diff --git a/docs/Advanced_Manually_Setting_ATmega328_Fuses.md b/docs/Advanced_Manually_Setting_ATmega328_Fuses.md
index 78500a0..1b971ed 100644
--- a/docs/Advanced_Manually_Setting_ATmega328_Fuses.md
+++ b/docs/Advanced_Manually_Setting_ATmega328_Fuses.md
@@ -4,20 +4,24 @@ First, the .hex files provided are only for tests purpose as the recommended met
 
 There are many different options to upload a .hex firmware file to the MULTI-Module and to set the correct fuses.  This document outlines an approach that uses a USBASP programmer and which is equally compatible with OSX, Windows and Linux operating systems.
 
+1. Follow this section: [Material you need to upload the firmware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling.md#material-you-need-to-upload-the-firmware)
 1. Follow this section: [Install the Arduino IDE](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling.md#install-the-arduino-ide-and-the-multiprotocol-project-firmware)
 1. Make sure to write down the location of your installation since you need to know where avrdude is installed to configure the AVR8 Burn-O-Mat. For example on a default windows installation, avrdude.exe is located in "C:\Program Files (x86)\Arduino\hardware\tools\avr\bin" where "C:\Program Files (x86)\Arduino" is the installation path.
-1. Follow this section: [Material you need to upload the firmware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling.md#material-you-need-to-upload-the-firmware)
-1. Follow this section: [Connect the programmer](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling.md#connect-the-programmer)
 1. Install [AVR8 Burn-O-Mat](http://avr8-burn-o-mat.brischalle.de/avr8_burn_o_mat_avrdude_gui_en.php) which is available for all platforms. Installation instructions are on the software page (Don't forget to install [Java](http://java.sun.com/javase/downloads) as explained).
 1. Launch AVR8 Burn-O-Mat.
 1. You should now have a window which looks like this: 
   <img src="images/AVR8BurnOMat-main.png" />
-1. click on **Settings->AVRDUDE** and fill in the details about avrdude location using the installation path written previously as well as selecting USBASP for the programmer: 
+1. Click on **Settings->AVRDUDE** and fill in the details about avrdude location using the installation path written previously as well as selecting USBASP for the programmer: 
   <img src="images/AVR8BurnOMat-settings.png" />
-1. 
+1. Once done click on OK
+1. You are now done with all the installations and ready to program your Multi-module
 
+1. Download the [latest release firmware](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases) you want to burn and store it in a knwon location
+1. Follow this section: [Connect the programmer](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Compiling.md#connect-the-programmer)
 
 ## Fuse settings
+The fuse settings have to be done only once for all.
+
 Here are some fuse settings for common configurations:
 
 Board|Low Fuse|High Fuse|Extended Fuse