diff --git a/Multiprotocol/A7105_SPI.ino b/Multiprotocol/A7105_SPI.ino
index a8da2ad..2a92464 100644
--- a/Multiprotocol/A7105_SPI.ino
+++ b/Multiprotocol/A7105_SPI.ino
@@ -145,7 +145,7 @@ static void A7105_SetPower_Value(int power)
 void A7105_SetPower()
 {
 	uint8_t power=A7105_BIND_POWER;
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		#ifdef A7105_ENABLE_LOW_POWER
 			power=IS_POWER_FLAG_on?A7105_HIGH_POWER:A7105_LOW_POWER;
 		#else
diff --git a/Multiprotocol/AFHDS2A_a7105.ino b/Multiprotocol/AFHDS2A_a7105.ino
index 15fa0cf..773c15a 100644
--- a/Multiprotocol/AFHDS2A_a7105.ino
+++ b/Multiprotocol/AFHDS2A_a7105.ino
@@ -350,7 +350,7 @@ uint16_t initAFHDS2A()
 	AFHDS2A_calc_channels();
 	packet_count = 0;
 	bind_phase = 0;
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 		phase = AFHDS2A_BIND1;
 	else
 	{
diff --git a/Multiprotocol/ASSAN_nrf24l01.ino b/Multiprotocol/ASSAN_nrf24l01.ino
index 2435bab..aa34ac0 100644
--- a/Multiprotocol/ASSAN_nrf24l01.ino
+++ b/Multiprotocol/ASSAN_nrf24l01.ino
@@ -175,7 +175,7 @@ uint16_t initASSAN()
 	ASSAN_init();
 	hopping_frequency_no = 0;
 
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 		phase=ASSAN_BIND0;
 	else 
 		phase=ASSAN_DATA0;
diff --git a/Multiprotocol/Bayang_nrf24l01.ino b/Multiprotocol/Bayang_nrf24l01.ino
index 0661625..92241e8 100644
--- a/Multiprotocol/Bayang_nrf24l01.ino
+++ b/Multiprotocol/Bayang_nrf24l01.ino
@@ -247,7 +247,7 @@ static void __attribute__((unused)) BAYANG_init()
 
 uint16_t BAYANG_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 	{
 		if(packet_count==0)
 			BAYANG_send_packet(0);
diff --git a/Multiprotocol/CABELL_nrf224l01.ino b/Multiprotocol/CABELL_nrf224l01.ino
index 6c50ba8..2741feb 100644
--- a/Multiprotocol/CABELL_nrf224l01.ino
+++ b/Multiprotocol/CABELL_nrf224l01.ino
@@ -332,7 +332,7 @@ static void __attribute__((unused)) CABELL_setAddress()
 
 	//  Serial.print("NORM ID: ");Serial.print((uint32_t)(CABELL_normal_addr>>32)); Serial.print("    ");Serial.println((uint32_t)((CABELL_normal_addr<<32)>>32));
 
-	if (IS_BIND_DONE_on)
+	if (IS_BIND_DONE)
 	{
 		CABELL_addr = (((uint64_t)rx_tx_addr[0]) << 32) + 
 			(((uint64_t)rx_tx_addr[1]) << 24) + 
@@ -386,7 +386,7 @@ static void CABELL_SetPower()    // This over-ride the standard Set Power to all
                           // Note that on many modules max power may actually be worse than the normal high power setting
                           // test and only use max if it helps the range
 {
-	if(IS_BIND_DONE_on && !IS_RANGE_FLAG_on && ((option & CABELL_OPTION_MASK_MAX_POWER_OVERRIDE) != 0))
+	if(IS_BIND_DONE && !IS_RANGE_FLAG_on && ((option & CABELL_OPTION_MASK_MAX_POWER_OVERRIDE) != 0))
 	{   // If we are not in range or bind mode and power setting override is in effect, then set max power, else standard power logic
 		if(prev_power != NRF_POWER_3)   // prev_power is global variable for NRF24L01; NRF_POWER_3 is max power
 		{
@@ -403,7 +403,7 @@ static void CABELL_SetPower()    // This over-ride the standard Set Power to all
 //-----------------------------------------------------------------------------------------
 uint16_t CABELL_callback()
 {
-	if (IS_BIND_DONE_on)
+	if (IS_BIND_DONE)
 	{
 		CABELL_send_packet(0);  // packet_period is set/adjusted in CABELL_send_packet
 		return packet_period;
@@ -424,7 +424,7 @@ uint16_t CABELL_callback()
 //-----------------------------------------------------------------------------------------
 uint16_t initCABELL(void)
 {
-	if (IS_BIND_DONE_on)
+	if (IS_BIND_DONE)
 		bind_counter = 0;
 	else  
 		bind_counter = CABELL_BIND_COUNT;
diff --git a/Multiprotocol/CC2500_SPI.ino b/Multiprotocol/CC2500_SPI.ino
index 00fa551..af726ca 100644
--- a/Multiprotocol/CC2500_SPI.ino
+++ b/Multiprotocol/CC2500_SPI.ino
@@ -144,7 +144,7 @@ static void CC2500_SetPower_Value(uint8_t power)
 void CC2500_SetPower()
 {
 	uint8_t power=CC2500_BIND_POWER;
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		#ifdef CC2500_ENABLE_LOW_POWER
 			power=IS_POWER_FLAG_on?CC2500_HIGH_POWER:CC2500_LOW_POWER;
 		#else
diff --git a/Multiprotocol/CG023_nrf24l01.ino b/Multiprotocol/CG023_nrf24l01.ino
index 870fda6..6cd4a96 100644
--- a/Multiprotocol/CG023_nrf24l01.ino
+++ b/Multiprotocol/CG023_nrf24l01.ino
@@ -137,7 +137,7 @@ static void __attribute__((unused)) CG023_init()
 
