moved register definitions to a different file and created higher level functions for using them; added preliminary support for 868 MHz mode, not fully working yet

Multiprotocol/iface_sx1276.h

@@ -0,0 +1,90 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _IFACE_SX1276_H_
+#define _IFACE_SX1276_H_
+
+enum
+{
+    SX1276_00_FIFO                  = 0x00,        
+    SX1276_01_OPMODE                = 0x01,
+    SX1276_06_FRFMSB                = 0x06,
+    SX1276_09_PACONFIG              = 0x09,
+    SX1276_0B_OCP                   = 0x0B,
+    SX1276_0C_LNA                   = 0x0C,
+    SX1276_0D_FIFOADDRPTR           = 0x0D,
+    SX1276_0E_FIFOTXBASEADDR        = 0x0E,
+    SX1276_11_IRQFLAGSMASK          = 0x11,
+    SX1276_1D_MODEMCONFIG1          = 0x1D,
+    SX1276_1E_MODEMCONFIG2          = 0x1E,
+    SX1276_20_PREAMBLEMSB           = 0x20,
+    SX1276_22_PAYLOAD_LENGTH        = 0x22,
+    SX1276_24_HOPPERIOD             = 0x24,
+    SX1276_26_MODEMCONFIG3          = 0x26,
+    SX1276_31_DETECTOPTIMIZE        = 0x31,
+    SX1276_37_DETECTIONTHRESHOLD    = 0x37,
+    SX1276_40_DIOMAPPING1           = 0x40,
+    SX1276_42_VERSION               = 0x42,
+    SX1276_4D_PADAC                 = 0x4D
+};
+
+enum
+{
+    SX1276_OPMODE_SLEEP = 0,
+    SX1276_OPMODE_STDBY,
+    SX1276_OPMODE_FSTX,
+    SX1276_OPMODE_TX,
+    SX1276_OPMODE_FSRX,
+    SX1276_OPMODE_RXCONTINUOUS,
+    SX1276_OPMODE_RXSINGLE,
+    SX1276_OPMODE_CAD
+};
+
+enum
+{
+    SX1276_DETECT_OPTIMIZE_SF7_TO_SF12 = 0x03,
+    SX1276_DETECT_OPTIMIZE_SF6 = 0x05
+};
+
+enum
+{
+    SX1276_MODEM_CONFIG1_BW_7_8KHZ = 0,
+    SX1276_MODEM_CONFIG1_BW_10_4KHZ,
+    SX1276_MODEM_CONFIG1_BW_15_6KHZ,
+    SX1276_MODEM_CONFIG1_BW_20_8KHZ,
+    SX1276_MODEM_CONFIG1_BW_31_25KHZ,
+    SX1276_MODEM_CONFIG1_BW_41_7KHZ,
+    SX1276_MODEM_CONFIG1_BW_62_5KHZ,
+    SX1276_MODEM_CONFIG1_BW_125KHZ,
+    SX1276_MODEM_CONFIG1_BW_250KHZ,
+    SX1276_MODEM_CONFIG1_BW_500KHZ
+};
+
+enum
+{
+    SX1276_MODEM_CONFIG1_CODING_RATE_4_5 = 1,
+    SX1276_MODEM_CONFIG1_CODING_RATE_4_6,
+    SX1276_MODEM_CONFIG1_CODING_RATE_4_7,
+    SX1276_MODEM_CONFIG1_CODING_RATE_4_8
+};
+
+enum
+{
+    SX1276_MODEM_DETECTION_THRESHOLD_SF7_TO_SF12 = 0x0A,
+    SX1276_MODEM_DETECTION_THRESHOLD_SF6 = 0x0C,
+
+};
+
+#endif