gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 19:58:13 +00:00
Code Issues Projects Releases Wiki Activity

Fix OMP protocol

Browse Source
This commit is contained in:
Pascal Langer 2021-01-25 11:33:30 +01:00
parent 9c6c55fa00
commit 7676398aab
17 changed files with 26 additions and 78 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Multiprotocol/Corona_cc2500.ino
View File

@ -61,7 +61,6 @@ static void __attribute__((unused)) CORONA_rf_init()
CC2500_WriteReg(CC2500_15_DEVIATN, 0x50);
}
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
//not sure what they are doing to the PATABLE since basically only the first byte is used and it's only 8 bytes long. So I think they end up filling the PATABLE fully with 0xFF
@ -262,11 +261,7 @@ uint16_t ReadCORONA()
telemetry_set_input_sync(22000);
#endif
// Tune frequency if it has been changed
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
prev_option = option ;
}
CC2500_SetFreqOffset();
if(IS_BIND_IN_PROGRESS)
{

2
Multiprotocol/ESky150v2_cc2500.ino
View File

@ -79,7 +79,6 @@ static void __attribute__((unused)) ESKY150V2_send_packet()
uint16_t ESKY150V2_callback()
{
if(option==0) option=1; //Trick the RF component auto select system
if(IS_BIND_DONE)
{
#ifdef MULTI_SYNC
@ -107,7 +106,6 @@ uint16_t ESKY150V2_callback()
uint16_t initESKY150V2()
{
if(option==0) option=1; // Trick the RF component auto select system
CC2500_250K_Init();
ESKY150V2_set_freq();
hopping_frequency_no = 0;

3
Multiprotocol/FrSkyDVX_common.ino
View File

@ -375,7 +375,6 @@ void Frsky_init_clone(void)
val=option;
CC2500_WriteReg(reg,val);
}
prev_option = option ; // Save option to monitor FSCTRL0 change
for(uint8_t i=0;i<17;i++)
{
uint8_t reg=pgm_read_byte_near(&FRSKY_common_end_cc2500_conf[i][0]);
@ -406,7 +405,7 @@ void Frsky_init_clone(void)
{
for (uint8_t i=start+1;i<=end;i++)
packet[i]=0;
packet[start] = FrSkyX_RX_Seq << 4; //TX=8 at startup
packet[start] = FrSkyX_RX_Seq << 4;
#ifdef SPORT_SEND
if (FrSkyX_TX_IN_Seq!=0xFF)
{//RX has replied at least once

6
Multiprotocol/FrSkyD_cc2500.ino
View File

@ -203,11 +203,7 @@ uint16_t ReadFrSky_2way()
}
CC2500_Strobe(CC2500_SIDLE);
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[counter % 47]);
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); // Frequency offset hack
prev_option = option ;
}
CC2500_SetFreqOffset();
CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);
CC2500_Strobe(CC2500_SFRX);
frsky2way_data_frame();

6
Multiprotocol/FrSkyL_cc2500.ino
View File

@ -200,11 +200,7 @@ uint16_t ReadFrSkyL()
break;
case FRSKY_DATA1:
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); //Frequency offset hack
prev_option = option ;
}
CC2500_SetFreqOffset();
FrSkyX_set_start(hopping_frequency_no);
FrSkyL_build_packet();
FrSkyL_encode_packet(true);

6
Multiprotocol/FrSkyV_cc2500.ino
View File

@ -122,11 +122,7 @@ uint16_t ReadFRSKYV()
#endif
uint8_t chan = FRSKYV_calc_channel();
CC2500_Strobe(CC2500_SIDLE);
if (option != prev_option)
{
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
prev_option=option;
}
CC2500_SetFreqOffset();
CC2500_WriteReg(CC2500_0A_CHANNR, chan * 5 + 6);
FRSKYV_build_data_packet();

6
Multiprotocol/FrSkyX_cc2500.ino
View File

@ -142,11 +142,7 @@ uint16_t ReadFrSkyX()
case FRSKY_DATA1:
CC2500_Strobe(CC2500_SIDLE);
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0,option); //Frequency offset hack
prev_option = option ;
}
CC2500_SetFreqOffset();
FrSkyX_set_start(hopping_frequency_no);
FrSkyX_build_packet();
if(FrSkyFormat & 2)

1
Multiprotocol/Futaba_cc2500.ino
View File

@ -79,7 +79,6 @@ static void __attribute__((unused)) SFHSS_rf_init()
for (uint8_t i = 0; i < 39; ++i)
CC2500_WriteReg(i, pgm_read_byte_near(&SFHSS_init_values[i]));
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_SetTxRxMode(TX_EN);

1
Multiprotocol/HOTT_cc2500.ino
View File

@ -86,7 +86,6 @@ static void __attribute__((unused)) HOTT_rf_init()
for (uint8_t i = 0; i < 39; ++i)
CC2500_WriteReg(i, pgm_read_byte_near(&HOTT_init_values[i]));
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_SetTxRxMode(TX_EN);

1
Multiprotocol/Hitec_cc2500.ino
View File

@ -54,7 +54,6 @@ static void __attribute__((unused)) HITEC_CC2500_init()
for (uint8_t i = 0; i < 39; ++i)
CC2500_WriteReg(i, pgm_read_byte_near(&HITEC_init_values[i]));
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_SetTxRxMode(TX_EN);

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 2
#define VERSION_PATCH_LEVEL 11
#define VERSION_PATCH_LEVEL 12
//******************
// Protocols