 uint16_t CG023_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		CG023_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/CYRF6936_SPI.ino b/Multiprotocol/CYRF6936_SPI.ino
index 276e8bb..bcc0d6c 100644
--- a/Multiprotocol/CYRF6936_SPI.ino
+++ b/Multiprotocol/CYRF6936_SPI.ino
@@ -136,7 +136,7 @@ static void CYRF_SetPower_Value(uint8_t power)
 void CYRF_SetPower(uint8_t val)
 {
 	uint8_t power=CYRF_BIND_POWER;
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		#ifdef CYRF6936_ENABLE_LOW_POWER
 			power=IS_POWER_FLAG_on?CYRF_HIGH_POWER:CYRF_LOW_POWER;
 		#else
diff --git a/Multiprotocol/Corona_cc2500.ino b/Multiprotocol/Corona_cc2500.ino
new file mode 100644
index 0000000..c3a46ee
--- /dev/null
+++ b/Multiprotocol/Corona_cc2500.ino
@@ -0,0 +1,230 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#if defined(CORONA_CC2500_INO)
+
+#include "iface_cc2500.h"
+
+//#define CORONA_FORCE_ID
+
+#define CORONA_RF_NUM_CHANNELS	3
+#define CORONA_ADDRESS_LENGTH	4
+#define CORONA_BIND_CHANNEL_V1	0xD1
+#define CORONA_BIND_CHANNEL_V2	0xB8
+#define CORONA_COARSE			0x00
+
+
+const PROGMEM uint8_t CORONA_init_values[] = {
+  /* 00 */ 0x29, 0x2E, 0x06, 0x07, 0xD3, 0x91, 0xFF, 0x04,
+  /* 08 */ 0x05, 0x00, CORONA_BIND_CHANNEL_V1, 0x06, 0x00, 0x5C, 0x4E, 0xC4 + CORONA_COARSE,
+  /* 10 */ 0x5B, 0xF8, 0x03, 0x23, 0xF8, 0x47, 0x07, 0x30,
+  /* 18 */ 0x18, 0x16, 0x6C, 0x43, 0x40, 0x91, 0x87, 0x6B,
+  /* 20 */ 0xF8, 0x56, 0x10, 0xA9, 0x0A, 0x00, 0x11, 0x41,
+  /* 28 */ 0x00, 0x59, 0x7F, 0x3F, 0x81, 0x35, 0x0B
+};
+
+static void __attribute__((unused)) CORONA_rf_init()
+{
+	CC2500_Strobe(CC2500_SIDLE);
+
+	for (uint8_t i = 0; i <= 0x2E; ++i)
+		CC2500_WriteReg(i, pgm_read_byte_near(&CORONA_init_values[i]));
+	if(sub_protocol!=COR_V1)
+	{
+		CC2500_WriteReg(CC2500_0A_CHANNR, CORONA_BIND_CHANNEL_V2);
+		CC2500_WriteReg(CC2500_0E_FREQ1, 0x80);
+		CC2500_WriteReg(CC2500_0F_FREQ0, 0x00 + CORONA_COARSE);
+		CC2500_WriteReg(CC2500_15_DEVIATN, 0x50);
+		CC2500_WriteReg(CC2500_17_MCSM1, 0x00);
+	    CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0x67);
+		CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0xFB);
+		CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xDC);
+	}
+	
+	prev_option = option;
+	CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
+
+	//not sure what they are doing to the PATABLE since basically only the first byte is used and it's only 8 bytes long. So I think they end up filling the PATABLE fully with 0xFF
+	CC2500_WriteRegisterMulti(CC2500_3E_PATABLE,(const uint8_t *)"\x08\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF", 13);
+
+	CC2500_SetTxRxMode(TX_EN);
+	CC2500_SetPower();
+}
+
+// Generate id and hopping freq
+static void __attribute__((unused)) CORONA_init()
+{
+	#ifdef CORONA_FORCE_ID
+		// Example of ID and channels taken from dumps
+		if(sub_protocol==COR_V1)
+		{
+			memcpy((void *)rx_tx_addr,(void *)"\x1F\xFE\x6C\x35",CORONA_ADDRESS_LENGTH);
+			memcpy((void *)hopping_frequency,(void *)"\x17\x0D\x03\x49",CORONA_RF_NUM_CHANNELS+1);
+		}
+		else
+		{
+			memcpy((void *)rx_tx_addr,(void *)"\xFE\xFE\x02\xFB",CORONA_ADDRESS_LENGTH);
+			memcpy((void *)hopping_frequency,(void *)"\x14\x3D\x35",CORONA_RF_NUM_CHANNELS);
+		}
+	#else
+		// From dumps channels are anything between 0x00 and 0xC5 on V1.
+		// But 0x00 and 0xB8 should be avoided on V2 since they are used for bind.
+		// Below code make sure channels are between 0x02 and 0xA0, spaced with a minimum of 2 and not ordered (RX only use the 1st channel unless there is an issue).
+		uint8_t order=rx_tx_addr[3]&0x03;
+		for(uint8_t i=0; i<CORONA_RF_NUM_CHANNELS+1; i++)
+			hopping_frequency[i^order]=2+rx_tx_addr[3-i]%39+(i<<5)+(i<<3);
+
+		// ID looks random but on the 15 V1 dumps they all show the same odd/even rule
+		if(rx_tx_addr[3]&0x01)
+		{	// If [3] is odd then [0] is odd and [2] is even 
+			rx_tx_addr[0]|=0x01;
+			rx_tx_addr[2]&=0xFE;
+		}
+		else
+		{	// If [3] is even then [0] is even and [2] is odd 
+			rx_tx_addr[0]&=0xFE;
+			rx_tx_addr[2]|=0x01;
+		}
+		rx_tx_addr[1]=0xFE;			// Always FE in the dumps of V1 and V2
+	#endif
+}
+
+// 8 Channels with direct values from PPM
+static void __attribute__((unused)) CORONA_send_packet()
+{
+	if(IS_BIND_DONE)
+	{	
+		if(state==0 || sub_protocol==COR_V1)
+		{	// Build standard packet
+			packet[0] = 0x10;		// 17 bytes to follow
+			
+			//Channels
+			memset(packet+9, 0x00, 4);
+			for(uint8_t i=0; i<8; i++)
+			{	// Channel values are packed
+				packet[i+1] = Servo_data[i];
+				packet[9 + (i>>1)] |= (i&0x01)?(Servo_data[i]>>4)&0xF0:(Servo_data[i]>>8)&0x0F;
+			}
+
+			//TX ID
+			for(uint8_t i=0; i<CORONA_ADDRESS_LENGTH; i++)
+				packet[i+13] = rx_tx_addr[i];
+			
+			packet[17] = 0x00;
+
+			// Tune frequency if it has been changed
+			if ( prev_option != option )
+			{
+				CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
+				prev_option = option ;
+			}
+			// Packet period is based on hopping
+			switch(hopping_frequency_no)
+			{
+				case 0:
+					packet_period=sub_protocol==COR_V1?4991:4248;
+					break;
+				case 1:
+					packet_period=sub_protocol==COR_V1?4991:4345;
+					break;
+				case 2:
+					packet_period=sub_protocol==COR_V1?12520:13468;
+					if(sub_protocol!=COR_V1)
+						packet[17] = 0x03;
+					break;
+			}
+			// Set channel
+			CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[hopping_frequency_no]);
+			hopping_frequency_no++;
+			hopping_frequency_no%=CORONA_RF_NUM_CHANNELS;
+			// Update power
+			CC2500_SetPower();
+		}
+		else
+		{	// Send identifier packet for 2.65sec. This is how the RX learns the hopping table after a bind. Why it's not part of the bind like V1 is a mistery...
+			state--;
+			packet[0]=0x07;		// 8 bytes to follow
+			// Send hopping freq
+			for(uint8_t i=0; i<CORONA_RF_NUM_CHANNELS; i++)
+				packet[i+1]=hopping_frequency[i];
+			// Send TX ID
+			for(uint8_t i=0; i<CORONA_ADDRESS_LENGTH; i++)
+				packet[i+4]=rx_tx_addr[i];
+			packet[8]=0;
+			packet_period=6647;
+			// Set channel
+			CC2500_WriteReg(CC2500_0A_CHANNR, 0x00);
+		}
+	}
+	else
+	{	// Build bind packets
+		if(sub_protocol==COR_V1)
+		{	// V1
+			if(bind_counter&1)
+			{ // Send TX ID
+				packet[0]=0x04;		// 5 bytes to follow
+				for(uint8_t i=0; i<CORONA_ADDRESS_LENGTH; i++)
+					packet[i+1]=rx_tx_addr[i];
+				packet[5]=0xCD;		// Unknown but seems to be always the same value for V1
+				packet_period=3689;
+			}
+			else
+			{ // Send hopping freq
+				packet[0]=0x03;		// 4 bytes to follow
+				for(uint8_t i=0; i<CORONA_RF_NUM_CHANNELS+1; i++)
+					packet[i+1]=hopping_frequency[i];
+				// Not sure what the last byte (+1) is for now since only the first 3 channels are used...
+				packet_period=3438;
+			}
+		}
+		else
+		{	// V2
+			packet[0]=0x04;		// 5 bytes to follow
+			for(uint8_t i=0; i<CORONA_ADDRESS_LENGTH; i++)
+				packet[i+1]=rx_tx_addr[i];
+			packet[5]=0x00;		// Unknown but seems to be always the same value for V2
+			packet_period=26791;
+		}
+	}
+    // Send packet
+	CC2500_WriteData(packet, packet[0]+2);
+}
+
+uint16_t ReadCORONA()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		bind_counter--;
+		if (bind_counter == 0)
+			BIND_DONE;
+	}
+	CORONA_send_packet();
+	return packet_period;
+}
+
+uint16_t initCORONA()
+{
+	if(sub_protocol==COR_V1)
+		bind_counter=700;		// Stay in bind mode for 5s
+	else
+		bind_counter=187;		// Stay in bind mode for 5s
+	state=400;					// Used by V2 to send RF channels + ID for 2.65s at startup
+	hopping_frequency_no=0;
+	CORONA_init();
+	CORONA_rf_init();
+	return 10000;
+}
+
+#endif
\ No newline at end of file
diff --git a/Multiprotocol/DM002_nrf24l01.ino b/Multiprotocol/DM002_nrf24l01.ino
index 5bf414c..9c9ca55 100644
--- a/Multiprotocol/DM002_nrf24l01.ino
+++ b/Multiprotocol/DM002_nrf24l01.ino
@@ -112,7 +112,7 @@ static void __attribute__((unused)) DM002_init()
 
