gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-12 17:57:53 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
Ben Lye 2019-09-06 19:46:22 +01:00 committed by GitHub
parent 5ee0b1c554
commit 70465e9560
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/Compiling_STM32.md
View File

@ -113,7 +113,7 @@ You can proceed to the next step.
### USB port
Ensure that you [installed the necessary drivers](https://github.com/benlye/DIY-Multiprotocol-TX-Module/blob/doc-updates/docs/Arduino_IDE_Boards.md#install-device-drivers).
If your Multiprotocol module has a USB port, connect it to the computer. With the drivers installed your computer should detect the module as a COM port. If the device appears correctly (check in **Device Manager**) you can proceed to the next step, Flashing the firmware. If not, you will need to flash your module one time using a USB-to-serial adapter (also known as an FTDI adapter).
If your Multiprotocol module has a USB port, connect it to the computer. With the drivers installed your computer should detect the module as a COM port. If the device appears correctly (check in **Device Manager**) you can proceed to the next step and [upload the firmware](#upload-the-firmware). If not, you will need to flash your module one time using a USB-to-serial adapter (also known as an FTDI adapter).
**Note:** Some modules require external power in order for the USB port to work. If your module does not power on with USB power alone, install it in the transmitter and switch the transmitter on. It is generally safe for the module to recieve power from both USB and the transmitter.