undef INVERT_TELEMETRY
#undef DSM_TELEMETRY
#undef SPORT_TELEMETRY
#undef HUB_TELEMETRY
#else
#if not defined(CYRF6936_INSTALLED) || not defined(DSM_CYRF6936_INO)
#undef DSM_TELEMETRY
#endif
#if (not defined(CC2500_INSTALLED) || not defined(FRSKYD_CC2500_INO)) && (not defined(A7105_INSTALLED) || not defined(HUBSAN_A7105_INO))
#undef HUB_TELEMETRY
#endif
#if not defined(CC2500_INSTALLED) || not defined(FRSKYX_CC2500_INO)
#undef SPORT_TELEMETRY
#endif
#endif
#if not defined(DSM_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(SPORT_TELEMETRY)
#undef TELEMETRY
#undef INVERT_TELEMETRY
#endif
// Telemetry
#define MAX_PKT 27
uint8_t pkt[MAX_PKT];//telemetry receiving packets
#if defined(TELEMETRY)
#ifdef INVERT_TELEMETRY
// enable bit bash for serial
#ifndef XMEGA
#if not defined(ORANGE_TX) && not defined(STM32_BOARD)
// enable bit bash for serial
#define BASH_SERIAL 1
#endif
#define INVERT_SERIAL 1
@ -161,9 +149,9 @@ uint8_t pkt[MAX_PKT];//telemetry receiving packets
#endif // BASH_SERIAL
uint8_t v_lipo;
int16_t RSSI_dBm;
//const uint8_t RSSI_offset=72;//69 71.72 values db
uint8_t telemetry_link=0;
uint8_t telemetry_counter=0;
uint8_t telemetry_lost;
#endif
// Callback
@ -173,8 +161,9 @@ void_function_t remote_callback = 0;
// Init
void setup()
{
#ifdef XMEGA
// General pinout
#ifdef ORANGE_TX
//XMEGA
PORTD.OUTSET = 0x17 ;
PORTD.DIRSET = 0xB2 ;
PORTD.DIRCLR = 0x4D ;
@ -190,11 +179,43 @@ void setup()
TCC1.PER = 0xFFFF ;
TCNT1 = 0 ;
TCC1.CTRLA = 0x0B ; // Event3 (prescale of 16)
#elif defined STM32_BOARD
//STM32
pinMode(A7105_CSN_pin,OUTPUT);
pinMode(CC25_CSN_pin,OUTPUT);
pinMode(NRF_CSN_pin,OUTPUT);
pinMode(CYRF_CSN_pin,OUTPUT);
pinMode(CYRF_RST_pin,OUTPUT);
pinMode(PE1_pin,OUTPUT);
pinMode(PE2_pin,OUTPUT);
#if defined TELEMETRY
pinMode(TX_INV_pin,OUTPUT);
pinMode(RX_INV_pin,OUTPUT);
#if defined INVERT_SERIAL
TX_INV_on;//activated inverter for both serial TX and RX signals
RX_INV_on;
#else
TX_INV_off;
RX_INV_off;
#endif
#endif
pinMode(BIND_pin,INPUT_PULLUP);
pinMode(PPM_pin,INPUT);
pinMode(S1_pin,INPUT_PULLUP);//dial switch
pinMode(S2_pin,INPUT_PULLUP);
pinMode(S3_pin,INPUT_PULLUP);
pinMode(S4_pin,INPUT_PULLUP);
//Random pins
pinMode(PB0, INPUT_ANALOG); // set up pin for analog input
pinMode(PB1, INPUT_ANALOG); // set up pin for analog input
//select the counter clock.
start_timer2();//0.5us
#else
// General pinout
//ATMEGA328p
// all inputs
DDRB=0x00;DDRC=0x00;DDRD=0x00;
// outputs
// outputs
SDI_output;
SCLK_output;
#ifdef A7105_INSTALLED
@ -243,8 +264,12 @@ void setup()
NRF_CSN_on;
#endif
// Set SPI lines
SDI_on;
SCLK_off;
#ifdef STM32_BOARD
initSPI2();
#else
SDI_on;
SCLK_off;
#endif
// Set servos positions
for(uint8_t i=0;i<NUM_CHN;i++)
@ -265,6 +290,8 @@ void setup()
// after this mode_select will be one of {0000, 0001, ..., 1111}
#ifndef ENABLE_PPM
mode_select = MODE_SERIAL ; // force serial mode
#elif defined STM32_BOARD
mode_select= 0x0F -(uint8_t)(((GPIOA->regs->IDR)>>4)&0x0F);
#else
// mode_select=0x0F - ( ( (PINB>>2)&0x07 ) | ( (PINC<<3)&0x08) );//encoder dip switches 1,2,4,8=>B2,B3,B4,C0
mode_select =
@ -281,9 +308,13 @@ void setup()
//Init RF modules
modules_reset();
#ifndef XMEGA
#ifndef ORANGE_TX
//Init the seed with a random value created from watchdog timer for all protocols requiring random values
randomSeed(random_value());
#ifdef STM32_BOARD
randomSeed((uint32_t)analogRead(PB0) << 10 | analogRead(PB1));
#else
randomSeed(random_value());
#endif
#endif
// Read or create protocol id
@ -308,16 +339,20 @@ void setup()
protocol_init();
//Configure PPM interrupt
#if PPM_pin == 2
EICRA |= _BV(ISC01); // The rising edge of INT0 pin D2 generates an interrupt request
EIMSK |= _BV(INT0); // INT0 interrupt enable
#elif PPM_pin == 3
EICRA |=_BV(ISC11); // The rising edge of INT1 pin D3 generates an interrupt request
EIMSK |= _BV(INT1); // INT1 interrupt enable
#else
#error PPM pin can only be 2 or 3
#endif
#ifndef STM32_BOARD
//Configure PPM interrupt
#if PPM_pin == 2
EICRA |= _BV(ISC01); // The rising edge of INT0 pin D2 generates an interrupt request
EIMSK |= _BV(INT0); // INT0 interrupt enable
#elif PPM_pin == 3
EICRA |=_BV(ISC11); // The rising edge of INT1 pin D3 generates an interrupt request
EIMSK |= _BV(INT1); // INT1 interrupt enable
#else
#error PPM pin can only be 2 or 3
#endif
#else
attachInterrupt(PPM_pin,PPM_decode,FALLING);
#endif
#if defined(TELEMETRY)
PPM_Telemetry_serial_init(); // Configure serial for telemetry
@ -353,14 +388,25 @@ void loop()
}
while(remote_callback==0);
}
if( (TIFR1 & OCF1A_bm) != 0)
{
cli(); // Disable global int due to RW of 16 bits registers
OCR1A=TCNT1; // Callback should already have been called... Use "now" as new sync point.
sei(); // Enable global int
}
else
while((TIFR1 & OCF1A_bm) == 0); // Wait before callback
#ifndef STM32_BOARD
if( (TIFR1 & OCF1A_bm) != 0)
{
cli(); // Disable global int due to RW of 16 bits registers
OCR1A=TCNT1; // Callback should already have been called... Use "now" as new sync point.
sei(); // Enable global int
}
else
while((TIFR1 & OCF1A_bm) == 0); // Wait before callback
#else
if((TIMER2_BASE->SR & TIMER_SR_CC1IF)!=0)
{
cli();
OCR1A = TCNT1;
sei();
}
else
while((TIMER2_BASE->SR & TIMER_SR_CC1IF )==0); // Wait before callback
#endif
do
{
TX_MAIN_PAUSE_on;
@ -373,18 +419,30 @@ void loop()
next_callback-=2000; // We will wait below for 2ms
cli(); // Disable global int due to RW of 16 bits registers
OCR1A += 2000*2 ; // set compare A for callback
#ifndef STM32_BOARD
TIFR1=OCF1A_bm; // clear compare A=callback flag
#else
TIMER2_BASE->SR &= ~TIMER_SR_CC1IF; //clear compare Flag
#endif
sei(); // enable global int
Update_All();
if(IS_CHANGE_PROTOCOL_FLAG_on)
break; // Protocol has been changed
while((TIFR1 & OCF1A_bm) == 0); // wait 2ms...
#ifndef STM32_BOARD
while((TIFR1 & OCF1A_bm) == 0); // wait 2ms...
#else
while((TIMER2_BASE->SR & TIMER_SR_CC1IF)==0);//2ms wait
#endif
}
// at this point we have a maximum of 4ms in next_callback
next_callback *= 2 ;
cli(); // Disable global int due to RW of 16 bits registers
OCR1A+= next_callback ; // set compare A for callback
TIFR1=OCF1A_bm; // clear compare A=callback flag
#ifndef STM32_BOARD
TIFR1=OCF1A_bm; // clear compare A=callback flag
#else
TIMER2_BASE->SR &= ~TIMER_SR_CC1IF; //clear compare Flag write zero
#endif
diff=OCR1A-TCNT1; // compare timer and comparator
sei(); // enable global int
}
@ -400,13 +458,6 @@ void Update_All()
{
update_serial_data(); // Update protocol and data
update_aux_flags();
if(Servo_data[AUX10]>PPM_SWITCH && !( (cur_protocol[0]&0x1F)==MODE_FRSKYD || (cur_protocol[0]&0x1F)==MODE_DSM || (cur_protocol[0]&0x1F)==MODE_AFHDS2A ) ) { CHANGE_PROTOCOL_FLAG_on; } // Rebind voie
if(IS_CHANGE_PROTOCOL_FLAG_on)
{ // Protocol needs to be changed
LED_off; //led off during protocol init
modules_reset(); //reset all modules
protocol_init(); //init new protocol
}
}
#endif //ENABLE_SERIAL
#ifdef ENABLE_PPM
@ -440,6 +491,16 @@ static void update_aux_flags(void)
for(uint8_t i=0;i<8;i++)
if(Servo_data[AUX1+i]>PPM_SWITCH)
Servo_AUX|=1<<i;
if(Servo_data[AUX10]>PPM_SWITCH && !( (cur_protocol[0]&0x1F)==MODE_FRSKYD || (cur_protocol[0]&0x1F)==MODE_DSM || (cur_protocol[0]&0x1F)==MODE_AFHDS2A ) ) { CHANGE_PROTOCOL_FLAG_on; } // Rebind voie
if(IS_CHANGE_PROTOCOL_FLAG_on)
{ // Protocol needs to be changed
LED_off; //led off during protocol init
modules_reset(); //reset all modules
#ifdef ENABLE_PPM
AUTOBIND_FLAG_on;
#endif //ENABLE_PPM
protocol_init(); //init new protocol
}
}
// Update led status based on binding and serial
@ -468,12 +529,14 @@ static void update_led_status(void)
inline void tx_pause()
{
#ifdef TELEMETRY
#ifdef XMEGA
USARTC0.CTRLA &= ~0x03 ; // Pause telemetry by disabling transmitter interrupt
#else
#ifndef BASH_SERIAL
UCSR0B &= ~_BV(UDRIE0); // Pause telemetry by disabling transmitter interrupt
#ifndef STM32_BOARD
#ifdef TELEMETRY
#ifdef ORANGE_TX
USARTC0.CTRLA &= ~0x03 ; // Pause telemetry by disabling transmitter interrupt
#else
#ifndef BASH_SERIAL
UCSR0B &= ~_BV(UDRIE0); // Pause telemetry by disabling transmitter interrupt
#endif
#endif
#endif
#endif
@ -481,24 +544,41 @@ inline void tx_pause()
inline void tx_resume()
{
#ifdef TELEMETRY
if(!IS_TX_PAUSE_on)
{
#ifdef XMEGA
cli() ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xFC) | 0x01 ; // Resume telemetry by enabling transmitter interrupt
sei() ;
#else
#ifndef BASH_SERIAL
UCSR0B |= _BV(UDRIE0); // Resume telemetry by enabling transmitter interrupt
#ifndef STM32_BOARD
#ifdef TELEMETRY
if(!IS_TX_PAUSE_on)
{
#ifdef ORANGE_TX
cli() ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xFC) | 0x01 ; // Resume telemetry by enabling transmitter interrupt
sei() ;
#else
resumeBashSerial() ;
#endif
#endif
}
#ifndef BASH_SERIAL
UCSR0B |= _BV(UDRIE0); // Resume telemetry by enabling transmitter interrupt
#else
resumeBashSerial() ;
#endif
#endif
}
#endif
#endif
}
#ifdef STM32_BOARD
void start_timer2()
{
// Pause the timer while we're configuring it
timer.pause();
TIMER2_BASE->PSC = 35; //36-1;for 72 MHZ /0.5sec/(35+1)
TIMER2_BASE->ARR = 0xFFFF; //count till max
timer.setMode(TIMER_CH1, TIMER_OUTPUT_COMPARE);
timer.setMode(TIMER_CH2, TIMER_OUTPUT_COMPARE);
// Refresh the timer's count, prescale, and overflow
timer.refresh();
timer.resume();
}
#endif
// Protocol start
static void protocol_init()
{
@ -510,6 +590,7 @@ static void protocol_init()
tx_pause();
pass=0;
telemetry_link=0;
telemetry_lost=1;
#ifndef BASH_SERIAL
tx_tail=0;
tx_head=0;
@ -624,12 +705,12 @@ static void protocol_init()
{
if(IS_BIND_BUTTON_FLAG_on)
{
eeprom_write_byte((uint8_t*)(30+mode_select),0x00); // reset to autobind mode for the current model
eeprom_write_byte((EE_ADDR)(30+mode_select),0x00); // reset to autobind mode for the current model
option=0;
}
else
{
option=eeprom_read_byte((uint8_t*)(30+mode_select)); // load previous mode: autobind or fixed id
option=eeprom_read_byte((EE_ADDR)(30+mode_select)); // load previous mode: autobind or fixed id
if(option!=1) option=0; // if not fixed id mode then it should be autobind
}
}
@ -817,7 +898,11 @@ static void protocol_init()
cli(); // disable global int
OCR1A=TCNT1+next_callback*2; // set compare A for callback
sei(); // enable global int
TIFR1 = OCF1A_bm ; // clear compare A flag
#ifndef STM32_BOARD
TIFR1 = OCF1A_bm ; // clear compare A flag
#else
TIMER2_BASE->SR &= ~TIMER_SR_CC1IF; //clear compare Flag write zero
#endif
BIND_BUTTON_FLAG_off; // do not bind/reset id anymore even if protocol change
}
@ -873,7 +958,7 @@ void update_serial_data()
Servo_data[i]=((((*((uint32_t *)p))>>dec)&0x7FF)*5)/8+860; //value range 860<->2140 -125%<->+125%
}
RX_DONOTUPDTAE_off;
#ifdef XMEGA
#ifdef ORANGE_TX
cli();
#else
UCSR0B &= ~_BV(RXCIE0); // RX interrupt disable
@ -883,7 +968,7 @@ void update_serial_data()
RX_FLAG_on; // data to be processed next time...
RX_MISSED_BUFF_off;
}
#ifdef XMEGA
#ifdef ORANGE_TX
sei();
#else
UCSR0B |= _BV(RXCIE0) ; // RX interrupt enable
@ -912,7 +997,7 @@ void modules_reset()
void Mprotocol_serial_init()
{
#ifdef XMEGA
#ifdef ORANGE_TX
PORTC.OUTSET = 0x08 ;
PORTC.DIRSET = 0x08 ;
@ -923,10 +1008,17 @@ void Mprotocol_serial_init()
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x2B ;
UDR0 ;
#ifdef INVERT_TELEMETRY
#ifdef INVERT_SERIAL
PORTC.PIN3CTRL |= 0x40 ;
#endif
#elif defined STM32_BOARD
Serial1.begin(100000,SERIAL_8E2);//USART2
Serial2.begin(100000,SERIAL_8E2);//USART3
USART2_BASE->CR1 |= USART_CR1_PCE_BIT;
USART3_BASE->CR1 &= ~ USART_CR1_RE;//disable
USART2_BASE->CR1 &= ~ USART_CR1_TE;//disable transmit
#else
//ATMEGA328p
#include <util/setbaud.h>
UBRR0H = UBRRH_VALUE;
UBRR0L = UBRRL_VALUE;
@ -942,7 +1034,7 @@ void Mprotocol_serial_init()
initTXSerial( SPEED_100K ) ;
#endif //TELEMETRY
#endif //DEBUG_TX
#endif //XMEGA
#endif //ORANGE_TX
}
#if defined(TELEMETRY)
@ -967,7 +1059,7 @@ static void set_rx_tx_addr(uint32_t id)
rx_tx_addr[4] = (rx_tx_addr[2]&0xF0)|(rx_tx_addr[3]&0x0F);
}
#ifndef XMEGA
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
static void random_init(void)
{
cli(); // Temporarily turn off interrupts, until WDT configured
@ -986,25 +1078,35 @@ static uint32_t random_value(void)
static uint32_t random_id(uint16_t adress, uint8_t create_new)
{
#define nb_txid 5
uint32_t id;
uint8_t txid[nb_txid];
uint32_t id=0;
if (eeprom_read_byte((uint8_t*)(adress+10))==0xf0 && !create_new)
if(eeprom_read_byte((EE_ADDR)(adress+10))==0xf0 && !create_new)
{ // TXID exists in EEPROM
eeprom_read_block((void*)txid,(const void*)adress,nb_txid);
id=(txid[0] | ((uint32_t)txid[1]<<8) | ((uint32_t)txid[2]<<16) | ((uint32_t)txid[3]<<24));
// eeprom_read_block((void*)txid,(const void*)adress,nb_txid);
// id=(txid[0] | ((uint32_t)txid[1]<<8) | ((uint32_t)txid[2]<<16) | ((uint32_t)txid[3]<<24));
for(uint8_t i=4;i>0;i--)
{
id<<=8;
id|=eeprom_read_byte((EE_ADDR)adress+i-1);
}
if(id!=0x2AD141A7) //ID with seed=0
return id;
}
// Generate a random ID
id = random(0xfefefefe) + ((uint32_t)random(0xfefefefe) << 16);
txid[0]= (id &0xFF);
/* txid[0]= (id &0xFF);
txid[1] = ((id >> 8) & 0xFF);
txid[2] = ((id >> 16) & 0xFF);
txid[3] = ((id >> 24) & 0xFF);
eeprom_write_block((const void*)txid,(void*)adress,nb_txid);
eeprom_write_byte((uint8_t*)(adress+10),0xf0);//write bind flag in eeprom.
*/
for(uint8_t i=0;i<4;i++)
{
eeprom_write_byte((EE_ADDR)adress+i,id);
id>>=8;
}
eeprom_write_byte((EE_ADDR)(adress+10),0xf0);//write bind flag in eeprom.
return id;
}
@ -1016,12 +1118,14 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
//PPM
#ifdef ENABLE_PPM
#ifdef XMEGA
#ifdef ORANGE_TX
#if PPM_pin == 2
ISR(PORTD_INT0_vect)
#else
ISR(PORTD_INT1_vect)
#endif
#elif defined STM32_BOARD
void PPM_decode()
#else
#if PPM_pin == 2
ISR(INT0_vect, ISR_NOBLOCK)
@ -1056,15 +1160,19 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
//Serial RX
#ifdef ENABLE_SERIAL
#ifdef XMEGA
#ifdef ORANGE_TX
ISR(USARTC0_RXC_vect)
#elif defined STM32_BOARD
void __irq_usart2()
#else
ISR(USART_RX_vect)
#endif
{ // RX interrupt
static uint8_t idx=0;
#ifdef XMEGA
#ifdef ORANGE_TX
if((USARTC0.STATUS & 0x1C)==0) // Check frame error, data overrun and parity error
#elif defined STM32_BOARD
if((USART2_BASE->SR & USART_SR_RXNE) && (USART2_BASE->SR &0x0F)==0)
#else
UCSR0B &= ~_BV(RXCIE0) ; // RX interrupt disable
sei() ;
@ -1078,11 +1186,18 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
rx_buff[0]=UDR0;
if((rx_buff[0]&0xFE)==0x54) // If 1st byte is 0x54 or 0x55 it looks ok
{
TX_RX_PAUSE_on;
tx_pause();
OCR1B = TCNT1+(6500L) ; // Full message should be received within timer of 3250us
TIFR1 = OCF1B_bm ; // clear OCR1B match flag
SET_TIMSK1_OCIE1B ; // enable interrupt on compare B match
#if defined STM32_BOARD
uint16_t OCR1B;
OCR1B =TCNT1+(6500L);
timer.setCompare(TIMER_CH2,OCR1B);
timer.attachCompare2Interrupt(ISR_COMPB);
#else
TX_RX_PAUSE_on;
tx_pause();
OCR1B = TCNT1+(6500L) ; // Full message should be received within timer of 3250us
TIFR1 = OCF1B_bm ; // clear OCR1B match flag
SET_TIMSK1_OCIE1B ; // enable interrupt on compare B match
#endif
idx++;
}
}
@ -1109,52 +1224,62 @@ static uint32_t random_id(uint16_t adress, uint8_t create_new)
}
if(discard_frame==1)
{
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
TX_RX_PAUSE_off;
tx_resume();
#ifdef STM32_BOARD
detachInterrupt(2); // Disable interrupt on ch2
#else
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
TX_RX_PAUSE_off;
tx_resume();
#endif
}
#ifndef XMEGA
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
cli() ;
UCSR0B |= _BV(RXCIE0) ; // RX interrupt enable
#endif
}
//Serial timer
#ifdef XMEGA
#ifdef ORANGE_TX
ISR(TCC1_CCB_vect)
#elif defined STM32_BOARD
void ISR_COMPB()
#else
ISR(TIMER1_COMPB_vect, ISR_NOBLOCK )
#endif
{ // Timer1 compare B interrupt
discard_frame=1;
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
tx_resume();
#ifdef STM32_BOARD
detachInterrupt(2); // Disable interrupt on ch2
#else
CLR_TIMSK1_OCIE1B; // Disable interrupt on compare B match
tx_resume();
#endif
}
#endif //ENABLE_SERIAL
#ifndef XMEGA
// Random interrupt service routine called every time the WDT interrupt is triggered.
// It is only enabled at startup to generate a seed.
ISR(WDT_vect)
{
static uint8_t gWDT_buffer_position=0;
#define gWDT_buffer_SIZE 32
static uint8_t gWDT_buffer[gWDT_buffer_SIZE];
gWDT_buffer[gWDT_buffer_position] = TCNT1L; // Record the Timer 1 low byte (only one needed)
gWDT_buffer_position++; // every time the WDT interrupt is triggered
if (gWDT_buffer_position >= gWDT_buffer_SIZE)
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
// Random interrupt service routine called every time the WDT interrupt is triggered.
// It is only enabled at startup to generate a seed.
ISR(WDT_vect)
{
// The following code is an implementation of Jenkin's one at a time hash
for(uint8_t gWDT_loop_counter = 0; gWDT_loop_counter < gWDT_buffer_SIZE; ++gWDT_loop_counter)
static uint8_t gWDT_buffer_position=0;
#define gWDT_buffer_SIZE 32
static uint8_t gWDT_buffer[gWDT_buffer_SIZE];
gWDT_buffer[gWDT_buffer_position] = TCNT1L; // Record the Timer 1 low byte (only one needed)
gWDT_buffer_position++; // every time the WDT interrupt is triggered
if (gWDT_buffer_position >= gWDT_buffer_SIZE)
{
gWDT_entropy += gWDT_buffer[gWDT_loop_counter];
gWDT_entropy += (gWDT_entropy << 10);
gWDT_entropy ^= (gWDT_entropy >> 6);
// The following code is an implementation of Jenkin's one at a time hash
for(uint8_t gWDT_loop_counter = 0; gWDT_loop_counter < gWDT_buffer_SIZE; ++gWDT_loop_counter)
{
gWDT_entropy += gWDT_buffer[gWDT_loop_counter];
gWDT_entropy += (gWDT_entropy << 10);
gWDT_entropy ^= (gWDT_entropy >> 6);
}
gWDT_entropy += (gWDT_entropy << 3);
gWDT_entropy ^= (gWDT_entropy >> 11);
gWDT_entropy += (gWDT_entropy << 15);
WDTCSR = 0; // Disable Watchdog interrupt
}
gWDT_entropy += (gWDT_entropy << 3);
gWDT_entropy ^= (gWDT_entropy >> 11);
gWDT_entropy += (gWDT_entropy << 15);
WDTCSR = 0; // Disable Watchdog interrupt
}
}
#endif