 uint16_t DM002_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		DM002_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/DSM_cyrf6936.ino b/Multiprotocol/DSM_cyrf6936.ino
index 6b4aef1..f1d3a4c 100644
--- a/Multiprotocol/DSM_cyrf6936.ino
+++ b/Multiprotocol/DSM_cyrf6936.ino
@@ -566,9 +566,8 @@ uint16_t initDsm()
 	//
 	DSM_update_channels();
 	//
-	if(IS_AUTOBIND_FLAG_on )
+	if(IS_BIND_IN_PROGRESS)
 	{
-		BIND_IN_PROGRESS;
 		DSM_initialize_bind_phase();		
 		phase = DSM_BIND_WRITE;
 		bind_counter=DSM_BIND_COUNT;
diff --git a/Multiprotocol/Devo_cyrf6936.ino b/Multiprotocol/Devo_cyrf6936.ino
index 4a33660..fccc698 100644
--- a/Multiprotocol/Devo_cyrf6936.ino
+++ b/Multiprotocol/Devo_cyrf6936.ino
@@ -57,7 +57,7 @@ static void __attribute__((unused)) DEVO_add_pkt_suffix()
 {
     uint8_t bind_state;
 	#ifdef ENABLE_PPM
-	if(mode_select && option==0 && IS_BIND_DONE_on) 			//PPM mode and option not already set and bind is finished
+	if(mode_select && option==0 && IS_BIND_DONE) 			//PPM mode and option not already set and bind is finished
 	{
 		BIND_SET_INPUT;
 		BIND_SET_PULLUP;										// set pullup
@@ -69,7 +69,7 @@ static void __attribute__((unused)) DEVO_add_pkt_suffix()
 		BIND_SET_OUTPUT;
 	}
 	#endif //ENABLE_PPM
-    if(prev_option!=option && IS_BIND_DONE_on)
+    if(prev_option!=option && IS_BIND_DONE)
 	{
 		MProtocol_id = RX_num + MProtocol_id_master;
 		bind_counter=DEVO_BIND_COUNT;
diff --git a/Multiprotocol/ESky150_nrf24l01.ino b/Multiprotocol/ESky150_nrf24l01.ino
index d153a1b..eee07ef 100644
--- a/Multiprotocol/ESky150_nrf24l01.ino
+++ b/Multiprotocol/ESky150_nrf24l01.ino
@@ -150,7 +150,7 @@ uint8_t ESKY150_convert_2bit_channel(uint8_t num)
 
 uint16_t ESKY150_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		ESKY150_send_packet();
 	else
 	{
@@ -169,7 +169,7 @@ uint16_t ESKY150_callback()
 uint16_t initESKY150(void)
 {
 	ESKY150_init();
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		bind_counter=3000;
 		ESKY150_bind_init();
diff --git a/Multiprotocol/ESky_nrf24l01.ino b/Multiprotocol/ESky_nrf24l01.ino
index 80fdd85..1a0eaee 100644
--- a/Multiprotocol/ESky_nrf24l01.ino
+++ b/Multiprotocol/ESky_nrf24l01.ino
@@ -138,7 +138,7 @@ static void __attribute__((unused)) ESKY_send_packet(uint8_t bind)
 