7
Multiprotocol/OMP_cc2500.ino
View File

@ -30,7 +30,8 @@ Multiprotocol is distributed in the hope that it will be useful,
static void __attribute__((unused)) OMP_send_packet()
{
#ifdef OMP_HUB_TELEMETRY
if(option==0) option=1; // Select the CC2500 by default
if(option==0)
prev_option=option=1; // Select the CC2500 by default
PE1_off; PE2_on; // CC2500 antenna RF2
#endif
@ -110,7 +111,7 @@ static void __attribute__((unused)) OMP_init()
//Config CC2500
#ifdef OMP_HUB_TELEMETRY
if(option==0)
option=1; // Select the CC2500
prev_option=option=1; // Select the CC2500
#endif
XN297L_Init();
XN297L_SetTXAddr((uint8_t*)"FLPBD", 5);
@ -119,7 +120,7 @@ static void __attribute__((unused)) OMP_init()
#ifdef OMP_HUB_TELEMETRY
//Config NRF
option=0; // Select the NRF
prev_option=option=0; // Select the NRF
XN297L_Init();
XN297_Configure(_BV(NRF24L01_00_EN_CRC));
XN297_SetRXAddr(rx_tx_addr, 5); // Set the RX address

12
Multiprotocol/RadioLink_cc2500.ino
View File

@ -139,21 +139,11 @@ static void __attribute__((unused)) RLINK_rf_init()
CC2500_WriteReg(5, 0xDC);
}
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_SetTxRxMode(TX_EN);
}
static void __attribute__((unused)) RLINK_tune_freq()
{
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
prev_option = option ;
}
}
static void __attribute__((unused)) RLINK_send_packet()
{
static uint32_t pseudo=0;
@ -245,7 +235,7 @@ uint16_t RLINK_callback()
telemetry_set_input_sync(RLINK_TIMING_PROTO);
#endif
CC2500_SetPower();
RLINK_tune_freq();
CC2500_SetFreqOffset();
RLINK_send_packet();
#if not defined RLINK_HUB_TELEMETRY
return RLINK_TIMING_PROTO;

35
Multiprotocol/Redpine_cc2500.ino
View File

@ -98,11 +98,7 @@ static void REDPINE_data_frame() {
static uint16_t ReadREDPINE()
{
if ( prev_option != option )
{ // Frequency adjust
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
prev_option = option ;
}
CC2500_SetFreqOffset();
if(IS_BIND_IN_PROGRESS)
{
if (state == REDPINE_BIND) {
@ -122,22 +118,18 @@ static uint16_t ReadREDPINE()
}
return 4000;
}
else
{
#ifdef MULTI_SYNC
telemetry_set_input_sync(packet_period);
#endif
CC2500_SetTxRxMode(TX_EN);
REDPINE_set_channel(hopping_frequency_no);
CC2500_SetPower();
CC2500_Strobe(CC2500_SFRX);
REDPINE_data_frame();
CC2500_Strobe(CC2500_SIDLE);
hopping_frequency_no = (hopping_frequency_no + 1) % 49;
CC2500_WriteData(packet, REDPINE_PACKET_SIZE);
return packet_period;
}
return 1;
#ifdef MULTI_SYNC
telemetry_set_input_sync(packet_period);
#endif
CC2500_SetTxRxMode(TX_EN);
REDPINE_set_channel(hopping_frequency_no);
CC2500_SetPower();
CC2500_Strobe(CC2500_SFRX);
REDPINE_data_frame();
CC2500_Strobe(CC2500_SIDLE);
hopping_frequency_no = (hopping_frequency_no + 1) % 49;
CC2500_WriteData(packet, REDPINE_PACKET_SIZE);
return packet_period;
}
// register, fast 250k, slow
@ -189,7 +181,6 @@ static void REDPINE_init(uint8_t format)
CC2500_WriteReg(REDPINE_init_data[i][0], REDPINE_init_data[i][format+1]);
}
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_Strobe(CC2500_SIDLE);

7
Multiprotocol/Skyartec_cc2500.ino
View File

@ -54,7 +54,6 @@ static void __attribute__((unused)) SKYARTEC_rf_init()
for (uint8_t i = 4; i <= 0x2E; ++i)
CC2500_WriteReg(i, pgm_read_byte_near(&SKYARTEC_init_values[i-4]));
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CC2500_SetTxRxMode(TX_EN);
@ -130,11 +129,7 @@ uint16_t ReadSKYARTEC()
{
CC2500_SetPower();
// Tune frequency if it has been changed
if ( prev_option != option )
{
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
prev_option = option ;
}
CC2500_SetFreqOffset();
phase = SKYARTEC_PKT1;
}
else

1
Multiprotocol/WFLY2_a7105.ino
View File

@ -304,7 +304,6 @@ uint16_t initWFLY2()
rf_ch_num = 0;
bind_counter = WFLY2_BIND_COUNT;
phase = WFLY2_DATA;
prev_option = option;
#ifdef WFLY2_HUB_TELEMETRY
packet_count = 0;
telemetry_lost = 1;

1
Multiprotocol/WK2x01_cyrf6936.ino
View File

@ -477,7 +477,6 @@ uint16_t WK_setup()
packet_count = 0;
packet_sent = 0;
WK_last_beacon = 0;
prev_option=option;
if(sub_protocol!=WK2801 || option==0)
{
CYRF_GetMfgData(cyrfmfg_id);