10
Multiprotocol/NRF24l01_SPI.ino
View File

@ -14,9 +14,7 @@
*/
//---------------------------
// AVR nrf chip bitbang SPI functions
//---------------------------
#ifdef NRF24L01_INSTALLED
#include "iface_nrf24l01.h"
@ -189,7 +187,8 @@ void NRF24L01_SetTxRxMode(enum TXRX_State mode)
NRF_CE_on;
}
else
if (mode == RX_EN) {
if (mode == RX_EN)
{
NRF_CE_off;
NRF24L01_WriteReg(NRF24L01_07_STATUS, 0x70); // reset the flag(s)
NRF24L01_WriteReg(NRF24L01_00_CONFIG, 0x0F); // switch to RX mode
@ -335,7 +334,7 @@ void XN297_Configure(uint8_t flags)
NRF24L01_WriteReg(NRF24L01_00_CONFIG, flags & 0xFF);
}
void XN297_SetScrambledMode(const u8 mode)
void XN297_SetScrambledMode(const uint8_t mode)
{
xn297_scramble_enabled = mode;
}
@ -591,3 +590,4 @@ void LT8900_WritePayload(uint8_t* msg, uint8_t len)
NRF24L01_WritePayload(LT8900_buffer+LT8900_buffer_start,pos_final+pos-LT8900_buffer_start);
}
// End of LT8900 emulation
#endif

9
Multiprotocol/Nrf24l01_hm830.ino
View File

@ -1,10 +1,11 @@
/*
This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Deviation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with Deviation. If not, see <http://www.gnu.org/licenses/>.
This project is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
Deviation is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with Deviation. If not, see <http://www.gnu.org/licenses/>.
*/
/* This protocol is for the HM Hobby HM830 RC Paper Airplane
/*
This protocol is for the HM Hobby HM830 RC Paper Airplane
Protocol spec:
Channel data:
AA BB CC DD EE FF GG