 uint16_t ESKY_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 	{
 		if (packet_sent && NRF24L01_packet_ack() != PKT_ACKED)
 			return ESKY_PACKET_CHKTIME;
@@ -162,7 +162,7 @@ uint16_t initESKY(void)
 {
 	bind_counter = ESKY_BIND_COUNT;
 	rx_tx_addr[3] = 0xBB;
-	ESKY_init(IS_AUTOBIND_FLAG_on);
+	ESKY_init(IS_BIND_IN_PROGRESS);
 	ESKY_init2();
 	return 50000;
 }
diff --git a/Multiprotocol/FlySky_a7105.ino b/Multiprotocol/FlySky_a7105.ino
index a9ef580..a849b14 100644
--- a/Multiprotocol/FlySky_a7105.ino
+++ b/Multiprotocol/FlySky_a7105.ino
@@ -234,7 +234,7 @@ uint16_t initFlySky()
 	}
 	hopping_frequency_no=0;
 	packet_count=0;
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 		bind_counter = FLYSKY_BIND_COUNT;
 	else
 		bind_counter = 0;
diff --git a/Multiprotocol/FrSkyD_cc2500.ino b/Multiprotocol/FrSkyD_cc2500.ino
index d3a57c5..9cfabf0 100644
--- a/Multiprotocol/FrSkyD_cc2500.ino
+++ b/Multiprotocol/FrSkyD_cc2500.ino
@@ -100,7 +100,7 @@ uint16_t initFrSky_2way()
 	#if defined TELEMETRY
 		init_frskyd_link_telemetry();
 	#endif
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 	{
 		frsky2way_init(1);
 		state = FRSKY_BIND;
@@ -122,7 +122,7 @@ uint16_t ReadFrSky_2way()
 		CC2500_WriteReg(CC2500_23_FSCAL3, 0x89);		
 		CC2500_Strobe(CC2500_SFRX);//0x3A
 		CC2500_WriteData(packet, packet[0]+1);
-		if(IS_BIND_DONE_on)
+		if(IS_BIND_DONE)
 			state = FRSKY_BIND_DONE;
 		else
 			state++;
diff --git a/Multiprotocol/FrSkyV_cc2500.ino b/Multiprotocol/FrSkyV_cc2500.ino
index 1e0c7d5..f277b2c 100644
--- a/Multiprotocol/FrSkyV_cc2500.ino
+++ b/Multiprotocol/FrSkyV_cc2500.ino
@@ -115,7 +115,7 @@ static void __attribute__((unused)) FRSKYV_build_data_packet()
 
 uint16_t ReadFRSKYV()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 	{	// Normal operation
 		uint8_t chan = FRSKYV_calc_channel();
 		CC2500_Strobe(CC2500_SIDLE);
diff --git a/Multiprotocol/FrSkyX_cc2500.ino b/Multiprotocol/FrSkyX_cc2500.ino
index 7ec1895..8cc7d8b 100644
--- a/Multiprotocol/FrSkyX_cc2500.ino
+++ b/Multiprotocol/FrSkyX_cc2500.ino
@@ -243,7 +243,7 @@ uint16_t ReadFrSkyX()
 			frskyX_build_bind_packet();
 			CC2500_Strobe(CC2500_SIDLE);
 			CC2500_WriteData(packet, packet[0]+1);
-			if(IS_BIND_DONE_on)
+			if(IS_BIND_DONE)
 				state = FRSKY_BIND_DONE;
 			else
 				state++;
@@ -334,7 +334,7 @@ uint16_t initFrSkyX()
 	//************************
 	frskyX_init();
 	//
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 	{	   
 		state = FRSKY_BIND;
 		frskyX_initialize_data(1);
diff --git a/Multiprotocol/H8_3D_nrf24l01.ino b/Multiprotocol/H8_3D_nrf24l01.ino
index d090213..01c94f0 100644
--- a/Multiprotocol/H8_3D_nrf24l01.ino
+++ b/Multiprotocol/H8_3D_nrf24l01.ino
@@ -176,7 +176,7 @@ static void __attribute__((unused)) H8_3D_init()
 
 uint16_t H8_3D_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		H8_3D_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/Hisky_nrf24l01.ino b/Multiprotocol/Hisky_nrf24l01.ino
index 6b09ba5..bd42296 100644
--- a/Multiprotocol/Hisky_nrf24l01.ino
+++ b/Multiprotocol/Hisky_nrf24l01.ino
@@ -253,7 +253,7 @@ uint16_t initHiSky()
 	hopping_frequency_no = 0;
 	binding_idx = 0;
 
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
 		bind_counter = HISKY_BIND_COUNT;
 	else 
 		bind_counter = 0;
diff --git a/Multiprotocol/Hubsan_a7105.ino b/Multiprotocol/Hubsan_a7105.ino
index 0a1cfda..5117a0b 100644
--- a/Multiprotocol/Hubsan_a7105.ino
+++ b/Multiprotocol/Hubsan_a7105.ino
@@ -428,7 +428,7 @@ uint16_t initHubsan()
 	channel = allowed_ch[MProtocol_id % sizeof(allowed_ch)];
 	hubsan_id_data=ID_NORMAL;
 
-	if(IS_AUTOBIND_FLAG_on || sub_protocol==H107)
+	if(IS_BIND_IN_PROGRESS || sub_protocol==H107)
 	{
 		BIND_IN_PROGRESS;	// autobind protocol
 		phase = BIND_1;
diff --git a/Multiprotocol/J6Pro_cyrf6936.ino b/Multiprotocol/J6Pro_cyrf6936.ino
index 1846716..ff8b43f 100644
--- a/Multiprotocol/J6Pro_cyrf6936.ino
+++ b/Multiprotocol/J6Pro_cyrf6936.ino
@@ -227,7 +227,7 @@ uint16_t initJ6Pro()
 {
     j6pro_cyrf_init();
 
-	if(IS_AUTOBIND_FLAG_on)
+	if(IS_BIND_IN_PROGRESS)
         phase = J6PRO_BIND;
     else
         phase = J6PRO_CHANSEL;
diff --git a/Multiprotocol/KN_nrf24l01.ino b/Multiprotocol/KN_nrf24l01.ino
index 14e9566..43f5959 100644
--- a/Multiprotocol/KN_nrf24l01.ino
+++ b/Multiprotocol/KN_nrf24l01.ino
@@ -287,7 +287,7 @@ uint16_t initKN()
 		packet_count  = KN_FX_PACKET_SEND_COUNT;
 	}
 	kn_init();
-	phase = IS_AUTOBIND_FLAG_on ? KN_PHASE_PRE_BIND : KN_PHASE_PRE_SEND;
+	phase = IS_BIND_IN_PROGRESS ? KN_PHASE_PRE_BIND : KN_PHASE_PRE_SEND;
 
 	return KN_INIT_WAIT_MS;
 }
diff --git a/Multiprotocol/MJXQ_nrf24l01.ino b/Multiprotocol/MJXQ_nrf24l01.ino
index bb21678..c54d58b 100644
--- a/Multiprotocol/MJXQ_nrf24l01.ino
+++ b/Multiprotocol/MJXQ_nrf24l01.ino
@@ -299,7 +299,7 @@ static void __attribute__((unused)) MJXQ_initialize_txid()
 
 uint16_t MJXQ_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		MJXQ_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/MT99xx_nrf24l01.ino b/Multiprotocol/MT99xx_nrf24l01.ino
index 705a77c..0f3e37b 100644
--- a/Multiprotocol/MT99xx_nrf24l01.ino
+++ b/Multiprotocol/MT99xx_nrf24l01.ino
@@ -221,7 +221,7 @@ static void __attribute__((unused)) MT99XX_initialize_txid()
 
 uint16_t MT99XX_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		MT99XX_send_packet();
 	else
 	{
diff --git a/Multiprotocol/Multi.txt b/Multiprotocol/Multi.txt
index 772c83e..fe0a574 100644
--- a/Multiprotocol/Multi.txt
+++ b/Multiprotocol/Multi.txt
@@ -34,3 +34,5 @@
 34,CABELL,CAB_V3,C_TELEM,-,-,-,-,F_SAFE,UNBIND
 35,ESKY150
 36,H8_3D,H8_3D,H20H,H20Mini,H30Mini
+37,CORONA,COR_V1,COR_V2
+
diff --git a/Multiprotocol/Multiprotocol.h b/Multiprotocol/Multiprotocol.h
index 0b79894..a40bcd9 100644
--- a/Multiprotocol/Multiprotocol.h
+++ b/Multiprotocol/Multiprotocol.h
@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		2
 #define VERSION_REVISION	0
-#define VERSION_PATCH_LEVEL	0
+#define VERSION_PATCH_LEVEL	4
 //******************
 // Protocols
 //******************
@@ -62,6 +62,7 @@ enum PROTOCOLS
 	MODE_CABELL		= 34,	// =>NRF24L01
 	MODE_ESKY150	= 35,	// =>NRF24L01
 	MODE_H8_3D		= 36,	// =>NRF24L01
+	MODE_CORONA		= 37,	// =>CC2500
 };
 
 enum Flysky
@@ -219,6 +220,11 @@ enum H8_3D
 	H20MINI	= 2,
 	H30MINI	= 3,
 };
+enum CORONA
+{
+	COR_V1	= 0,
+	COR_V2	= 1,
+};
 
 #define NONE 		0
 #define P_HIGH		1
@@ -287,7 +293,8 @@ enum MultiPacketTypes
 //Bind flag
 #define BIND_IN_PROGRESS	protocol_flags &= ~_BV(7)
 #define BIND_DONE			protocol_flags |= _BV(7)
-#define IS_BIND_DONE_on		( ( protocol_flags & _BV(7) ) !=0 )
+#define IS_BIND_DONE		( ( protocol_flags & _BV(7) ) !=0 )
+#define IS_BIND_IN_PROGRESS	( ( protocol_flags & _BV(7) ) ==0 )
 //
 #define FAILSAFE_VALUES_off	protocol_flags2 &= ~_BV(0)
 #define FAILSAFE_VALUES_on		protocol_flags2 |= _BV(0)
@@ -540,6 +547,7 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 					CABELL		34
 					ESKY150		35
 					H8_3D		36
+					CORONA		37
    BindBit=>		0x80	1=Bind/0=No
    AutoBindBit=>	0x40	1=Yes /0=No
    RangeCheck=>		0x20	1=Yes /0=No
@@ -656,6 +664,9 @@ Serial: 100000 Baud 8e2      _ xxxx xxxx p --
 			H20H		1
 			H20MINI		2
 			H30MINI		3
+		sub_protocol==CORONA
+			COR_V1		0
+			COR_V2		1
 
    Power value => 0x80	0=High/1=Low
   Stream[3]   = option_protocol;
diff --git a/Multiprotocol/Multiprotocol.ino b/Multiprotocol/Multiprotocol.ino
index 01e186e..05988e9 100644
--- a/Multiprotocol/Multiprotocol.ino
+++ b/Multiprotocol/Multiprotocol.ino
@@ -338,7 +338,12 @@ void setup()
 	
 	// Read status of bind button
 	if( IS_BIND_BUTTON_on )
-		BIND_BUTTON_FLAG_on;	// If bind button pressed save the status for protocol id reset under hubsan
+	{
+		BIND_BUTTON_FLAG_on;	// If bind button pressed save the status
+		BIND_IN_PROGRESS;		// Request bind
+	}
+	else
+		BIND_DONE;
 