511
Multiprotocol/Pins.h
View File

@ -15,195 +15,338 @@
//*******************
//*** Pinouts ***
//*******************
#ifndef STM32_BOARD
// TX
#define SERIAL_TX_pin 1 //PD1
#define SERIAL_TX_port PORTD
#define SERIAL_TX_ddr DDRD
#define SERIAL_TX_output SERIAL_TX_ddr |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_on SERIAL_TX_port |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_off SERIAL_TX_port &= ~_BV(SERIAL_TX_pin)
#ifdef DEBUG_TX
#define DEBUG_TX_on SERIAL_TX_on
#define DEBUG_TX_off SERIAL_TX_off
#define DEBUG_TX_toggle SERIAL_TX_port ^= _BV(SERIAL_TX_pin)
#else
#define DEBUG_TX_on
#define DEBUG_TX_off
#define DEBUG_TX_toggle
#endif
// TX
#define SERIAL_TX_pin 1 //PD1
#define SERIAL_TX_port PORTD
#define SERIAL_TX_ddr DDRD
#define SERIAL_TX_output SERIAL_TX_ddr |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_on SERIAL_TX_port |= _BV(SERIAL_TX_pin)
#define SERIAL_TX_off SERIAL_TX_port &= ~_BV(SERIAL_TX_pin)
#ifdef DEBUG_TX
#define DEBUG_TX_on SERIAL_TX_ON
#define DEBUG_TX_off SERIAL_TX_OFF
#define DEBUG_TX_toggle SERIAL_TX_port ^= _BV(SERIAL_TX_pin)
#else
#define DEBUG_TX_on
#define DEBUG_TX_off
#define DEBUG_TX_toggle
// Dial
#define MODE_DIAL1_pin 2
#define MODE_DIAL1_port PORTB
#define MODE_DIAL1_ipr PINB
#define MODE_DIAL2_pin 3
#define MODE_DIAL2_port PORTB
#define MODE_DIAL2_ipr PINB
#define MODE_DIAL3_pin 4
#define MODE_DIAL3_port PORTB
#define MODE_DIAL3_ipr PINB
#define MODE_DIAL4_pin 0
#define MODE_DIAL4_port PORTC
#define MODE_DIAL4_ipr PINC
// PPM
#define PPM_pin 3 //D3 = PD3
#define PPM_port PORTD
// SDIO
#define SDI_pin 5 //D5 = PD5
#define SDI_port PORTD
#define SDI_ipr PIND
#define SDI_ddr DDRD
#ifdef ORANGE_TX
#define SDI_on SDI_port.OUTSET = _BV(SDI_pin)
#define SDI_off SDI_port.OUTCLR = _BV(SDI_pin)
#else
#define SDI_on SDI_port |= _BV(SDI_pin)
#define SDI_off SDI_port &= ~_BV(SDI_pin)
#define SDI_1 (SDI_ipr & _BV(SDI_pin))
#define SDI_0 (SDI_ipr & _BV(SDI_pin)) == 0x00
#endif
#define SDI_input SDI_ddr &= ~_BV(SDI_pin)
#define SDI_output SDI_ddr |= _BV(SDI_pin)
//SDO
#define SDO_pin 6 //D6 = PD6
#define SDO_port PORTD
#define SDO_ipr PIND
#ifdef ORANGE_TX
#define SDO_1 (SDO_port.IN & _BV(SDO_pin))
#define SDO_0 (SDO_port.IN & _BV(SDO_pin)) == 0x00
#else
#define SDO_1 (SDO_ipr & _BV(SDO_pin))
#define SDO_0 (SDO_ipr & _BV(SDO_pin)) == 0x00
#endif
// SCLK
#define SCLK_port PORTD
#define SCLK_ddr DDRD
#ifdef ORANGE_TX
#define SCLK_pin 7 //PD7
#define SCLK_on SCLK_port.OUTSET = _BV(SCLK_pin)
#define SCLK_off SCLK_port.OUTCLR = _BV(SCLK_pin)
#else
#define SCLK_pin 4 //D4 = PD4
#define SCLK_output SCLK_ddr |= _BV(SCLK_pin)
#define SCLK_on SCLK_port |= _BV(SCLK_pin)
#define SCLK_off SCLK_port &= ~_BV(SCLK_pin)
#endif
// A7105
#define A7105_CSN_pin 2 //D2 = PD2
#define A7105_CSN_port PORTD
#define A7105_CSN_ddr DDRD
#define A7105_CSN_output A7105_CSN_ddr |= _BV(A7105_CSN_pin)
#define A7105_CSN_on A7105_CSN_port |= _BV(A7105_CSN_pin)
#define A7105_CSN_off A7105_CSN_port &= ~_BV(A7105_CSN_pin)
// CC2500
#define CC25_CSN_pin 7 //D7 = PD7
#define CC25_CSN_port PORTD
#define CC25_CSN_ddr DDRD
#define CC25_CSN_output CC25_CSN_ddr |= _BV(CC25_CSN_pin)
#define CC25_CSN_on CC25_CSN_port |= _BV(CC25_CSN_pin)
#define CC25_CSN_off CC25_CSN_port &= ~_BV(CC25_CSN_pin)
// NRF24L01
#define NRF_CSN_pin 0 //D8 = PB0
#define NRF_CSN_port PORTB
#define NRF_CSN_ddr DDRB
#define NRF_CSN_output NRF_CSN_ddr |= _BV(NRF_CSN_pin)
#define NRF_CSN_on NRF_CSN_port |= _BV(NRF_CSN_pin)
#define NRF_CSN_off NRF_CSN_port &= ~_BV(NRF_CSN_pin)
#define NRF_CE_on
#define NRF_CE_off
// CYRF6936
#ifdef ORANGE_TX
#define CYRF_CSN_pin 4 //PD4
#define CYRF_CSN_port PORTD
#define CYRF_CSN_ddr DDRD
#define CYRF_CSN_on CYRF_CSN_port.OUTSET = _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port.OUTCLR = _BV(CYRF_CSN_pin)
#define CYRF_RST_pin 0 //PE0
#define CYRF_RST_port PORTE
#define CYRF_RST_ddr DDRE
#define CYRF_RST_HI CYRF_RST_port.OUTSET = _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port.OUTCLR = _BV(CYRF_RST_pin)
#else
#define CYRF_CSN_pin 1 //D9 = PB1
#define CYRF_CSN_port PORTB
#define CYRF_CSN_ddr DDRB
#define CYRF_CSN_output CYRF_CSN_ddr |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_on CYRF_CSN_port |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port &= ~_BV(CYRF_CSN_pin)
#define CYRF_RST_pin 5 //A5 = PC5
#define CYRF_RST_port PORTC
#define CYRF_RST_ddr DDRC
#define CYRF_RST_output CYRF_RST_ddr |= _BV(CYRF_RST_pin)
#define CYRF_RST_HI CYRF_RST_port |= _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port &= ~_BV(CYRF_RST_pin)
#endif
//RF Switch
#ifdef ORANGE_TX
#define PE1_on
#define PE1_off
#define PE2_on
#define PE2_off
#else
#define PE1_pin 1 //A1 = PC1
#define PE1_port PORTC
#define PE1_ddr DDRC
#define PE1_output PE1_ddr |= _BV(PE1_pin)
#define PE1_on PE1_port |= _BV(PE1_pin)
#define PE1_off PE1_port &= ~_BV(PE1_pin)
#define PE2_pin 2 //A2 = PC2
#define PE2_port PORTC
#define PE2_ddr DDRC
#define PE2_output PE2_ddr |= _BV(PE2_pin)
#define PE2_on PE2_port |= _BV(PE2_pin)
#define PE2_off PE2_port &= ~_BV(PE2_pin)
#endif
// LED
#ifdef ORANGE_TX
#define LED_pin 1 //PD1
#define LED_port PORTD
#define LED_ddr DDRD
#define LED_on LED_port.OUTCLR = _BV(LED_pin)
#define LED_off LED_port.OUTSET = _BV(LED_pin)
#define LED_toggle LED_port.OUTTGL = _BV(LED_pin)
#define LED_output LED_port.DIRSET = _BV(LED_pin)
#define IS_LED_on (LED_port.OUT & _BV(LED_pin))
#else
#define LED_pin 5 //D13 = PB5
#define LED_port PORTB
#define LED_ddr DDRB
#define LED_on LED_port |= _BV(LED_pin)
#define LED_off LED_port &= ~_BV(LED_pin)
#define LED_toggle LED_port ^= _BV(LED_pin)
#define LED_output LED_ddr |= _BV(LED_pin)
#define IS_LED_on (LED_port & _BV(LED_pin))
#endif
//BIND
#ifdef ORANGE_TX
#define BIND_pin 2 //PD2
#define BIND_port PORTD
#define IS_BIND_BUTTON_on ( (BIND_port.IN & _BV(BIND_pin)) == 0x00 )
#else
#define BIND_pin 5 //D13 = PB5
#define BIND_port PORTB
#define BIND_ipr PINB
#define BIND_ddr DDRB
#define BIND_SET_INPUT BIND_ddr &= ~_BV(BIND_pin)
#define BIND_SET_OUTPUT BIND_ddr |= _BV(BIND_pin)
#define BIND_SET_PULLUP BIND_port |= _BV(BIND_pin)
#define IS_BIND_BUTTON_on ( (BIND_ipr & _BV(BIND_pin)) == 0x00 )
#endif
#else //STM32_BOARD
#define BIND_pin PA0
#define LED_pin PA1
//
#define PPM_pin PA8 //PPM 5V tolerant
//
#define S1_pin PA4 //Dial switch pins
#define S2_pin PA5
#define S3_pin PA6
#define S4_pin PA7
//
#define PE1_pin PB4 //PE1
#define PE2_pin PB5 //PE2
//CS pins
#define CC25_CSN_pin PB6 //CC2500
#define NRF_CSN_pin PB7 //NRF24L01
#define CYRF_RST_pin PB8 //CYRF RESET
#define A7105_CSN_pin PB9 //A7105
#define CYRF_CSN_pin PB12 //CYRF CSN
//SPI pins
#define SCK_pin PB13 //SCK
#define SDO_pin PB14 //MISO
#define SDI_pin PB15 //MOSI
//
#define TX_INV_pin PB3
#define RX_INV_pin PB1
//
#define PE1_on digitalWrite(PE1_pin,HIGH)
#define PE1_off digitalWrite(PE1_pin,LOW)
//
#define PE2_on digitalWrite(PE2_pin,HIGH)
#define PE2_off digitalWrite(PE2_pin,LOW)
#define A7105_CSN_on digitalWrite(A7105_CSN_pin,HIGH)
#define A7105_CSN_off digitalWrite(A7105_CSN_pin,LOW)
#define NRF_CE_on
#define NRF_CE_off
#define SCK_on digitalWrite(SCK_pin,HIGH)
#define SCK_off digitalWrite(SCK_pin,LOW)
#define SDI_on digitalWrite(SDI_pin,HIGH)
#define SDI_off digitalWrite(SDI_pin,LOW)
#define SDI_1 (digitalRead(SDI_pin)==HIGH)
#define SDI_0 (digitalRead(SDI_pin)==LOW)
#define CC25_CSN_on digitalWrite(CC25_CSN_pin,HIGH)
#define CC25_CSN_off digitalWrite(CC25_CSN_pin,LOW)
#define NRF_CSN_on digitalWrite(NRF_CSN_pin,HIGH)
#define NRF_CSN_off digitalWrite(NRF_CSN_pin,LOW)
#define CYRF_CSN_on digitalWrite(CYRF_CSN_pin,HIGH)
#define CYRF_CSN_off digitalWrite(CYRF_CSN_pin,LOW)
#define CYRF_RST_HI digitalWrite(CYRF_RST_pin,HIGH) //reset cyrf
#define CYRF_RST_LO digitalWrite(CYRF_RST_pin,LOW) //
#define SDO_1 (digitalRead(SDO_pin)==HIGH)
#define SDO_0 (digitalRead(SDO_pin)==LOW)
#define TX_INV_on digitalWrite(TX_INV_pin,HIGH)
#define TX_INV_off digitalWrite(TX_INV_pin,LOW)
#define RX_INV_on digitalWrite(RX_INV_pin,HIGH)
#define RX_INV_off digitalWrite(RX_INV_pin,LOW)
#define LED_on digitalWrite(LED_pin,HIGH)
#define LED_off digitalWrite(LED_pin,LOW)
#define LED_toggle digitalWrite(LED_pin ,!digitalRead(LED_pin))
#define LED_output pinMode(LED_pin,OUTPUT)
#define IS_LED_on ( digitalRead(LED_pin)==HIGH)
#define BIND_SET_INPUT pinMode(BIND_pin,INPUT)
#define BIND_SET_PULLUP digitalWrite(BIND_pin,HIGH)
#define BIND_SET_OUTPUT pinMode(BIND_pin,OUTPUT)
#define IS_BIND_BUTTON_on (digitalRead(BIND_pin)==LOW)
#define cli() noInterrupts()
#define sei() interrupts()
#define delayMilliseconds(x) delay(x)
//TX Pause
#undef TX_MAIN_PAUSE_off
#undef TX_MAIN_PAUSE_on
#undef IS_TX_MAIN_PAUSE_on
#undef TX_RX_PAUSE_off
#undef TX_RX_PAUSE_on
#undef IS_TX_RX_PAUSE_on
#undef IS_TX_PAUSE_on
#define TX_MAIN_PAUSE_off
#define TX_MAIN_PAUSE_on
#define IS_TX_MAIN_PAUSE_on
#define TX_RX_PAUSE_off
#define TX_RX_PAUSE_on
#define IS_TX_RX_PAUSE_on
#define IS_TX_PAUSE_on
#endif
// Dial
#define MODE_DIAL1_pin 2
#define MODE_DIAL1_port PORTB
#define MODE_DIAL1_ipr PINB
#define MODE_DIAL2_pin 3
#define MODE_DIAL2_port PORTB
#define MODE_DIAL2_ipr PINB
#define MODE_DIAL3_pin 4
#define MODE_DIAL3_port PORTB
#define MODE_DIAL3_ipr PINB
#define MODE_DIAL4_pin 0
#define MODE_DIAL4_port PORTC
#define MODE_DIAL4_ipr PINC
// PPM
#define PPM_pin 3 //D3 = PD3
#define PPM_port PORTD
// SDIO
#define SDI_pin 5 //D5 = PD5
#define SDI_port PORTD
#define SDI_ipr PIND
#define SDI_ddr DDRD
#ifdef XMEGA
#define SDI_on SDI_port.OUTSET = _BV(SDI_pin)
#define SDI_off SDI_port.OUTCLR = _BV(SDI_pin)
//*******************
//*** Timer ***
//*******************
#ifdef ORANGE_TX
#define TIFR1 TCC1.INTFLAGS
#define OCF1A_bm TC1_CCAIF_bm
#define OCR1A TCC1.CCA
#define TCNT1 TCC1.CNT
#define UDR0 USARTC0.DATA
#define OCF1B_bm TC1_CCBIF_bm
#define OCR1B TCC1.CCB
#define TIMSK1 TCC1.INTCTRLB
#define SET_TIMSK1_OCIE1B TIMSK1 = (TIMSK1 & 0xF3) | 0x04
#define CLR_TIMSK1_OCIE1B TIMSK1 &= 0xF3
#else
#define SDI_on SDI_port |= _BV(SDI_pin)
#define SDI_off SDI_port &= ~_BV(SDI_pin)
#define SDI_1 (SDI_ipr & _BV(SDI_pin))
#define SDI_0 (SDI_ipr & _BV(SDI_pin)) == 0x00
#endif
#define SDI_input SDI_ddr &= ~_BV(SDI_pin)
#define SDI_output SDI_ddr |= _BV(SDI_pin)
//SDO
#define SDO_pin 6 //D6 = PD6
#define SDO_port PORTD
#define SDO_ipr PIND
#ifdef XMEGA
#define SDO_1 (SDO_port.IN & _BV(SDO_pin))
#define SDO_0 (SDO_port.IN & _BV(SDO_pin)) == 0x00
#else
#define SDO_1 (SDO_ipr & _BV(SDO_pin))
#define SDO_0 (SDO_ipr & _BV(SDO_pin)) == 0x00
#ifdef STM32_BOARD
#define OCR1A TIMER2_BASE->CCR1
#define TCNT1 TIMER2_BASE->CNT
#define UDR0 USART2_BASE->DR
#define TIFR1 TIMER2_BASE->SR
#define OCF1A_bm TIMER_SR_CC1IF
#define UCSR0B USART2_BASE->CR1
#define RXCIE0 USART_CR1_RXNEIE_BIT
#define TXCIE0 USART_CR1_TXEIE_BIT
//#define TIFR1 TIMER2_BASE->SR
#else
#define OCF1A_bm _BV(OCF1A)
#define OCF1B_bm _BV(OCF1B)
#define SET_TIMSK1_OCIE1B TIMSK1 |= _BV(OCIE1B)
#define CLR_TIMSK1_OCIE1B TIMSK1 &=~_BV(OCIE1B)
#endif
#endif
// SCLK
#define SCLK_port PORTD
#define SCLK_ddr DDRD
#ifdef XMEGA
#define SCLK_pin 7 //PD7
#define SCLK_on SCLK_port.OUTSET = _BV(SCLK_pin)
#define SCLK_off SCLK_port.OUTCLR = _BV(SCLK_pin)
//*******************
//*** EEPROM ***
//*******************
#ifdef STM32_BOARD
#define EE_ADDR uint16
#define eeprom_write_byte EEPROM.write
#define eeprom_read_byte EEPROM.read
#else
#define SCLK_pin 4 //D4 = PD4
#define SCLK_output SCLK_ddr |= _BV(SCLK_pin)
#define SCLK_on SCLK_port |= _BV(SCLK_pin)
#define SCLK_off SCLK_port &= ~_BV(SCLK_pin)
#endif
// A7105
#define A7105_CSN_pin 2 //D2 = PD2
#define A7105_CSN_port PORTD
#define A7105_CSN_ddr DDRD
#define A7105_CSN_output A7105_CSN_ddr |= _BV(A7105_CSN_pin)
#define A7105_CSN_on A7105_CSN_port |= _BV(A7105_CSN_pin)
#define A7105_CSN_off A7105_CSN_port &= ~_BV(A7105_CSN_pin)
// CC2500
#define CC25_CSN_pin 7 //D7 = PD7
#define CC25_CSN_port PORTD
#define CC25_CSN_ddr DDRD
#define CC25_CSN_output CC25_CSN_ddr |= _BV(CC25_CSN_pin)
#define CC25_CSN_on CC25_CSN_port |= _BV(CC25_CSN_pin)
#define CC25_CSN_off CC25_CSN_port &= ~_BV(CC25_CSN_pin)
// NRF24L01
#define NRF_CSN_pin 0 //D8 = PB0
#define NRF_CSN_port PORTB
#define NRF_CSN_ddr DDRB
#define NRF_CSN_output NRF_CSN_ddr |= _BV(NRF_CSN_pin)
#define NRF_CSN_on NRF_CSN_port |= _BV(NRF_CSN_pin)
#define NRF_CSN_off NRF_CSN_port &= ~_BV(NRF_CSN_pin)
#define NRF_CE_on
#define NRF_CE_off
// CYRF6936
#ifdef XMEGA
#define CYRF_CSN_pin 4 //PD4
#define CYRF_CSN_port PORTD
#define CYRF_CSN_ddr DDRD
#define CYRF_CSN_on CYRF_CSN_port.OUTSET = _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port.OUTCLR = _BV(CYRF_CSN_pin)
#define CYRF_RST_pin 0 //PE0
#define CYRF_RST_port PORTE
#define CYRF_RST_ddr DDRE
#define CYRF_RST_HI CYRF_RST_port.OUTSET = _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port.OUTCLR = _BV(CYRF_RST_pin)
#else
#define CYRF_CSN_pin 1 //D9 = PB1
#define CYRF_CSN_port PORTB
#define CYRF_CSN_ddr DDRB
#define CYRF_CSN_output CYRF_CSN_ddr |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_on CYRF_CSN_port |= _BV(CYRF_CSN_pin)
#define CYRF_CSN_off CYRF_CSN_port &= ~_BV(CYRF_CSN_pin)
#define CYRF_RST_pin 5 //A5 = PC5
#define CYRF_RST_port PORTC
#define CYRF_RST_ddr DDRC
#define CYRF_RST_output CYRF_RST_ddr |= _BV(CYRF_RST_pin)
#define CYRF_RST_HI CYRF_RST_port |= _BV(CYRF_RST_pin)
#define CYRF_RST_LO CYRF_RST_port &= ~_BV(CYRF_RST_pin)
#endif
//RF Switch
#ifdef XMEGA
#define PE1_on
#define PE1_off
#define PE2_on
#define PE2_off
#else
#define PE1_pin 1 //A1 = PC1
#define PE1_port PORTC
#define PE1_ddr DDRC
#define PE1_output PE1_ddr |= _BV(PE1_pin)
#define PE1_on PE1_port |= _BV(PE1_pin)
#define PE1_off PE1_port &= ~_BV(PE1_pin)
#define PE2_pin 2 //A2 = PC2
#define PE2_port PORTC
#define PE2_ddr DDRC
#define PE2_output PE2_ddr |= _BV(PE2_pin)
#define PE2_on PE2_port |= _BV(PE2_pin)
#define PE2_off PE2_port &= ~_BV(PE2_pin)
#endif
// LED
#ifdef XMEGA
#define LED_pin 1 //PD1
#define LED_port PORTD
#define LED_ddr DDRD
#define LED_on LED_port.OUTCLR = _BV(LED_pin)
#define LED_off LED_port.OUTSET = _BV(LED_pin)
#define LED_toggle LED_port.OUTTGL = _BV(LED_pin)
#define LED_output LED_port.DIRSET = _BV(LED_pin)
#define IS_LED_on (LED_port.OUT & _BV(LED_pin))
#else
#define LED_pin 5 //D13 = PB5
#define LED_port PORTB
#define LED_ddr DDRB
#define LED_on LED_port |= _BV(LED_pin)
#define LED_off LED_port &= ~_BV(LED_pin)
#define LED_toggle LED_port ^= _BV(LED_pin)
#define LED_output LED_ddr |= _BV(LED_pin)
#define IS_LED_on (LED_port & _BV(LED_pin))
#endif
//BIND
#ifdef XMEGA
#define BIND_pin 2 //PD2
#define BIND_port PORTD
#define IS_BIND_BUTTON_on ( (BIND_port.IN & _BV(BIND_pin)) == 0x00 )
#else
#define BIND_pin 5 //D13 = PB5
#define BIND_port PORTB
#define BIND_ipr PINB
#define BIND_ddr DDRB
#define BIND_SET_INPUT BIND_ddr &= ~_BV(BIND_pin)
#define BIND_SET_OUTPUT BIND_ddr |= _BV(BIND_pin)
#define BIND_SET_PULLUP BIND_port |= _BV(BIND_pin)
#define IS_BIND_BUTTON_on ( (BIND_ipr & _BV(BIND_pin)) == 0x00 )
#define EE_ADDR uint8_t*
#endif