 	// Read status of mode select binary switch
 	// after this mode_select will be one of {0000, 0001, ..., 1111}
@@ -397,28 +402,37 @@ void setup()
 		//Forced frequency tuning values for CC2500 protocols
 		#if defined(FORCE_FRSKYD_TUNING) && defined(FRSKYD_CC2500_INO)
 			if(protocol==MODE_FRSKYD) 
-				option			=	FORCE_FRSKYD_TUNING;   // Use config-defined tuning value for FrSkyD
+				option			=	FORCE_FRSKYD_TUNING;		// Use config-defined tuning value for FrSkyD
 			else
 		#endif
 		#if defined(FORCE_FRSKYV_TUNING) && defined(FRSKYV_CC2500_INO)
 			if(protocol==MODE_FRSKYV)
-				option			=	FORCE_FRSKYV_TUNING;   // Use config-defined tuning value for FrSkyV
+				option			=	FORCE_FRSKYV_TUNING;		// Use config-defined tuning value for FrSkyV
 			else
 		#endif
 		#if defined(FORCE_FRSKYX_TUNING) && defined(FRSKYX_CC2500_INO)
 			if(protocol==MODE_FRSKYX)
-				option			=	FORCE_FRSKYX_TUNING;   // Use config-defined tuning value for FrSkyX
+				option			=	FORCE_FRSKYX_TUNING;		// Use config-defined tuning value for FrSkyX
 			else
 		#endif 
 		#if defined(FORCE_SFHSS_TUNING) && defined(SFHSS_CC2500_INO)
 			if (protocol==MODE_SFHSS)
-				option			=	FORCE_SFHSS_TUNING;    // Use config-defined tuning value for SFHSS
+				option			=	FORCE_SFHSS_TUNING;			// Use config-defined tuning value for SFHSS
 			else
 		#endif
-				option			=	PPM_prot[mode_select].option;   // Use radio-defined option value
+		#if defined(FORCE_CORONA_TUNING) && defined(CORONA_CC2500_INO)
+			if (protocol==MODE_CORONA)
+				option			=	FORCE_CORONA_TUNING;		// Use config-defined tuning value for CORONA
+			else
+		#endif
+				option			=	PPM_prot[mode_select].option;	// Use radio-defined option value
 
 		if(PPM_prot[mode_select].power)		POWER_FLAG_on;
-		if(PPM_prot[mode_select].autobind)	AUTOBIND_FLAG_on;
+		if(PPM_prot[mode_select].autobind)
+		{
+			AUTOBIND_FLAG_on;
+			BIND_IN_PROGRESS;	// Force a bind at protocol startup
+		}
 		mode_select++;
 		servo_max_100=PPM_MAX_100; servo_min_100=PPM_MIN_100;
 		servo_max_125=PPM_MAX_125; servo_min_125=PPM_MIN_125;
@@ -594,12 +608,14 @@ uint8_t Update_All()
 	#ifdef ENABLE_BIND_CH
 		if(IS_AUTOBIND_FLAG_on && IS_BIND_CH_PREV_off && Servo_data[BIND_CH-1]>PPM_MAX_COMMAND && Servo_data[THROTTLE]<(servo_min_100+25))
 		{ // Autobind is on and BIND_CH went up and Throttle is low
-			CHANGE_PROTOCOL_FLAG_on;							//reload protocol to rebind
+			CHANGE_PROTOCOL_FLAG_on;							//reload protocol
+			BIND_IN_PROGRESS;									//enable bind
 			BIND_CH_PREV_on;
 		}
-		if(IS_BIND_CH_PREV_on && Servo_data[BIND_CH-1]<PPM_MIN_COMMAND)
-		{
+		if(IS_AUTOBIND_FLAG_on && IS_BIND_CH_PREV_on && Servo_data[BIND_CH-1]<PPM_MIN_COMMAND)
+		{ // Autobind is on and BIND_CH went down
 			BIND_CH_PREV_off;
+			//Request protocol to terminate bind
 			#if defined(FRSKYD_CC2500_INO) || defined(FRSKYX_CC2500_INO) || defined(FRSKYV_CC2500_INO)
 			if(protocol==MODE_FRSKYD || protocol==MODE_FRSKYX || protocol==MODE_FRSKYV)
 				BIND_DONE;
@@ -674,7 +690,7 @@ static void update_led_status(void)
 				}
 				else
 				{
-					if(IS_BIND_DONE_on)
+					if(IS_BIND_DONE)
 						LED_off;							//bind completed force led on
 					blink+=BLINK_BIND_TIME;					//blink fastly during binding
 				}
@@ -773,13 +789,6 @@ static void protocol_init()
 	
 		blink=millis();
 
-		if(IS_BIND_BUTTON_FLAG_on)
-			AUTOBIND_FLAG_on;
-		if(IS_AUTOBIND_FLAG_on)
-			BIND_IN_PROGRESS;			// Indicates bind in progress for blinking bind led
-		else
-			BIND_DONE;
-
 		PE1_on;							//NRF24L01 antenna RF3 by default
 		PE2_off;						//NRF24L01 antenna RF3 by default
 		
@@ -842,6 +851,14 @@ static void protocol_init()
 						remote_callback = ReadSFHSS;
 						break;
 				#endif
+				#if defined(CORONA_CC2500_INO)
+					case MODE_CORONA:
+						PE1_off;	//antenna RF2
+						PE2_on;
+						next_callback = initCORONA();
+						remote_callback = ReadCORONA;
+						break;
+				#endif
 			#endif
 			#ifdef CYRF6936_INSTALLED
 				#if defined(DSM_CYRF6936_INO)
@@ -1050,8 +1067,8 @@ static void protocol_init()
 	}
 
 	#if defined(WAIT_FOR_BIND) && defined(ENABLE_BIND_CH)
-		if( IS_AUTOBIND_FLAG_on && ! ( IS_BIND_CH_PREV_on || IS_BIND_BUTTON_FLAG_on || (cur_protocol[1]&0x80)!=0 ) )
-		{
+		if( IS_AUTOBIND_FLAG_on && IS_BIND_CH_PREV_off && (cur_protocol[1]&0x80)==0 && mode_select == MODE_SERIAL)
+		{ // Autobind is active but no bind requested by either BIND_CH or BIND. But do not wait if in PPM mode...
 			WAIT_BIND_on;
 			return;
 		}
@@ -1084,7 +1101,7 @@ void update_serial_data()
 		RANGE_FLAG_on;
 	else
 		RANGE_FLAG_off;
-	if(rx_ok_buff[1]&0xC0)						//check autobind(0x40) & bind(0x80) together
+	if(rx_ok_buff[1]&0x40)						//check autobind
 		AUTOBIND_FLAG_on;
 	else
 		AUTOBIND_FLAG_off;
@@ -1096,30 +1113,35 @@ void update_serial_data()
 	//Forced frequency tuning values for CC2500 protocols
 	#if defined(FORCE_FRSKYD_TUNING) && defined(FRSKYD_CC2500_INO)
 		if(protocol==MODE_FRSKYD) 
-			option=FORCE_FRSKYD_TUNING;   // Use config-defined tuning value for FrSkyD
+			option=FORCE_FRSKYD_TUNING;	// Use config-defined tuning value for FrSkyD
 		else
 	#endif
 	#if defined(FORCE_FRSKYV_TUNING) && defined(FRSKYV_CC2500_INO)
 		if(protocol==MODE_FRSKYV)
-			option=FORCE_FRSKYV_TUNING;   // Use config-defined tuning value for FrSkyV
+			option=FORCE_FRSKYV_TUNING;	// Use config-defined tuning value for FrSkyV
 		else
 	#endif
 	#if defined(FORCE_FRSKYX_TUNING) && defined(FRSKYX_CC2500_INO)
 		if(protocol==MODE_FRSKYX)
-			option=FORCE_FRSKYX_TUNING;   // Use config-defined tuning value for FrSkyX
+			option=FORCE_FRSKYX_TUNING;	// Use config-defined tuning value for FrSkyX
 		else
 	#endif 
 	#if defined(FORCE_SFHSS_TUNING) && defined(SFHSS_CC2500_INO)
 		if (protocol==MODE_SFHSS)
-			option=FORCE_SFHSS_TUNING;    // Use config-defined tuning value for SFHSS
+			option=FORCE_SFHSS_TUNING;	// Use config-defined tuning value for SFHSS
 		else
 	#endif
-			option=rx_ok_buff[3];   // Use radio-defined option value
+	#if defined(FORCE_CORONA_TUNING) && defined(CORONA_CC2500_INO)
+		if (protocol==MODE_CORONA)
+			option=FORCE_CORONA_TUNING;	// Use config-defined tuning value for CORONA
+		else
+	#endif
+			option=rx_ok_buff[3];		// Use radio-defined option value
 	