34
Multiprotocol/README.md
View File

@ -126,6 +126,22 @@ CH1|CH2|CH3|CH4
---|---|---|---
A|E|T|R
###CG023
###Sub_protocol H8_3D
Models: EAchine H8 mini 3D, JJRC H20/H22, JJRC H11D
CH5|CH6|CH7|CH8|CH9|CH10|CH11
---|---|---|---|---|---|---
FLIP|LIGTH|OPT1|OPT2|CAL|SNAPSHOT|VIDEO
JJRC H20: OPT1=Headless, OPT2=RTH
JJRC H22: OPT1=RTH, OPT2=180/360° flip mode
H8 3D: OPT1=RTH then press a direction to enter headless mode (like stock TX), OPT2=switch 180/360° flip mode
CAL: calibrate accelerometers
###ESKY150
Autobind
@ -159,6 +175,9 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
---|---|---|---|---|---|---|---
A|E|T|R|CH5|CH6|CH7|CH8
###HISKY
####Sub_protocol HK310
###HM830
Modele: HM Hobby HM830 RC Paper Airplane
@ -226,5 +245,20 @@ A|E|T|R|FLIP 360|FLIP|VIDEO|LED|MODE 2
####Sub_protocol U839_2014
Same channels assignement as above.
###V2X2
####Sub_protocol V2X2
Models: WLToys V202/252/272, JXD 385/388, JJRC H6C, Yizhan Tarantula X6 ...
CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
---|---|---|---|---|---|---|---|---|----|----
A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS|MAG_CAL_X|MAG_CAL_Y
PICTURE: also automatic Missile Launcher and Hoist in one direction
VIDEO: also Sprayer, Bubbler, Missile Launcher(1), and Hoist in the other dir
####Sub_protocol JXD-506
CH10|CH11|CH12
----|----|----
ARM|EMERGENCY|PAN CAMERA
###D'autres à venir

195
Multiprotocol/SPI.ino
View File

@ -15,72 +15,145 @@
/********************/
/** SPI routines **/
/********************/
#ifdef XMEGA
#define XNOP() NOP()
#ifdef STM32_BOARD
SPIClass SPI_2(2); //Create an instance of the SPI Class called SPI_2 that uses the 2nd SPI Port
void initSPI2()
{
//SPI_DISABLE();
SPI_2.end();
SPI2_BASE->CR1 &= ~SPI_CR1_DFF_8_BIT; //8 bits format This bit should be written only when SPI is disabled (SPE = ?0?) for correct operation.
SPI_2.begin(); //Initialize the SPI_2 port.
SPI_2.setBitOrder(MSBFIRST); // Set the SPI_2 bit order
SPI_2.setDataMode(SPI_MODE0); // Set the SPI_2 data mode 0
SPI_2.setClockDivider(SPI_CLOCK_DIV8); // Set the speed (36 / 8 = 4.5 MHz SPI_2 speed)
}
void SPI_Write(uint8_t command)
{//working OK
SPI2_BASE->DR = command; //Write the first data item to be transmitted into the SPI_DR register (this clears the TXE flag).
while (!(SPI2_BASE->SR & SPI_SR_RXNE));
command = SPI2_BASE->DR; // ... and read the last received data.
}
uint8_t SPI_Read(void)
{
SPI_Write(0x00);
return SPI2_BASE->DR;
}
uint8_t SPI_SDI_Read()
{
uint8_t rx=0;
cli(); //Fix Hubsan droputs??
while(!(SPI2_BASE->SR & SPI_SR_TXE));
while((SPI2_BASE->SR & SPI_SR_BSY));
//
SPI_DISABLE();
SPI_SET_BIDIRECTIONAL();
volatile uint8_t x = SPI2_BASE->DR;
(void)x;
SPI_ENABLE();
//
SPI_DISABLE();
while(!(SPI2_BASE->SR& SPI_SR_RXNE));
rx=SPI2_BASE->DR;
SPI_SET_UNIDIRECTIONAL();
SPI_ENABLE();
sei();//fix Hubsan dropouts??
return rx;
}
void SPI_ENABLE()
{
SPI2_BASE->CR1 |= SPI_CR1_SPE;
}
void SPI_DISABLE()
{
SPI2_BASE->CR1 &= ~SPI_CR1_SPE;
}
void SPI_SET_BIDIRECTIONAL()
{
SPI2_BASE->CR1 |= SPI_CR1_BIDIMODE;
SPI2_BASE->CR1 &= ~ SPI_CR1_BIDIOE;//receive only
}
void SPI_SET_UNIDIRECTIONAL()
{
SPI2_BASE->CR1 &= ~SPI_CR1_BIDIMODE;
}
#else
#define XNOP()
#endif
#ifdef ORANGE_TX
#define XNOP() NOP()
#else
#define XNOP()
#endif
void SPI_Write(uint8_t command)
{
uint8_t n=8;
SCLK_off;//SCK start low
XNOP();
SDI_off;
XNOP();
do
void SPI_Write(uint8_t command)
{
if(command&0x80)
SDI_on;
else
SDI_off;
XNOP();
SCLK_on;
XNOP();
XNOP();
command = command << 1;
SCLK_off;
XNOP();
}
while(--n) ;
SDI_on;
}
uint8_t n=8;
uint8_t SPI_Read(void)
{
uint8_t result=0,i;
for(i=0;i<8;i++)
SCLK_off;//SCK start low
XNOP();
SDI_off;
XNOP();
do
{
if(command&0x80)
SDI_on;
else
SDI_off;
XNOP();
SCLK_on;
XNOP();
XNOP();
command = command << 1;
SCLK_off;
XNOP();
}
while(--n) ;
SDI_on;
}
uint8_t SPI_Read(void)
{
result=result<<1;
if(SDO_1)
result |= 0x01;
SCLK_on;
XNOP();
XNOP();
NOP();
SCLK_off;
XNOP();
XNOP();
uint8_t result=0,i;
for(i=0;i<8;i++)
{
result=result<<1;
if(SDO_1)
result |= 0x01;
SCLK_on;
XNOP();
XNOP();
NOP();
SCLK_off;
XNOP();
XNOP();
}
return result;
}
return result;
}
#ifdef A7105_INSTALLED
uint8_t SPI_SDIO_Read(void)
{
uint8_t result=0;
SDI_input;
for(uint8_t i=0;i<8;i++)
{
result=result<<1;
if(SDI_1) ///if SDIO =1
result |= 0x01;
SCLK_on;
NOP();
SCLK_off;
#ifdef A7105_INSTALLED
uint8_t SPI_SDI_Read(void)
{
uint8_t result=0;
SDI_input;
for(uint8_t i=0;i<8;i++)
{
result=result<<1;
if(SDI_1) ///if SDIO =1
result |= 0x01;
SCLK_on;
NOP();
SCLK_off;
}
SDI_output;
return result;
}
SDI_output;
return result;
}
#endif
#endif
#endif//STM32_BOARD

240
Multiprotocol/TX_Def.h
View File

@ -60,199 +60,151 @@
//Channel definitions
#ifdef AETR
enum {
AILERON =0,
ELEVATOR,
THROTTLE,
RUDDER,
};
#define AILERON 0
#define ELEVATOR 1
#define THROTTLE 2
#define RUDDER 3
#endif
#ifdef AERT
enum {
AILERON =0,
ELEVATOR,
RUDDER,
THROTTLE,
};
#define AILERON 0
#define ELEVATOR 1
#define THROTTLE 3
#define RUDDER 2
#endif
#ifdef ARET
enum {
AILERON =0,
RUDDER,
ELEVATOR,
THROTTLE,
};
#define AILERON 0
#define ELEVATOR 2
#define THROTTLE 3
#define RUDDER 1
#endif
#ifdef ARTE
enum {
AILERON =0,
RUDDER,
THROTTLE,
ELEVATOR,
};
#define AILERON 0
#define ELEVATOR 3
#define THROTTLE 2
#define RUDDER 1
#endif
#ifdef ATRE
enum {
AILERON =0,
THROTTLE,
RUDDER,
ELEVATOR,
};
#define AILERON 0
#define ELEVATOR 3
#define THROTTLE 1
#define RUDDER 2
#endif
#ifdef ATER
enum {
AILERON =0,
THROTTLE,
ELEVATOR,
RUDDER,
};
#define AILERON 0
#define ELEVATOR 2
#define THROTTLE 1
#define RUDDER 3
#endif
#ifdef EATR
enum {
ELEVATOR =0,
AILERON,
THROTTLE,
RUDDER,
};
#define AILERON 1
#define ELEVATOR 0
#define THROTTLE 2
#define RUDDER 3
#endif
#ifdef EART
enum {
ELEVATOR =0,
AILERON,
RUDDER,
THROTTLE,
};
#define AILERON 1
#define ELEVATOR 0
#define THROTTLE 3
#define RUDDER 2
#endif
#ifdef ERAT
enum {
ELEVATOR =0,
RUDDER,
AILERON,
THROTTLE,
};
#define AILERON 2
#define ELEVATOR 0
#define THROTTLE 3
#define RUDDER 1
#endif
#ifdef ERTA
enum {
ELEVATOR =0,
RUDDER,
THROTTLE,
AILERON,
};
#define AILERON 3
#define ELEVATOR 0
#define THROTTLE 2
#define RUDDER 1
#endif
#ifdef ETRA
enum {
ELEVATOR =0,
THROTTLE,
RUDDER,
AILERON,
};
#define AILERON 3
#define ELEVATOR 0
#define THROTTLE 1
#define RUDDER 2
#endif
#ifdef ETAR
enum {
ELEVATOR =0,
THROTTLE,
AILERON,
RUDDER,
};
#define AILERON 2
#define ELEVATOR 0
#define THROTTLE 1
#define RUDDER 3
#endif
#ifdef TEAR
enum {
THROTTLE =0,
ELEVATOR,
AILERON,
RUDDER,
};
#define AILERON 2
#define ELEVATOR 1
#define THROTTLE 0
#define RUDDER 3
#endif
#ifdef TERA
enum {
THROTTLE =0,
ELEVATOR,
RUDDER,
AILERON,
};
#define AILERON 3
#define ELEVATOR 1
#define THROTTLE 0
#define RUDDER 2
#endif
#ifdef TREA
enum {
THROTTLE =0,
RUDDER,
ELEVATOR,
AILERON,
};
#define AILERON 3
#define ELEVATOR 2
#define THROTTLE 0
#define RUDDER 1
#endif
#ifdef TRAE
enum {
THROTTLE =0,
RUDDER,
AILERON,
ELEVATOR,
};
#define AILERON 2
#define ELEVATOR 3
#define THROTTLE 0
#define RUDDER 1
#endif
#ifdef TARE
enum {
THROTTLE =0,
AILERON,
RUDDER,
ELEVATOR,
};
#define AILERON 1
#define ELEVATOR 3
#define THROTTLE 0
#define RUDDER 2
#endif
#ifdef TAER
enum {
THROTTLE =0,
AILERON,
ELEVATOR,
RUDDER,
};
#define AILERON 1
#define ELEVATOR 2
#define THROTTLE 0
#define RUDDER 3
#endif
#ifdef RETA
enum {
RUDDER =0,
ELEVATOR,
THROTTLE,
AILERON,
};
#define AILERON 3
#define ELEVATOR 1
#define THROTTLE 2
#define RUDDER 0
#endif
#ifdef REAT
enum {
RUDDER =0,
ELEVATOR,
AILERON,
THROTTLE,
};
#define AILERON 2
#define ELEVATOR 1
#define THROTTLE 3
#define RUDDER 0
#endif
#ifdef RAET
enum {
RUDDER =0,
AILERON,
ELEVATOR,
THROTTLE,
};
#define AILERON 1
#define ELEVATOR 2
#define THROTTLE 3
#define RUDDER 0
#endif
#ifdef RATE
enum {
RUDDER =0,
AILERON,
THROTTLE,
ELEVATOR,
};
#define AILERON 1
#define ELEVATOR 3
#define THROTTLE 2
#define RUDDER 0
#endif
#ifdef RTAE
enum {
RUDDER =0,
THROTTLE,
AILERON,
ELEVATOR,
};
#define AILERON 2
#define ELEVATOR 3
#define THROTTLE 1
#define RUDDER 0
#endif
#ifdef RTEA
enum {
RUDDER =0,
THROTTLE,
ELEVATOR,
AILERON,
};
#define AILERON 3
#define ELEVATOR 2
#define THROTTLE 1
#define RUDDER 0
#endif
#define AUX1 4

709
Multiprotocol/Telemetry.ino
View File

@ -38,7 +38,7 @@
#define MAX_PKTX 10
uint8_t pktx[MAX_PKTX];
uint8_t pktx1[MAX_PKTX];
uint8_t index;
uint8_t indx;
uint8_t frame[18];
#ifdef BASH_SERIAL
@ -94,6 +94,7 @@ void frsky_check_telemetry(uint8_t *pkt,uint8_t len)
for (uint8_t i=3;i<len;i++)
pktt[i]=pkt[i];
telemetry_link=1;
telemetry_lost=0;
if(pktt[6])
telemetry_counter=(telemetry_counter+1)%32;
//
@ -172,28 +173,28 @@ void frsky_user_frame()
pass=1;
case 1:
index=indexx;
indx=indexx;
prev_index = indexx;
if(index<USER_MAX_BYTES)
if(indx<USER_MAX_BYTES)
{
for(i=0;i<index;i++)
for(i=0;i<indx;i++)
frame[i+3]=pktx[i];
pktt[6]=0;
pass=0;
}
else
{
index = USER_MAX_BYTES;
for(i=0;i<index;i++)
indx = USER_MAX_BYTES;
for(i=0;i<indx;i++)
frame[i+3]=pktx[i];
pass=2;
}
break;
case 2:
index = prev_index - index;
indx = prev_index - indx;
prev_index=0;
if(index<=(MAX_PKTX-USER_MAX_BYTES)) //10-6=4
for(i=0;i<index;i++)
if(indx<=(MAX_PKTX-USER_MAX_BYTES)) //10-6=4
for(i=0;i<indx;i++)
frame[i+3]=pktx[USER_MAX_BYTES+i];
pass=0;
pktt[6]=0;
@ -201,9 +202,9 @@ void frsky_user_frame()
default:
break;
}
if(!index)
if(!indx)
return;
frame[1] = index;
frame[1] = indx;
frskySendStuffed();
}
else
@ -311,7 +312,11 @@ void sportSendFrame()
{
uint8_t i;
sport_counter = (sport_counter + 1) %36;
if(telemetry_lost)
{
sportIdle();
return;
}
if(sport_counter<6)
{
frame[0] = 0x98;
@ -362,30 +367,30 @@ void proces_sport_data(uint8_t data)
case 0:
if (data == START_STOP)
{//waiting for 0x7e
index = 0;
indx = 0;
pass = 1;
}
break;
case 1:
if (data == START_STOP) // Happens if missed packet
{//waiting for 0x7e
index = 0;
indx = 0;
pass = 1;
break;
}
if(data == BYTESTUFF)//if they are stuffed
pass=2;
else
if (index < MAX_PKTX)
pktx[index++] = data;
if (indx < MAX_PKTX)
pktx[indx++] = data;
break;
case 2:
if (index < MAX_PKTX)
pktx[index++] = data ^ STUFF_MASK; //unstuff bytes
if (indx < MAX_PKTX)
pktx[indx++] = data ^ STUFF_MASK; //unstuff bytes
pass=1;
break;
} // end switch
if (index >= FRSKY_SPORT_PACKET_SIZE)
if (indx >= FRSKY_SPORT_PACKET_SIZE)
{//8 bytes no crc
if ( sport )
{
@ -408,22 +413,6 @@ void proces_sport_data(uint8_t data)
void TelemetryUpdate()
{
#if defined SPORT_TELEMETRY
if (protocol==MODE_FRSKYX)
{ // FrSkyX
if(telemetry_link)
{
if(pktt[4] & 0x80)
rssi=pktt[4] & 0x7F ;
else
RxBt = (pktt[4]<<1) + 1 ;
for (uint8_t i=0; i < pktt[6]; i++)
proces_sport_data(pktt[7+i]);
telemetry_link=0;
}
}
#endif
// check for space in tx buffer
#ifdef BASH_SERIAL
@ -463,6 +452,33 @@ void TelemetryUpdate()
}
#endif
#if defined SPORT_TELEMETRY
if (protocol==MODE_FRSKYX)
{ // FrSkyX
if(telemetry_link)
{
if(pktt[4] & 0x80)
rssi=pktt[4] & 0x7F ;
else
RxBt = (pktt[4]<<1) + 1 ;
if(pktt[6]<=6)
for (uint8_t i=0; i < pktt[6]; i++)
proces_sport_data(pktt[7+i]);
telemetry_link=0;
}
uint32_t now = micros();
if ((now - last) > SPORT_TIME)
{
sportSendFrame();
#ifdef STM32_BOARD
last=now;
#else
last += SPORT_TIME ;
#endif
}
}
#endif
#if defined DSM_TELEMETRY
if(telemetry_link && protocol == MODE_DSM )
{ // DSM
@ -484,17 +500,6 @@ void TelemetryUpdate()
return;
}
#endif
#if defined SPORT_TELEMETRY
if (protocol==MODE_FRSKYX)
{ // FrSkyX
uint32_t now = micros();
if ((now - last) > SPORT_TIME)
{
sportSendFrame();
last += SPORT_TIME ;
}
}
#endif
}
@ -505,323 +510,361 @@ void TelemetryUpdate()
/**************************/
#ifndef BASH_SERIAL
// Routines for normal serial output
void Serial_write(uint8_t data)
{
uint8_t nextHead ;
nextHead = tx_head + 1 ;
if ( nextHead >= TXBUFFER_SIZE )
nextHead = 0 ;
tx_buff[nextHead]=data;
tx_head = nextHead ;
tx_resume();
}
void initTXSerial( uint8_t speed)
{
#ifdef ENABLE_PPM
if(speed==SPEED_9600)
{ // 9600
#ifdef XMEGA
USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;
#else
//9600 bauds
UBRR0H = 0x00;
UBRR0L = 0x67;
UCSR0A = 0 ; // Clear X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
}
else if(speed==SPEED_57600)
{ // 57600
#ifdef XMEGA
/*USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;*/
#else
//57600 bauds
UBRR0H = 0x00;
UBRR0L = 0x22;
UCSR0A = 0x02 ; // Set X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
}
else if(speed==SPEED_125K)
{ // 125000
#ifdef XMEGA
/*USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;*/
#else
//125000 bauds
UBRR0H = 0x00;
UBRR0L = 0x07;
UCSR0A = 0x00 ; // Clear X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
}
#endif
#ifndef XMEGA
UCSR0B |= (1<<TXEN0);//tx enable
#endif
}
#ifdef XMEGA
ISR(USARTC0_DRE_vect)
#else
ISR(USART_UDRE_vect)
#endif
{ // Transmit interrupt
if(tx_head!=tx_tail)
// Routines for normal serial output
void Serial_write(uint8_t data)
{
if(++tx_tail>=TXBUFFER_SIZE)//head
tx_tail=0;
UDR0=tx_buff[tx_tail];
uint8_t nextHead ;
nextHead = tx_head + 1 ;
if ( nextHead >= TXBUFFER_SIZE )
nextHead = 0 ;
tx_buff[nextHead]=data;
tx_head = nextHead ;
tx_resume();
}
if (tx_tail == tx_head)
tx_pause(); // Check if all data is transmitted . if yes disable transmitter UDRE interrupt
}
void initTXSerial( uint8_t speed)
{
#ifdef ENABLE_PPM
if(speed==SPEED_9600)
{ // 9600
#ifdef ORANGE_TX
USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;
#else
#ifdef STM32_BOARD
Serial2.begin(9600); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
UBRR0L = 0x67;
UCSR0A = 0 ; // Clear X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
#endif
}
else if(speed==SPEED_57600)
{ // 57600
#ifdef ORANGE_TX
/*USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;*/
#else
#ifdef STM32_BOARD
Serial2.begin(57600); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
UBRR0L = 0x22;
UCSR0A = 0x02 ; // Set X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
#endif
}
else if(speed==SPEED_125K)
{ // 125000
#ifdef ORANGE_TX
/*USARTC0.BAUDCTRLA = 207 ;
USARTC0.BAUDCTRLB = 0 ;
USARTC0.CTRLB = 0x18 ;
USARTC0.CTRLA = (USARTC0.CTRLA & 0xCF) | 0x10 ;
USARTC0.CTRLC = 0x03 ;*/
#else
#ifdef STM32_BOARD
Serial2.begin(125000); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
UBRR0L = 0x07;
UCSR0A = 0x00 ; // Clear X2 bit
//Set frame format to 8 data bits, none, 1 stop bit
UCSR0C = (1<<UCSZ01)|(1<<UCSZ00);
#endif
#endif
}
#endif
#ifndef ORANGE_TX
#ifndef STM32_BOARD
UCSR0B |= (1<<TXEN0);//tx enable
#endif
#endif
}
//Serial TX
#ifdef ORANGE_TX
ISR(USARTC0_DRE_vect)
#else
#ifdef STM32_BOARD
#ifdef __cplusplus
extern "C" {
#endif
void __irq_usart3()
#else
ISR(USART_UDRE_vect)
#endif
#endif
{ // Transmit interrupt
#ifdef STM32_BOARD
if(USART3_BASE->SR & USART_SR_TXE)
{
#endif
if(tx_head!=tx_tail)
{
if(++tx_tail>=TXBUFFER_SIZE)//head
tx_tail=0;
#ifdef STM32_BOARD
USART3_BASE->DR=tx_buff[tx_tail];//clears TXE bit
#else
UDR0=tx_buff[tx_tail];
#endif
}
if (tx_tail == tx_head)
#ifdef STM32_BOARD
USART3_BASE->CR1 &= ~USART_CR1_TXEIE;//disable interrupt
}
#else
tx_pause(); // Check if all data is transmitted . if yes disable transmitter UDRE interrupt
#endif
}
#if defined STM32_BOARD
#ifdef __cplusplus
}
#endif
#endif //STM32_BOARD
#else //BASH_SERIAL
// Routines for bit-bashed serial output
// Routines for bit-bashed serial output
// Speed is 0 for 100K and 1 for 9600
void initTXSerial( uint8_t speed)
{
TIMSK0 = 0 ; // Stop all timer 0 interrupts
#ifdef INVERT_SERIAL
SERIAL_TX_off;
#else
SERIAL_TX_on;
#endif
UCSR0B &= ~(1<<TXEN0) ;
SerialControl.speed = speed ;
if ( speed == SPEED_9600 )
{
OCR0A = 207 ; // 104uS period
TCCR0A = 3 ;
TCCR0B = 0x0A ; // Fast PMM, 2MHz
}
else // 100K
{
TCCR0A = 0 ;
TCCR0B = 2 ; // Clock/8 (0.5uS)
}
}
void Serial_write( uint8_t byte )
{
uint8_t temp ;
uint8_t temp1 ;
uint8_t byteLo ;
// Speed is 0 for 100K and 1 for 9600
void initTXSerial( uint8_t speed)
{
TIMSK0 = 0 ; // Stop all timer 0 interrupts
#ifdef INVERT_SERIAL
SERIAL_TX_off;
#else
SERIAL_TX_on;
byte = ~byte ;
#endif
UCSR0B &= ~(1<<TXEN0) ;
SerialControl.speed = speed ;
if ( speed == SPEED_9600 )
{
OCR0A = 207 ; // 104uS period
TCCR0A = 3 ;
TCCR0B = 0x0A ; // Fast PMM, 2MHz
}
else // 100K
{
TCCR0A = 0 ;
TCCR0B = 2 ; // Clock/8 (0.5uS)
}
}
void Serial_write( uint8_t byte )
{
uint8_t temp ;
uint8_t temp1 ;
uint8_t byteLo ;
#ifdef INVERT_SERIAL
byte = ~byte ;
#endif
byteLo = byte ;
byteLo >>= 7 ; // Top bit
if ( SerialControl.speed == SPEED_100K )
{
#ifdef INVERT_SERIAL
byteLo |= 0x02 ; // Parity bit
#else
byteLo |= 0xFC ; // Stop bits
#endif
// calc parity
temp = byte ;
temp >>= 4 ;
temp = byte ^ temp ;
temp1 = temp ;
temp1 >>= 2 ;
temp = temp ^ temp1 ;
temp1 = temp ;
temp1 <<= 1 ;
temp ^= temp1 ;
temp &= 0x02 ;
#ifdef INVERT_SERIAL
byteLo ^= temp ;
#else
byteLo |= temp ;
#endif
}
else
{
byteLo |= 0xFE ; // Stop bit
}
byte <<= 1 ;
#ifdef INVERT_SERIAL
byte |= 1 ; // Start bit
#endif
uint8_t next = (SerialControl.head + 2) & 0x3f ;
if ( next != SerialControl.tail )
{
SerialControl.data[SerialControl.head] = byte ;
SerialControl.data[SerialControl.head+1] = byteLo ;
SerialControl.head = next ;
}
if(!IS_TX_PAUSE_on)
tx_resume();
}
void resumeBashSerial()
{
cli() ;
if ( SerialControl.busy == 0 )
{
sei() ;
// Start the transmission here
#ifdef INVERT_SERIAL
GPIOR2 = 0 ;
#else
GPIOR2 = 0x01 ;
#endif
byteLo = byte ;
byteLo >>= 7 ; // Top bit
if ( SerialControl.speed == SPEED_100K )
{
GPIOR1 = 1 ;
OCR0B = TCNT0 + 40 ;
OCR0A = OCR0B + 210 ;
TIFR0 = (1<<OCF0A) | (1<<OCF0B) ;
TIMSK0 |= (1<<OCIE0B) ;
SerialControl.busy = 1 ;
#ifdef INVERT_SERIAL
byteLo |= 0x02 ; // Parity bit
#else
byteLo |= 0xFC ; // Stop bits
#endif
// calc parity
temp = byte ;
temp >>= 4 ;
temp = byte ^ temp ;
temp1 = temp ;
temp1 >>= 2 ;
temp = temp ^ temp1 ;
temp1 = temp ;
temp1 <<= 1 ;
temp ^= temp1 ;
temp &= 0x02 ;
#ifdef INVERT_SERIAL
byteLo ^= temp ;
#else
byteLo |= temp ;
#endif
}
else
{
GPIOR1 = 1 ;
TIFR0 = (1<<TOV0) ;
TIMSK0 |= (1<<TOIE0) ;
SerialControl.busy = 1 ;
}
}
else
{
sei() ;
}
}
// Assume timer0 at 0.5uS clock
ISR(TIMER0_COMPA_vect)
{
uint8_t byte ;
byte = GPIOR0 ;
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
GPIOR0 = byte ;
if ( --GPIOR1 == 0 )
{
TIMSK0 &= ~(1<<OCIE0A) ;
GPIOR1 = 3 ;
}
else
{
OCR0A += 20 ;
}
}
ISR(TIMER0_COMPB_vect)
{
uint8_t byte ;
byte = GPIOR2 ;
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
GPIOR2 = byte ;
if ( --GPIOR1 == 0 )
{
if ( IS_TX_PAUSE_on )
byteLo |= 0xFE ; // Stop bit
}
byte <<= 1 ;
#ifdef INVERT_SERIAL
byte |= 1 ; // Start bit
#endif
uint8_t next = (SerialControl.head + 2) & 0x3f ;
if ( next != SerialControl.tail )
{
SerialControl.busy = 0 ;
TIMSK0 &= ~(1<<OCIE0B) ;
SerialControl.data[SerialControl.head] = byte ;
SerialControl.data[SerialControl.head+1] = byteLo ;
SerialControl.head = next ;
}
if(!IS_TX_PAUSE_on)
tx_resume();
}
void resumeBashSerial()
{
cli() ;
if ( SerialControl.busy == 0 )
{
sei() ;
// Start the transmission here
#ifdef INVERT_SERIAL
GPIOR2 = 0 ;
#else
GPIOR2 = 0x01 ;
#endif
if ( SerialControl.speed == SPEED_100K )
{
GPIOR1 = 1 ;
OCR0B = TCNT0 + 40 ;
OCR0A = OCR0B + 210 ;
TIFR0 = (1<<OCF0A) | (1<<OCF0B) ;
TIMSK0 |= (1<<OCIE0B) ;
SerialControl.busy = 1 ;
}
else
{
GPIOR1 = 1 ;
TIFR0 = (1<<TOV0) ;
TIMSK0 |= (1<<TOIE0) ;
SerialControl.busy = 1 ;
}
}
else
{
// prepare next byte and allow for 2 stop bits
sei() ;
}
}
// Assume timer0 at 0.5uS clock
ISR(TIMER0_COMPA_vect)
{
uint8_t byte ;
byte = GPIOR0 ;
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
GPIOR0 = byte ;
if ( --GPIOR1 == 0 )
{
TIMSK0 &= ~(1<<OCIE0A) ;
GPIOR1 = 3 ;
}
else
{
OCR0A += 20 ;
}
}
ISR(TIMER0_COMPB_vect)
{
uint8_t byte ;
byte = GPIOR2 ;
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
GPIOR2 = byte ;
if ( --GPIOR1 == 0 )
{
if ( IS_TX_PAUSE_on )
{
SerialControl.busy = 0 ;
TIMSK0 &= ~(1<<OCIE0B) ;
}
else
{
// prepare next byte and allow for 2 stop bits
struct t_serial_bash *ptr = &SerialControl ;
if ( ptr->head != ptr->tail )
{
GPIOR0 = ptr->data[ptr->tail] ;
GPIOR2 = ptr->data[ptr->tail+1] ;
ptr->tail = ( ptr->tail + 2 ) & 0x3F ;
GPIOR1 = 8 ;
OCR0A = OCR0B + 40 ;
OCR0B = OCR0A + 8 * 20 ;
TIMSK0 |= (1<<OCIE0A) ;
}
else
{
SerialControl.busy = 0 ;
TIMSK0 &= ~(1<<OCIE0B) ;
}
}
}
else
{
OCR0B += 20 ;
}
}
ISR(TIMER0_OVF_vect)
{
uint8_t byte ;
if ( GPIOR1 > 2 )
{
byte = GPIOR0 ;
}
else
{
byte = GPIOR2 ;
}
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
if ( GPIOR1 > 2 )
{
GPIOR0 = byte ;
}
else
{
GPIOR2 = byte ;
}
if ( --GPIOR1 == 0 )
{
// prepare next byte
struct t_serial_bash *ptr = &SerialControl ;
if ( ptr->head != ptr->tail )
{
GPIOR0 = ptr->data[ptr->tail] ;
GPIOR2 = ptr->data[ptr->tail+1] ;
ptr->tail = ( ptr->tail + 2 ) & 0x3F ;
GPIOR1 = 8 ;
OCR0A = OCR0B + 40 ;
OCR0B = OCR0A + 8 * 20 ;
TIMSK0 |= (1<<OCIE0A) ;
GPIOR1 = 10 ;
}
else
{
SerialControl.busy = 0 ;
TIMSK0 &= ~(1<<OCIE0B) ;
TIMSK0 &= ~(1<<TOIE0) ;
}
}
}
else
{
OCR0B += 20 ;
}
}
ISR(TIMER0_OVF_vect)
{
uint8_t byte ;
if ( GPIOR1 > 2 )
{
byte = GPIOR0 ;
}
else
{
byte = GPIOR2 ;
}
if ( byte & 0x01 )
SERIAL_TX_on;
else
SERIAL_TX_off;
byte /= 2 ; // Generates shorter code than byte >>= 1
if ( GPIOR1 > 2 )
{
GPIOR0 = byte ;
}
else
{
GPIOR2 = byte ;
}
if ( --GPIOR1 == 0 )
{
// prepare next byte
struct t_serial_bash *ptr = &SerialControl ;
if ( ptr->head != ptr->tail )
{
GPIOR0 = ptr->data[ptr->tail] ;
GPIOR2 = ptr->data[ptr->tail+1] ;
ptr->tail = ( ptr->tail + 2 ) & 0x3F ;
GPIOR1 = 10 ;
}
else
{
SerialControl.busy = 0 ;
TIMSK0 &= ~(1<<TOIE0) ;
}
}
}
#endif // BASH_SERIAL
#endif // TELEMETRY