 	#ifdef FAILSAFE_ENABLE
 		bool failsafe=false;
 		if(rx_ok_buff[0]&0x02)
-		{ //packet contains failsafe instead of channels
+		{ // Packet contains failsafe instead of channels
 			failsafe=true;
 			rx_ok_buff[0]&=0xFD;				//remove the failsafe flag
 			FAILSAFE_VALUES_on;					//failsafe data has been received
@@ -1129,6 +1151,10 @@ void update_serial_data()
 	{ // New model has been selected
 		CHANGE_PROTOCOL_FLAG_on;				//change protocol
 		WAIT_BIND_off;
+		if(IS_AUTOBIND_FLAG_on)
+			BIND_IN_PROGRESS;					//launch bind right away if in autobind mode
+		else
+			BIND_DONE;
 		protocol=(rx_ok_buff[0]==0x55?0:32) + (rx_ok_buff[1]&0x1F);	//protocol no (0-63) bits 4-6 of buff[1] and bit 0 of buf[0]
 		sub_protocol=(rx_ok_buff[2]>>4)& 0x07;	//subprotocol no (0-7) bits 4-6
 		RX_num=rx_ok_buff[2]& 0x0F;				// rx_num bits 0---3
@@ -1136,10 +1162,13 @@ void update_serial_data()
 	}
 	else
 		if( ((rx_ok_buff[1]&0x80)!=0) && ((cur_protocol[1]&0x80)==0) )		// Bind flag has been set
-			CHANGE_PROTOCOL_FLAG_on;			//restart protocol with bind
+		{ // Restart protocol with bind
+			CHANGE_PROTOCOL_FLAG_on;
+			BIND_IN_PROGRESS;
+		}
 		else
 			if( ((rx_ok_buff[1]&0x80)==0) && ((cur_protocol[1]&0x80)!=0) )	// Bind flag has been reset
-			{
+			{ // Request protocol to end bind
 				#if defined(FRSKYD_CC2500_INO) || defined(FRSKYX_CC2500_INO) || defined(FRSKYV_CC2500_INO)
 				if(protocol==MODE_FRSKYD || protocol==MODE_FRSKYX || protocol==MODE_FRSKYV)
 					BIND_DONE;
diff --git a/Multiprotocol/NRF24l01_SPI.ino b/Multiprotocol/NRF24l01_SPI.ino
index bbe2ed0..c66f14b 100644
--- a/Multiprotocol/NRF24l01_SPI.ino
+++ b/Multiprotocol/NRF24l01_SPI.ino
@@ -161,7 +161,7 @@ void NRF24L01_SetBitrate(uint8_t bitrate)
 void NRF24L01_SetPower()
 {
 	uint8_t power=NRF_BIND_POWER;
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		#ifdef NRF24L01_ENABLE_LOW_POWER
 			power=IS_POWER_FLAG_on?NRF_HIGH_POWER:NRF_LOW_POWER;
 		#else
diff --git a/Multiprotocol/Q303_nrf24l01.ino b/Multiprotocol/Q303_nrf24l01.ino
index 9026931..2d22eb1 100644
--- a/Multiprotocol/Q303_nrf24l01.ino
+++ b/Multiprotocol/Q303_nrf24l01.ino
@@ -354,7 +354,7 @@ static void __attribute__((unused)) Q303_initialize_txid()
 
 uint16_t Q303_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		Q303_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/SHENQI_nrf24l01.ino b/Multiprotocol/SHENQI_nrf24l01.ino
index 2ffc2fc..4f34f4b 100644
--- a/Multiprotocol/SHENQI_nrf24l01.ino
+++ b/Multiprotocol/SHENQI_nrf24l01.ino
@@ -90,7 +90,7 @@ void SHENQI_send_packet()
 
 uint16_t SHENQI_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		SHENQI_send_packet();
 	else
 	{
diff --git a/Multiprotocol/SPI.ino b/Multiprotocol/SPI.ino
index 093674e..b097127 100644
--- a/Multiprotocol/SPI.ino
+++ b/Multiprotocol/SPI.ino
@@ -17,6 +17,10 @@
 /********************/
 #ifdef STM32_BOARD
 