38
Multiprotocol/V2X2_nrf24l01.ino
View File

@ -15,6 +15,8 @@
// compatible with WLToys V2x2, JXD JD38x, JD39x, JJRC H6C, Yizhan Tarantula X6 ...
// Last sync with hexfet new_protocols/v202_nrf24l01.c dated 2015-03-15
// ajout jdx506 : https://github.com/DeviationTX/deviation/compare/master...goebish:protocol_jxd_506
#if defined(V2X2_NRF24L01_INO)
@ -40,7 +42,12 @@ enum {
// flags going to byte 10
V2X2_FLAG_HEADLESS = 0x02,
V2X2_FLAG_MAG_CAL_X = 0x08,
V2X2_FLAG_MAG_CAL_Y = 0x20
V2X2_FLAG_MAG_CAL_Y = 0x20,
//
JXD_FLAG_START_STOP= 0x40, // arm / disarm JXD-506
JXD_FLAG_EMERGENCY = 0x80, // JXD-506
JXD_FLAG_CAMERA_UP = 0x01, // JXD-506
JXD_FLAG_CAMERA_DN = 0x02, // JXD-506
};
//
@ -182,12 +189,29 @@ static void __attribute__((unused)) V2X2_send_packet(uint8_t bind)
// Channel 9
if (Servo_AUX5)
flags2 = V2X2_FLAG_HEADLESS;
// Channel 10
if (Servo_AUX6)
flags2 |= V2X2_FLAG_MAG_CAL_X;
// Channel 11
if (Servo_AUX7)
flags2 |= V2X2_FLAG_MAG_CAL_Y;
if(sub_protocol == FORMAT_JXD506) {
// Channel 10
if (Servo_AUX6) flags2 |= JXD_FLAG_START_STOP;
// Channel 11
if (Servo_AUX7) flags2 |= JXD_FLAG_EMERGENCY;
/* // Channel 12 down
if (num_channels < 11 || Channels[CHANNEL11] >= CHAN_MIN_VALUE/2) *flags2 &= ~FLAG_CAMERA_DN;
else *flags2 |= JXD_FLAG_CAMERA_DN;
// Channel 12 up
if (num_channels < 11 || Channels[CHANNEL11] <= CHAN_MAX_VALUE/2) *flags2 &= ~FLAG_CAMERA_UP;
else *flags2 |= JXD_FLAG_CAMERA_UP;
*/
} else {
// Channel 10
if (Servo_AUX6)
flags2 |= V2X2_FLAG_MAG_CAL_X;
// Channel 11
if (Servo_AUX7)
flags2 |= V2X2_FLAG_MAG_CAL_Y;
}
}
// TX id
packet[7] = rx_tx_addr[1];

96
Multiprotocol/Validate.h Normal file
View File

@ -0,0 +1,96 @@
// Check selected board type
#if defined (STM32_BOARD) && defined (ORANGE_TX)
#error You must comment the board type STM32_BOARD in _Config.h to compile ORANGE_TX
#endif
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
//Atmega328p
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
#error You must select one of these boards: "Multi 4-in-1", "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
#if defined (STM32_BOARD) && not defined (ORANGE_TX)
//STM32
#ifndef ARDUINO_GENERIC_STM32F103C
#error You must select the board type "Generic STM32F103C series"
#endif
#endif
//Change/Force configuration if OrangeTX
#ifdef ORANGE_TX
#undef ENABLE_PPM // Disable PPM for OrangeTX module
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#endif
//Make sure protocols are selected correctly
#ifndef A7105_INSTALLED
#undef FLYSKY_A7105_INO
#undef HUBSAN_A7105_INO
#endif
#ifndef CYRF6936_INSTALLED
#undef DEVO_CYRF6936_INO
#undef DSM_CYRF6936_INO
#undef J6PRO_CYRF6936_INO
#endif
#ifndef CC2500_INSTALLED
#undef FRSKYD_CC2500_INO
#undef FRSKYV_CC2500_INO
#undef FRSKYX_CC2500_INO
#undef SFHSS_CC2500_INO
#endif
#ifndef NRF24L01_INSTALLED
#undef BAYANG_NRF24L01_INO
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
#undef ESKY_NRF24L01_INO
#undef HISKY_NRF24L01_INO
#undef KN_NRF24L01_INO
#undef SLT_NRF24L01_INO
#undef SYMAX_NRF24L01_INO
#undef V2X2_NRF24L01_INO
#undef YD717_NRF24L01_INO
#undef MT99XX_NRF24L01_INO
#undef MJXQ_NRF24L01_INO
#undef SHENQI_NRF24L01_INO
#undef FY326_NRF24L01_INO
#undef FQ777_NRF24L01_INO
#undef ASSAN_NRF24L01_INO
#undef HONTAI_NRF24L01_INO
#endif
//Make sure telemetry is selected correctly
#ifndef TELEMETRY
#undef INVERT_TELEMETRY
#undef DSM_TELEMETRY
#undef SPORT_TELEMETRY
#undef HUB_TELEMETRY
#else
#if not defined(CYRF6936_INSTALLED) || not defined(DSM_CYRF6936_INO)
#undef DSM_TELEMETRY
#endif
#if (not defined(CC2500_INSTALLED) || not defined(FRSKYD_CC2500_INO)) && (not defined(A7105_INSTALLED) || not defined(HUBSAN_A7105_INO))
#undef HUB_TELEMETRY
#endif
#if not defined(CC2500_INSTALLED) || not defined(FRSKYX_CC2500_INO)
#undef SPORT_TELEMETRY
#endif
#if not defined(DSM_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(SPORT_TELEMETRY)
#undef TELEMETRY
#undef INVERT_TELEMETRY
#endif
#endif
//Make sure TX is defined correctly
#ifndef AILERON
#error You must select a correct channel order.
#endif
#if not defined(PPM_MAX_100) || not defined(PPM_MIN_100) || not defined(PPM_MAX_125) || not defined(PPM_MIN_125)
#error You must set correct TX end points.
#endif

0
Multiprotocol/WMath.cpp.xmega → Multiprotocol/WMath.cpp.orangetx
View File

28
Multiprotocol/_Config.h
View File

@ -17,6 +17,14 @@
/** Multiprotocol module configuration file ***/
/**********************************************/
/********************/
/*** BOARD TYPE ***/
/********************/
//Uncomment one of the line below if you have a different module not based on the original Multi Atmega328p design which includes the 4-in-1.
//If you don't know then leave them commented.
//#define STM32_BOARD
/*******************/
/*** TX SETTINGS ***/
/*******************/
@ -43,7 +51,7 @@
/*** PROTOCOLS TO INCLUDE ***/
/****************************/
//In this section select the protocols you want to be accessible when using the module.
//All the protocols will not fit in the module so you need to pick and choose.
//All the protocols will not fit in the Atmega328p module so you need to pick and choose.
//Comment the protocols you are not using with "//" to save Flash space.
//The protocols below need an A7105 to be installed
@ -138,17 +146,17 @@
//Below are some standard transmitters already preconfigured.
//Uncomment only the one which matches your transmitter.
//#define TX_ER9X //ER9X/ERSKY9X/OpenTX ( 988<->2012µs)
#define TX_TARANIS //TARANIS AETR (1100<->1900µs)
//#define TX_DEVO7 //DEVO (1120<->1920µs)
//#define TX_SPEKTRUM //Spektrum (1100<->1900µs)
//#define TX_HISKY //HISKY (1100<->1900µs)
//#define TX_MPX //Multiplex MC2020 (1250<->1950µs)
//#define TX_CUSTOM //Custom
#define TX_TARANIS //TARANIS AETR (1100<->1900µs)
//#define TX_DEVO7 //DEVO (1120<->1920µs)
//#define TX_SPEKTRUM //Spektrum (1100<->1900µs)
//#define TX_HISKY //HISKY (1100<->1900µs)
//#define TX_MPX //Multiplex MC2020 (1250<->1950µs)
//#define TX_CUSTOM //Custom
// The lines below are used to set the end points in microseconds (µs) if you have selected TX_CUSTOM.
// A few things to considered:
// A few things to consider:
// - If you put too big values compared to your TX you won't be able to reach the extremes which is bad for throttle as an example
// - If you put too low values you won't be able to use your full stick range, it will be maxed out before reaching the end
// - If you put too low values you won't be able to use your full stick range, it will be maxed out before reaching the ends
// - Centered stick value is usually 1500. It should match the middle between MIN and MAX, ie Center=(MAX-MIN)/2+MIN. If your TX is not centered you can adjust the value MIN or MAX.
// - 100% is the value when the model is by default, 125% is the value when you extend the servo travel which is only used by some protocols
#if defined(TX_CUSTOM)
@ -276,7 +284,7 @@ const PPM_Parameters PPM_prot[15]= {
// Auto Bind AUTOBIND or NO_AUTOBIND
// For protocols which does not require binding at each power up (like Flysky, FrSky...), you might still want a bind to be initiated each time you power up the TX.
// As an exxample, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up.
// As an example, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up.
// Option: the value is between -127 and +127.
// The option value is only valid for some protocols, read this page for more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md

890
Multiprotocol/boards.txt Normal file
View File

@ -0,0 +1,890 @@
# See: http://code.google.com/p/arduino/wiki/Platforms
menu.cpu=Processor
##############################################################
yun.name=Arduino Yún
yun.upload.via_ssh=true
yun.vid.0=0x2341
yun.pid.0=0x0041
yun.vid.1=0x2341
yun.pid.1=0x8041
yun.vid.2=0x2A03
yun.pid.2=0x0041
yun.vid.3=0x2A03
yun.pid.3=0x8041
yun.upload.tool=avrdude
yun.upload.protocol=avr109
yun.upload.maximum_size=28672
yun.upload.maximum_data_size=2560
yun.upload.speed=57600
yun.upload.disable_flushing=true
yun.upload.use_1200bps_touch=true
yun.upload.wait_for_upload_port=true
yun.bootloader.tool=avrdude
yun.bootloader.low_fuses=0xff
yun.bootloader.high_fuses=0xd8
yun.bootloader.extended_fuses=0xfb
yun.bootloader.file=caterina/Caterina-Yun.hex
yun.bootloader.unlock_bits=0x3F
yun.bootloader.lock_bits=0x2F
yun.build.mcu=atmega32u4
yun.build.f_cpu=16000000L
yun.build.vid=0x2341
yun.build.pid=0x8041
yun.build.usb_product="Arduino Yun"
yun.build.board=AVR_YUN
yun.build.core=arduino
yun.build.variant=yun
yun.build.extra_flags={build.usb_flags}
##############################################################
uno.name=Arduino/Genuino Uno
uno.vid.0=0x2341
uno.pid.0=0x0043
uno.vid.1=0x2341
uno.pid.1=0x0001
uno.vid.2=0x2A03
uno.pid.2=0x0043
uno.vid.3=0x2341
uno.pid.3=0x0243
uno.upload.tool=avrdude
uno.upload.protocol=arduino
uno.upload.maximum_size=32256
uno.upload.maximum_data_size=2048
uno.upload.speed=115200
uno.bootloader.tool=avrdude
uno.bootloader.low_fuses=0xFF
uno.bootloader.high_fuses=0xDE
uno.bootloader.extended_fuses=0x05
uno.bootloader.unlock_bits=0x3F
uno.bootloader.lock_bits=0x0F
uno.bootloader.file=optiboot/optiboot_atmega328.hex
uno.build.mcu=atmega328p
uno.build.f_cpu=16000000L
uno.build.board=AVR_UNO
uno.build.core=arduino
uno.build.variant=standard
##############################################################
diecimila.name=Arduino Duemilanove or Diecimila
diecimila.upload.tool=avrdude
diecimila.upload.protocol=arduino
diecimila.bootloader.tool=avrdude
diecimila.bootloader.low_fuses=0xFF
diecimila.bootloader.unlock_bits=0x3F
diecimila.bootloader.lock_bits=0x0F
diecimila.build.f_cpu=16000000L
diecimila.build.board=AVR_DUEMILANOVE
diecimila.build.core=arduino
diecimila.build.variant=standard
## Arduino Duemilanove or Diecimila w/ ATmega328
## ---------------------------------------------
diecimila.menu.cpu.atmega328=ATmega328
diecimila.menu.cpu.atmega328.upload.maximum_size=30720
diecimila.menu.cpu.atmega328.upload.maximum_data_size=2048
diecimila.menu.cpu.atmega328.upload.speed=57600
diecimila.menu.cpu.atmega328.bootloader.high_fuses=0xDA
diecimila.menu.cpu.atmega328.bootloader.extended_fuses=0x05
diecimila.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
diecimila.menu.cpu.atmega328.build.mcu=atmega328p
## Arduino Duemilanove or Diecimila w/ ATmega168
## ---------------------------------------------
diecimila.menu.cpu.atmega168=ATmega168
diecimila.menu.cpu.atmega168.upload.maximum_size=14336
diecimila.menu.cpu.atmega168.upload.maximum_data_size=1024
diecimila.menu.cpu.atmega168.upload.speed=19200
diecimila.menu.cpu.atmega168.bootloader.high_fuses=0xdd
diecimila.menu.cpu.atmega168.bootloader.extended_fuses=0x00
diecimila.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
diecimila.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
nano.name=Arduino Nano
nano.upload.tool=avrdude
nano.upload.protocol=arduino
nano.bootloader.tool=avrdude
nano.bootloader.unlock_bits=0x3F
nano.bootloader.lock_bits=0x0F
nano.build.f_cpu=16000000L
nano.build.board=AVR_NANO
nano.build.core=arduino
nano.build.variant=eightanaloginputs
## Arduino Nano w/ ATmega328
## -------------------------
nano.menu.cpu.atmega328=ATmega328
nano.menu.cpu.atmega328.upload.maximum_size=30720
nano.menu.cpu.atmega328.upload.maximum_data_size=2048
nano.menu.cpu.atmega328.upload.speed=57600
nano.menu.cpu.atmega328.bootloader.low_fuses=0xFF
nano.menu.cpu.atmega328.bootloader.high_fuses=0xDA
nano.menu.cpu.atmega328.bootloader.extended_fuses=0x05
nano.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
nano.menu.cpu.atmega328.build.mcu=atmega328p
## Arduino Nano w/ ATmega168
## -------------------------
nano.menu.cpu.atmega168=ATmega168
nano.menu.cpu.atmega168.upload.maximum_size=14336
nano.menu.cpu.atmega168.upload.maximum_data_size=1024
nano.menu.cpu.atmega168.upload.speed=19200
nano.menu.cpu.atmega168.bootloader.low_fuses=0xff
nano.menu.cpu.atmega168.bootloader.high_fuses=0xdd
nano.menu.cpu.atmega168.bootloader.extended_fuses=0x00
nano.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
nano.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
mega.name=Arduino/Genuino Mega or Mega 2560
mega.vid.0=0x2341
mega.pid.0=0x0010
mega.vid.1=0x2341
mega.pid.1=0x0042
mega.vid.2=0x2A03
mega.pid.2=0x0010
mega.vid.3=0x2A03
mega.pid.3=0x0042
mega.vid.4=0x2341
mega.pid.4=0x0210
mega.vid.5=0x2341
mega.pid.5=0x0242
mega.upload.tool=avrdude
mega.upload.maximum_data_size=8192
mega.bootloader.tool=avrdude
mega.bootloader.low_fuses=0xFF
mega.bootloader.unlock_bits=0x3F
mega.bootloader.lock_bits=0x0F
mega.build.f_cpu=16000000L
mega.build.core=arduino
mega.build.variant=mega
# default board may be overridden by the cpu menu
mega.build.board=AVR_MEGA2560
## Arduino/Genuino Mega w/ ATmega2560
## -------------------------
mega.menu.cpu.atmega2560=ATmega2560 (Mega 2560)
mega.menu.cpu.atmega2560.upload.protocol=wiring
mega.menu.cpu.atmega2560.upload.maximum_size=253952
mega.menu.cpu.atmega2560.upload.speed=115200
mega.menu.cpu.atmega2560.bootloader.high_fuses=0xD8
mega.menu.cpu.atmega2560.bootloader.extended_fuses=0xFD
mega.menu.cpu.atmega2560.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex
mega.menu.cpu.atmega2560.build.mcu=atmega2560
mega.menu.cpu.atmega2560.build.board=AVR_MEGA2560
## Arduino Mega w/ ATmega1280
## -------------------------
mega.menu.cpu.atmega1280=ATmega1280
mega.menu.cpu.atmega1280.upload.protocol=arduino
mega.menu.cpu.atmega1280.upload.maximum_size=126976
mega.menu.cpu.atmega1280.upload.speed=57600
mega.menu.cpu.atmega1280.bootloader.high_fuses=0xDA
mega.menu.cpu.atmega1280.bootloader.extended_fuses=0xF5
mega.menu.cpu.atmega1280.bootloader.file=atmega/ATmegaBOOT_168_atmega1280.hex
mega.menu.cpu.atmega1280.build.mcu=atmega1280
mega.menu.cpu.atmega1280.build.board=AVR_MEGA
##############################################################
megaADK.name=Arduino Mega ADK
megaADK.vid.0=0x2341
megaADK.pid.0=0x003f
megaADK.vid.1=0x2341
megaADK.pid.1=0x0044
megaADK.vid.2=0x2A03
megaADK.pid.2=0x003f
megaADK.vid.3=0x2A03
megaADK.pid.3=0x0044
megaADK.upload.tool=avrdude
megaADK.upload.protocol=wiring
megaADK.upload.maximum_size=253952
megaADK.upload.maximum_data_size=8192
megaADK.upload.speed=115200
megaADK.bootloader.tool=avrdude
megaADK.bootloader.low_fuses=0xFF
megaADK.bootloader.high_fuses=0xD8
megaADK.bootloader.extended_fuses=0xFD
megaADK.bootloader.file=stk500v2/stk500boot_v2_mega2560.hex
megaADK.bootloader.unlock_bits=0x3F
megaADK.bootloader.lock_bits=0x0F
megaADK.build.mcu=atmega2560
megaADK.build.f_cpu=16000000L
megaADK.build.board=AVR_ADK
megaADK.build.core=arduino
megaADK.build.variant=mega
##############################################################
leonardo.name=Arduino Leonardo
leonardo.vid.0=0x2341
leonardo.pid.0=0x0036
leonardo.vid.1=0x2341
leonardo.pid.1=0x8036
leonardo.vid.2=0x2A03
leonardo.pid.2=0x0036
leonardo.vid.3=0x2A03
leonardo.pid.3=0x8036
leonardo.upload.tool=avrdude
leonardo.upload.protocol=avr109
leonardo.upload.maximum_size=28672
leonardo.upload.maximum_data_size=2560
leonardo.upload.speed=57600
leonardo.upload.disable_flushing=true
leonardo.upload.use_1200bps_touch=true
leonardo.upload.wait_for_upload_port=true
leonardo.bootloader.tool=avrdude
leonardo.bootloader.low_fuses=0xff
leonardo.bootloader.high_fuses=0xd8
leonardo.bootloader.extended_fuses=0xcb
leonardo.bootloader.file=caterina/Caterina-Leonardo.hex
leonardo.bootloader.unlock_bits=0x3F
leonardo.bootloader.lock_bits=0x2F
leonardo.build.mcu=atmega32u4
leonardo.build.f_cpu=16000000L
leonardo.build.vid=0x2341
leonardo.build.pid=0x8036
leonardo.build.usb_product="Arduino Leonardo"
leonardo.build.board=AVR_LEONARDO
leonardo.build.core=arduino
leonardo.build.variant=leonardo
leonardo.build.extra_flags={build.usb_flags}
##############################################################
micro.name=Arduino/Genuino Micro
micro.vid.0=0x2341
micro.pid.0=0x0037
micro.vid.1=0x2341
micro.pid.1=0x8037
micro.vid.2=0x2A03
micro.pid.2=0x0037
micro.vid.3=0x2A03
micro.pid.3=0x8037
micro.vid.4=0x2341
micro.pid.4=0x0237
# If the board is a 2341:0237 use 2341:8237 for build and set
# other parameters as well
micro.vid.4.build.vid=0x2341
micro.vid.4.build.pid=0x8237
micro.vid.4.build.usb_product="Genuino Micro"
micro.vid.4.bootloader.file=caterina/Caterina-Genuino-Micro.hex
micro.vid.5=0x2341
micro.pid.5=0x8237
# If the board is a 2341:8237 use 2341:8237 for build and set
# other paramters as well
micro.vid.5.build.vid=0x2341
micro.vid.5.build.pid=0x8237
micro.vid.5.build.usb_product="Genuino Micro"
micro.vid.5.bootloader.file=caterina/Caterina-Genuino-Micro.hex
micro.upload.tool=avrdude
micro.upload.protocol=avr109
micro.upload.maximum_size=28672
micro.upload.maximum_data_size=2560
micro.upload.speed=57600
micro.upload.disable_flushing=true
micro.upload.use_1200bps_touch=true
micro.upload.wait_for_upload_port=true
micro.bootloader.tool=avrdude
micro.bootloader.low_fuses=0xff
micro.bootloader.high_fuses=0xd8
micro.bootloader.extended_fuses=0xcb
micro.bootloader.file=caterina/Caterina-Micro.hex
micro.bootloader.unlock_bits=0x3F
micro.bootloader.lock_bits=0x2F
micro.build.mcu=atmega32u4
micro.build.f_cpu=16000000L
micro.build.vid=0x2341
micro.build.pid=0x8037
micro.build.usb_product="Arduino Micro"
micro.build.board=AVR_MICRO
micro.build.core=arduino
micro.build.variant=micro
micro.build.extra_flags={build.usb_flags}
##############################################################
esplora.name=Arduino Esplora
esplora.vid.0=0x2341
esplora.pid.0=0x003C
esplora.vid.1=0x2341
esplora.pid.1=0x803C
esplora.vid.2=0x2A03
esplora.pid.2=0x003C
esplora.vid.3=0x2A03
esplora.pid.3=0x803C
esplora.upload.tool=avrdude
esplora.upload.protocol=avr109
esplora.upload.maximum_size=28672
esplora.upload.maximum_data_size=2560
esplora.upload.speed=57600
esplora.upload.disable_flushing=true
esplora.upload.use_1200bps_touch=true
esplora.upload.wait_for_upload_port=true
esplora.bootloader.tool=avrdude
esplora.bootloader.low_fuses=0xff
esplora.bootloader.high_fuses=0xd8
esplora.bootloader.extended_fuses=0xcb
esplora.bootloader.file=caterina/Caterina-Esplora.hex
esplora.bootloader.unlock_bits=0x3F
esplora.bootloader.lock_bits=0x2F
esplora.build.mcu=atmega32u4
esplora.build.f_cpu=16000000L
esplora.build.vid=0x2341
esplora.build.pid=0x803c
esplora.build.usb_product="Arduino Esplora"
esplora.build.board=AVR_ESPLORA
esplora.build.core=arduino
esplora.build.variant=leonardo
esplora.build.extra_flags={build.usb_flags}
##############################################################
mini.name=Arduino Mini
mini.upload.tool=avrdude
mini.upload.protocol=arduino
mini.bootloader.tool=avrdude
mini.bootloader.low_fuses=0xff
mini.bootloader.unlock_bits=0x3F
mini.bootloader.lock_bits=0x0F
mini.build.f_cpu=16000000L
mini.build.board=AVR_MINI
mini.build.core=arduino
mini.build.variant=eightanaloginputs
## Arduino Mini w/ ATmega328
## -------------------------
mini.menu.cpu.atmega328=ATmega328
mini.menu.cpu.atmega328.upload.maximum_size=28672
mini.menu.cpu.atmega328.upload.maximum_data_size=2048
mini.menu.cpu.atmega328.upload.speed=115200
mini.menu.cpu.atmega328.bootloader.high_fuses=0xd8
mini.menu.cpu.atmega328.bootloader.extended_fuses=0x05
mini.menu.cpu.atmega328.bootloader.file=optiboot/optiboot_atmega328-Mini.hex
mini.menu.cpu.atmega328.build.mcu=atmega328p
## Arduino Mini w/ ATmega168
## -------------------------
mini.menu.cpu.atmega168=ATmega168
mini.menu.cpu.atmega168.upload.maximum_size=14336
mini.menu.cpu.atmega168.upload.maximum_data_size=1024
mini.menu.cpu.atmega168.upload.speed=19200
mini.menu.cpu.atmega168.bootloader.high_fuses=0xdd
mini.menu.cpu.atmega168.bootloader.extended_fuses=0x00
mini.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex
mini.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
ethernet.name=Arduino Ethernet
ethernet.upload.tool=avrdude
ethernet.upload.protocol=arduino
ethernet.upload.maximum_size=32256
ethernet.upload.maximum_data_size=2048
ethernet.upload.speed=115200
ethernet.bootloader.tool=avrdude
ethernet.bootloader.low_fuses=0xff
ethernet.bootloader.high_fuses=0xde
ethernet.bootloader.extended_fuses=0x05
ethernet.bootloader.file=optiboot/optiboot_atmega328.hex
ethernet.bootloader.unlock_bits=0x3F
ethernet.bootloader.lock_bits=0x0F
ethernet.build.variant=ethernet
ethernet.build.mcu=atmega328p
ethernet.build.f_cpu=16000000L
ethernet.build.board=AVR_ETHERNET
ethernet.build.core=arduino
##############################################################
fio.name=Arduino Fio
fio.upload.tool=avrdude
fio.upload.protocol=arduino
fio.upload.maximum_size=30720
fio.upload.maximum_data_size=2048
fio.upload.speed=57600
fio.bootloader.tool=avrdude
fio.bootloader.low_fuses=0xFF
fio.bootloader.high_fuses=0xDA
fio.bootloader.extended_fuses=0x05
fio.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
fio.bootloader.unlock_bits=0x3F
fio.bootloader.lock_bits=0x0F
fio.build.mcu=atmega328p
fio.build.f_cpu=8000000L
fio.build.board=AVR_FIO
fio.build.core=arduino
fio.build.variant=eightanaloginputs
##############################################################
bt.name=Arduino BT
bt.upload.tool=avrdude
bt.upload.protocol=arduino
bt.upload.speed=19200
bt.upload.disable_flushing=true
bt.bootloader.tool=avrdude
bt.bootloader.low_fuses=0xff
bt.bootloader.unlock_bits=0x3F
bt.bootloader.lock_bits=0x0F
bt.build.f_cpu=16000000L
bt.build.board=AVR_BT
bt.build.core=arduino
bt.build.variant=eightanaloginputs
## Arduino BT w/ ATmega328
## -----------------------
bt.menu.cpu.atmega328=ATmega328
bt.menu.cpu.atmega328.upload.maximum_size=28672
bt.menu.cpu.atmega328.upload.maximum_data_size=2048
bt.menu.cpu.atmega328.bootloader.high_fuses=0xd8
bt.menu.cpu.atmega328.bootloader.extended_fuses=0x05
bt.menu.cpu.atmega328.bootloader.file=bt/ATmegaBOOT_168_atmega328_bt.hex
bt.menu.cpu.atmega328.build.mcu=atmega328p
## Arduino BT w/ ATmega168
## -----------------------
bt.menu.cpu.atmega168=ATmega168
bt.menu.cpu.atmega168.upload.maximum_size=14336
bt.menu.cpu.atmega168.upload.maximum_data_size=1024
bt.menu.cpu.atmega168.bootloader.high_fuses=0xdd
bt.menu.cpu.atmega168.bootloader.extended_fuses=0x00
bt.menu.cpu.atmega168.bootloader.file=bt/ATmegaBOOT_168.hex
bt.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
LilyPadUSB.name=LilyPad Arduino USB
LilyPadUSB.vid.0=0x1B4F
LilyPadUSB.pid.0=0x9207
LilyPadUSB.vid.1=0x1B4F
LilyPadUSB.pid.1=0x9208
LilyPadUSB.upload.tool=avrdude
LilyPadUSB.upload.protocol=avr109
LilyPadUSB.upload.maximum_size=28672
LilyPadUSB.upload.maximum_data_size=2560
LilyPadUSB.upload.speed=57600
LilyPadUSB.upload.disable_flushing=true
LilyPadUSB.upload.use_1200bps_touch=true
LilyPadUSB.upload.wait_for_upload_port=true
LilyPadUSB.bootloader.tool=avrdude
LilyPadUSB.bootloader.low_fuses=0xff
LilyPadUSB.bootloader.high_fuses=0xd8
LilyPadUSB.bootloader.extended_fuses=0xce
LilyPadUSB.bootloader.file=caterina-LilyPadUSB/Caterina-LilyPadUSB.hex
LilyPadUSB.bootloader.unlock_bits=0x3F
LilyPadUSB.bootloader.lock_bits=0x2F
LilyPadUSB.build.mcu=atmega32u4
LilyPadUSB.build.f_cpu=8000000L
LilyPadUSB.build.vid=0x1B4F
LilyPadUSB.build.pid=0x9208
LilyPadUSB.build.usb_product="LilyPad USB"
LilyPadUSB.build.board=AVR_LILYPAD_USB
LilyPadUSB.build.core=arduino
LilyPadUSB.build.variant=leonardo
LilyPadUSB.build.extra_flags={build.usb_flags}
##############################################################
lilypad.name=LilyPad Arduino
lilypad.upload.tool=avrdude
lilypad.upload.protocol=arduino
lilypad.bootloader.tool=avrdude
lilypad.bootloader.unlock_bits=0x3F
lilypad.bootloader.lock_bits=0x0F
lilypad.build.f_cpu=8000000L
lilypad.build.board=AVR_LILYPAD
lilypad.build.core=arduino
lilypad.build.variant=standard
## LilyPad Arduino w/ ATmega328
## ----------------------------
lilypad.menu.cpu.atmega328=ATmega328
lilypad.menu.cpu.atmega328.upload.maximum_size=30720
lilypad.menu.cpu.atmega328.upload.maximum_data_size=2048
lilypad.menu.cpu.atmega328.upload.speed=57600
lilypad.menu.cpu.atmega328.bootloader.low_fuses=0xFF
lilypad.menu.cpu.atmega328.bootloader.high_fuses=0xDA
lilypad.menu.cpu.atmega328.bootloader.extended_fuses=0x05
lilypad.menu.cpu.atmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
lilypad.menu.cpu.atmega328.build.mcu=atmega328p
## LilyPad Arduino w/ ATmega168
## ----------------------------
lilypad.menu.cpu.atmega168=ATmega168
lilypad.menu.cpu.atmega168.upload.maximum_size=14336
lilypad.menu.cpu.atmega168.upload.maximum_data_size=1024
lilypad.menu.cpu.atmega168.upload.speed=19200
lilypad.menu.cpu.atmega168.bootloader.low_fuses=0xe2
lilypad.menu.cpu.atmega168.bootloader.high_fuses=0xdd
lilypad.menu.cpu.atmega168.bootloader.extended_fuses=0x00
lilypad.menu.cpu.atmega168.bootloader.file=lilypad/LilyPadBOOT_168.hex
lilypad.menu.cpu.atmega168.build.mcu=atmega168
##############################################################
pro.name=Arduino Pro or Pro Mini
pro.upload.tool=avrdude
pro.upload.protocol=arduino
pro.bootloader.tool=avrdude
pro.bootloader.unlock_bits=0x3F
pro.bootloader.lock_bits=0x0F
pro.build.board=AVR_PRO
pro.build.core=arduino
pro.build.variant=eightanaloginputs
## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega328
## -------------------------------------------------
pro.menu.cpu.16MHzatmega328=ATmega328 (5V, 16 MHz)
pro.menu.cpu.16MHzatmega328.upload.maximum_size=30720
pro.menu.cpu.16MHzatmega328.upload.maximum_data_size=2048
pro.menu.cpu.16MHzatmega328.upload.speed=57600
pro.menu.cpu.16MHzatmega328.bootloader.low_fuses=0xFF
pro.menu.cpu.16MHzatmega328.bootloader.high_fuses=0xDA
pro.menu.cpu.16MHzatmega328.bootloader.extended_fuses=0x05
pro.menu.cpu.16MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328.hex
pro.menu.cpu.16MHzatmega328.build.mcu=atmega328p
pro.menu.cpu.16MHzatmega328.build.f_cpu=16000000L
## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega328
## --------------------------------------------------
pro.menu.cpu.8MHzatmega328=ATmega328 (3.3V, 8 MHz)
pro.menu.cpu.8MHzatmega328.upload.maximum_size=30720
pro.menu.cpu.8MHzatmega328.upload.maximum_data_size=2048
pro.menu.cpu.8MHzatmega328.upload.speed=57600
pro.menu.cpu.8MHzatmega328.bootloader.low_fuses=0xFF
pro.menu.cpu.8MHzatmega328.bootloader.high_fuses=0xDA
pro.menu.cpu.8MHzatmega328.bootloader.extended_fuses=0x05
pro.menu.cpu.8MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
pro.menu.cpu.8MHzatmega328.build.mcu=atmega328p
pro.menu.cpu.8MHzatmega328.build.f_cpu=8000000L
## Arduino Pro or Pro Mini (5V, 16 MHz) w/ ATmega168
## -------------------------------------------------
pro.menu.cpu.16MHzatmega168=ATmega168 (5V, 16 MHz)
pro.menu.cpu.16MHzatmega168.upload.maximum_size=14336
pro.menu.cpu.16MHzatmega168.upload.maximum_data_size=1024
pro.menu.cpu.16MHzatmega168.upload.speed=19200
pro.menu.cpu.16MHzatmega168.bootloader.low_fuses=0xff
pro.menu.cpu.16MHzatmega168.bootloader.high_fuses=0xdd
pro.menu.cpu.16MHzatmega168.bootloader.extended_fuses=0x00
pro.menu.cpu.16MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_diecimila.hex
pro.menu.cpu.16MHzatmega168.build.mcu=atmega168
pro.menu.cpu.16MHzatmega168.build.f_cpu=16000000L
## Arduino Pro or Pro Mini (3.3V, 8 MHz) w/ ATmega168
## --------------------------------------------------
pro.menu.cpu.8MHzatmega168=ATmega168 (3.3V, 8 MHz)
pro.menu.cpu.8MHzatmega168.upload.maximum_size=14336
pro.menu.cpu.8MHzatmega168.upload.maximum_data_size=1024
pro.menu.cpu.8MHzatmega168.upload.speed=19200
pro.menu.cpu.8MHzatmega168.bootloader.low_fuses=0xc6
pro.menu.cpu.8MHzatmega168.bootloader.high_fuses=0xdd
pro.menu.cpu.8MHzatmega168.bootloader.extended_fuses=0x00
pro.menu.cpu.8MHzatmega168.bootloader.file=atmega/ATmegaBOOT_168_pro_8MHz.hex
pro.menu.cpu.8MHzatmega168.build.mcu=atmega168
pro.menu.cpu.8MHzatmega168.build.f_cpu=8000000L
##############################################################
atmegang.name=Arduino NG or older
atmegang.upload.tool=avrdude
atmegang.upload.protocol=arduino
atmegang.upload.speed=19200
atmegang.bootloader.tool=avrdude
atmegang.bootloader.unlock_bits=0x3F
atmegang.bootloader.lock_bits=0x0F
atmegang.build.mcu=atmegang
atmegang.build.f_cpu=16000000L
atmegang.build.board=AVR_NG
atmegang.build.core=arduino
atmegang.build.variant=standard
## Arduino NG or older w/ ATmega168
## --------------------------------
atmegang.menu.cpu.atmega168=ATmega168
atmegang.menu.cpu.atmega168.upload.maximum_size=14336
atmegang.menu.cpu.atmega168.upload.maximum_data_size=1024
atmegang.menu.cpu.atmega168.bootloader.low_fuses=0xff
atmegang.menu.cpu.atmega168.bootloader.high_fuses=0xdd
atmegang.menu.cpu.atmega168.bootloader.extended_fuses=0x00
atmegang.menu.cpu.atmega168.bootloader.file=atmega/ATmegaBOOT_168_ng.hex
atmegang.menu.cpu.atmega168.build.mcu=atmega168
## Arduino NG or older w/ ATmega8
## ------------------------------
atmegang.menu.cpu.atmega8=ATmega8
atmegang.menu.cpu.atmega8.upload.maximum_size=7168
atmegang.menu.cpu.atmega8.upload.maximum_data_size=1024
atmegang.menu.cpu.atmega8.bootloader.low_fuses=0xdf
atmegang.menu.cpu.atmega8.bootloader.high_fuses=0xca
atmegang.menu.cpu.atmega8.bootloader.file=atmega8/ATmegaBOOT-prod-firmware-2009-11-07.hex
atmegang.menu.cpu.atmega8.build.mcu=atmega8
##############################################################
robotControl.name=Arduino Robot Control
robotControl.vid.0=0x2341
robotControl.pid.0=0x0038
robotControl.vid.1=0x2341
robotControl.pid.1=0x8038
robotControl.vid.2=0x2A03
robotControl.pid.2=0x0038
robotControl.vid.3=0x2A03
robotControl.pid.3=0x8038
robotControl.upload.tool=avrdude
robotControl.upload.protocol=avr109
robotControl.upload.maximum_size=28672
robotControl.upload.maximum_data_size=2560
robotControl.upload.speed=57600
robotControl.upload.disable_flushing=true
robotControl.upload.use_1200bps_touch=true
robotControl.upload.wait_for_upload_port=true
robotControl.bootloader.tool=avrdude
robotControl.bootloader.low_fuses=0xff
robotControl.bootloader.high_fuses=0xd8
robotControl.bootloader.extended_fuses=0xcb
robotControl.bootloader.file=caterina-Arduino_Robot/Caterina-Robot-Control.hex
robotControl.bootloader.unlock_bits=0x3F
robotControl.bootloader.lock_bits=0x2F
robotControl.build.mcu=atmega32u4
robotControl.build.f_cpu=16000000L
robotControl.build.vid=0x2341
robotControl.build.pid=0x8038
robotControl.build.usb_product="Robot Control"
robotControl.build.board=AVR_ROBOT_CONTROL
robotControl.build.core=arduino
robotControl.build.variant=robot_control
robotControl.build.extra_flags={build.usb_flags}
##############################################################
robotMotor.name=Arduino Robot Motor
robotMotor.vid.0=0x2341
robotMotor.pid.0=0x0039
robotMotor.vid.1=0x2341
robotMotor.pid.1=0x8039
robotMotor.vid.2=0x2A03
robotMotor.pid.2=0x0039
robotMotor.vid.3=0x2A03
robotMotor.pid.3=0x8039
robotMotor.upload.tool=avrdude
robotMotor.upload.protocol=avr109
robotMotor.upload.maximum_size=28672
robotMotor.upload.maximum_data_size=2560
robotMotor.upload.speed=57600
robotMotor.upload.disable_flushing=true
robotMotor.upload.use_1200bps_touch=true
robotMotor.upload.wait_for_upload_port=true
robotMotor.bootloader.tool=avrdude
robotMotor.bootloader.low_fuses=0xff
robotMotor.bootloader.high_fuses=0xd8
robotMotor.bootloader.extended_fuses=0xcb
robotMotor.bootloader.file=caterina-Arduino_Robot/Caterina-Robot-Motor.hex
robotMotor.bootloader.unlock_bits=0x3F
robotMotor.bootloader.lock_bits=0x2F
robotMotor.build.mcu=atmega32u4
robotMotor.build.f_cpu=16000000L
robotMotor.build.vid=0x2341
robotMotor.build.pid=0x8039
robotMotor.build.usb_product="Robot Motor"
robotMotor.build.board=AVR_ROBOT_MOTOR
robotMotor.build.core=arduino
robotMotor.build.variant=robot_motor
robotMotor.build.extra_flags={build.usb_flags}
##############################################################
gemma.vid.0=0x2341
gemma.pid.0=0x0c9f
gemma.name=Arduino Gemma
gemma.bootloader.low_fuses=0xF1
gemma.bootloader.high_fuses=0xD5
gemma.bootloader.extended_fuses=0xFE
gemma.bootloader.tool=avrdude
gemma.bootloader.lock_bits=
gemma.bootloader.unlock_bits=
gemma.bootloader.file=gemma/gemma_v1.hex
gemma.build.mcu=attiny85
gemma.build.f_cpu=8000000L
gemma.build.core=arduino
gemma.build.variant=gemma
gemma.build.board=AVR_GEMMA
gemma.upload.tool=avrdude
gemma.upload.maximum_size=5310
##############################################################
## Multi 4-in-1 (3.3V, 16 MHz) w/ ATmega328
## --------------------------------------------------
multi.name=Multi 4-in-1
multi.upload.tool=avrdude
multi.upload.protocol=arduino
multi.bootloader.tool=avrdude
multi.bootloader.unlock_bits=0x3F
multi.bootloader.lock_bits=0x0F
multi.build.board=AVR_PRO
multi.build.core=arduino
multi.build.variant=eightanaloginputs
multi.menu.cpu.16MHzatmega328=ATmega328 (3.3V, 16 MHz)
multi.menu.cpu.16MHzatmega328.upload.maximum_size=32768
multi.menu.cpu.16MHzatmega328.upload.maximum_data_size=2048
multi.menu.cpu.16MHzatmega328.upload.speed=57600
multi.menu.cpu.16MHzatmega328.upload.using=arduino:arduinoisp
multi.menu.cpu.16MHzatmega328.bootloader.low_fuses=0xFF
multi.menu.cpu.16MHzatmega328.bootloader.high_fuses=0xD2
multi.menu.cpu.16MHzatmega328.bootloader.extended_fuses=0xFD
multi.menu.cpu.16MHzatmega328.bootloader.file=atmega/ATmegaBOOT_168_atmega328_pro_8MHz.hex
multi.menu.cpu.16MHzatmega328.build.mcu=atmega328p
multi.menu.cpu.16MHzatmega328.build.f_cpu=16000000L
## --------------------------------------------------
multi.menu.cpu.16MHzatmega328opti=ATmega328 Opti (3.3V, 16 MHz)
multi.menu.cpu.16MHzatmega328opti.upload.maximum_size=32768
multi.menu.cpu.16MHzatmega328opti.upload.maximum_data_size=2048
multi.menu.cpu.16MHzatmega328opti.upload.speed=57600
multi.menu.cpu.16MHzatmega328opti.upload.using=arduino:arduinoisp
multi.menu.cpu.16MHzatmega328opti.bootloader.low_fuses=0xFF
multi.menu.cpu.16MHzatmega328opti.bootloader.high_fuses=0xD6
multi.menu.cpu.16MHzatmega328opti.bootloader.extended_fuses=0xFD
multi.menu.cpu.16MHzatmega328opti.bootloader.file=atmega/optiboot_atmega328_16.hex
multi.menu.cpu.16MHzatmega328opti.build.mcu=atmega328p
multi.menu.cpu.16MHzatmega328opti.build.f_cpu=16000000L
##############################################################