+#ifdef DEBUG_SERIAL
+//	#define DEBUG_SPI
+#endif
+
 SPIClass SPI_2(2); 								//Create an instance of the SPI Class called SPI_2 that uses the 2nd SPI Port
 
 void initSPI2()
@@ -35,6 +39,9 @@ void initSPI2()
 void SPI_Write(uint8_t command)
 {//working OK	
 	SPI2_BASE->DR = command;					//Write the first data item to be transmitted into the SPI_DR register (this clears the TXE flag).
+	#ifdef DEBUG_SPI
+		debug("%02X ",command);
+	#endif
 	while (!(SPI2_BASE->SR & SPI_SR_RXNE));
 	command = SPI2_BASE->DR;					// ... and read the last received data.
 }
diff --git a/Multiprotocol/Telemetry.ino b/Multiprotocol/Telemetry.ino
index 77f5a36..58bae07 100644
--- a/Multiprotocol/Telemetry.ino
+++ b/Multiprotocol/Telemetry.ino
@@ -107,7 +107,7 @@ static void multi_send_status()
 		if (IS_WAIT_BIND_on)
 			flags |= 0x10;
 		else
-			if (!IS_BIND_DONE_on)
+			if (IS_BIND_IN_PROGRESS)
 				flags |= 0x08;
 		#ifdef FAILSAFE_ENABLE
 			//Is failsafe supported?
@@ -1052,7 +1052,6 @@ void TelemetryUpdate()
 			#endif
 			if(USART3_BASE->SR & USART_SR_TXE)
 			{
-				USART3_BASE->SR &= ~USART_SR_TXE;	
 		#endif
 				if(tx_head!=tx_tail)
 				{
diff --git a/Multiprotocol/V2X2_nrf24l01.ino b/Multiprotocol/V2X2_nrf24l01.ino
index 23cf69b..d9a84a8 100644
--- a/Multiprotocol/V2X2_nrf24l01.ino
+++ b/Multiprotocol/V2X2_nrf24l01.ino
@@ -275,7 +275,7 @@ uint16_t initV2x2()
 {	
 	v202_init();
 	//
-	if (IS_AUTOBIND_FLAG_on)
+	if (IS_BIND_IN_PROGRESS)
 	{
 		bind_counter = V2X2_BIND_COUNT;
 		phase = V202_INIT2;
diff --git a/Multiprotocol/Validate.h b/Multiprotocol/Validate.h
index f350587..bf1e8c3 100644
--- a/Multiprotocol/Validate.h
+++ b/Multiprotocol/Validate.h
@@ -81,6 +81,11 @@
 		#error "The SFHSS forced frequency tuning value is outside of the range -127..127."
 	#endif
 #endif
+#ifdef FORCE_CORONA_TUNING
+	#if ( FORCE_CORONA_TUNING < -127 ) || ( FORCE_CORONA_TUNING > 127 )
+		#error "The CORONA forced frequency tuning value is outside of the range -127..127."
+	#endif
+#endif
 
 //Change/Force configuration if OrangeTX
 #ifdef ORANGE_TX
@@ -113,6 +118,7 @@
 	#undef	FRSKYV_CC2500_INO
 	#undef	FRSKYX_CC2500_INO
 	#undef	SFHSS_CC2500_INO
+	#undef	CORONA_CC2500_INO
 #endif
 #ifndef NRF24L01_INSTALLED
 	#undef	BAYANG_NRF24L01_INO
diff --git a/Multiprotocol/WK2x01_cyrf6936.ino b/Multiprotocol/WK2x01_cyrf6936.ino
index 6d4b46e..58aadb8 100644
--- a/Multiprotocol/WK2x01_cyrf6936.ino
+++ b/Multiprotocol/WK2x01_cyrf6936.ino
@@ -288,7 +288,7 @@ static void __attribute__((unused)) WK_build_beacon_pkt_2801()
 	uint8_t bind_state;
 
 	#ifdef ENABLE_PPM
-	if(mode_select && option==0 && IS_BIND_DONE_on) 			//PPM mode and option not already set and bind is finished
+	if(mode_select && option==0 && IS_BIND_DONE) 			//PPM mode and option not already set and bind is finished
 	{
 		BIND_SET_INPUT;
 		BIND_SET_PULLUP;										// set pullup
@@ -300,7 +300,7 @@ static void __attribute__((unused)) WK_build_beacon_pkt_2801()
 		BIND_SET_OUTPUT;
 	}
 	#endif //ENABLE_PPM
-    if(prev_option!=option && IS_BIND_DONE_on)
+    if(prev_option!=option && IS_BIND_DONE)
 	{
 		set_rx_tx_addr(MProtocol_id);
 		rx_tx_addr[2]=rx_tx_addr[3]<<4;		// Make use of RX_Num
diff --git a/Multiprotocol/YD717_nrf24l01.ino b/Multiprotocol/YD717_nrf24l01.ino
index ba51eec..3af6e44 100644
--- a/Multiprotocol/YD717_nrf24l01.ino
+++ b/Multiprotocol/YD717_nrf24l01.ino
@@ -154,7 +154,7 @@ static void __attribute__((unused)) yd717_init()
 
 uint16_t yd717_callback()
 {
-	if(IS_BIND_DONE_on)
+	if(IS_BIND_DONE)
 		yd717_send_packet(0);
 	else
 	{
diff --git a/Multiprotocol/_Config.h b/Multiprotocol/_Config.h
index 987b415..882ec7b 100644
--- a/Multiprotocol/_Config.h
+++ b/Multiprotocol/_Config.h
@@ -133,6 +133,7 @@
 #define	FRSKYD_CC2500_INO
 #define	FRSKYX_CC2500_INO
 #define	SFHSS_CC2500_INO
+#define	CORONA_CC2500_INO
 
 //The protocols below need a NRF24L01 to be installed
 #define	BAYANG_NRF24L01_INO
@@ -159,6 +160,7 @@
 #define	ESKY150_NRF24L01_INO
 #define	H8_3D_NRF24L01_INO
 
+
 /**************************/
 /*** FAILSAFE SETTINGS  ***/
 /**************************/
@@ -188,10 +190,11 @@
 //Once a good tuning value is found it can be set here and will override the radio's 'option' setting for all existing and new models which use that protocol.
 //For more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/tree/master/docs/Frequency_Tuning.md
 //Uncomment the lines below (remove the "//") and set an appropriate value (replace the "0") to enable.  Valid range is -127 to +127.
-//#define FORCE_FRSKYD_TUNING 0
-//#define FORCE_FRSKYV_TUNING 0
-//#define FORCE_FRSKYX_TUNING 0
-//#define FORCE_SFHSS_TUNING  0
+//#define FORCE_FRSKYD_TUNING	0
+//#define FORCE_FRSKYV_TUNING	0
+//#define FORCE_FRSKYX_TUNING	0
+//#define FORCE_SFHSS_TUNING	0
+//#define FORCE_CORONA_TUNING	0
 
 /**************************/
 /*** TELEMETRY SETTINGS ***/
@@ -437,6 +440,9 @@ const PPM_Parameters PPM_prot[15]=	{
 		H20H
 		H20 Mini
 		H30 Mini
+	MODE_CORONA
+		COR_V1
+		COR_V2
 */
 
 // RX_Num is used for model match. Using RX_Num	values different for each receiver will prevent starting a model with the false config loaded...