1
Multiprotocol/iface_a7105.h
View File

@ -90,6 +90,7 @@ enum A7105_MASK {
enum {
INIT_FLYSKY,
INIT_FLYSKY_AFHDS2A,
INIT_JOYSWAY,
INIT_HUBSAN
};

42
Multiprotocol/multiprotocol.h
View File

@ -13,16 +13,6 @@
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
*/
// Check selected board type
#ifndef XMEGA
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
// #error You must select the board type "Arduino Pro or Pro Mini" or "Arduino Mini"
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
//******************
// Protocols max 31 x2
//******************
@ -168,7 +158,10 @@ enum FY326
FY326 = 0,
FY319 = 1
};
enum{
FORMAT_V202 = 0,
FORMAT_JXD506 = 1,
};
enum WK2X01
{
WK2801 = 0,
@ -207,27 +200,6 @@ struct PPM_Parameters
// Macros
#define NOP() __asm__ __volatile__("nop")
//*******************
//*** Timer ***
//*******************
#ifdef XMEGA
#define TIFR1 TCC1.INTFLAGS
#define OCF1A_bm TC1_CCAIF_bm
#define OCR1A TCC1.CCA
#define TCNT1 TCC1.CNT
#define UDR0 USARTC0.DATA
#define OCF1B_bm TC1_CCBIF_bm
#define OCR1B TCC1.CCB
#define TIMSK1 TCC1.INTCTRLB
#define SET_TIMSK1_OCIE1B TIMSK1 = (TIMSK1 & 0xF3) | 0x04
#define CLR_TIMSK1_OCIE1B TIMSK1 &= 0xF3
#else
#define OCF1A_bm _BV(OCF1A)
#define OCF1B_bm _BV(OCF1B)
#define SET_TIMSK1_OCIE1B TIMSK1 |= _BV(OCIE1B)
#define CLR_TIMSK1_OCIE1B TIMSK1 &=~_BV(OCIE1B)
#endif
//***************
//*** Flags ***
//***************
@ -522,9 +494,9 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
CH_16 0
CH_8 1
sub_protocol==HONTAI
HONTAI 0
JJRCX1 1
X5C1 2
FORMAT_HONTAI 0
FORMAT_JJRCX1 1
FORMAT_X5C1 2
FQ777-521 3
Power value => 0x80 0=High/1=Low
Stream[3] = option_protocol;