diff --git a/docs/Module_Build_From_Scratch.md b/docs/Module_Build_From_Scratch.md
index 4d3774b..a447c9f 100644
--- a/docs/Module_Build_From_Scratch.md
+++ b/docs/Module_Build_From_Scratch.md
@@ -11,12 +11,9 @@ A module case that fits your receiver like the one [here](https://www.xtremepowe
  <img src="https://www.xtremepowersystems.net/prodimages/j1case.jpg" width="200" height="180" />  
   or you can 3D print your own from a selection on Thingiverse ([Example 1](http://www.thingiverse.com/thing:1852868) [Example 2](http://www.thingiverse.com/thing:1661833)).  
  [<img src="http://thingiverse-production-new.s3.amazonaws.com/renders/55/1c/cb/0a/e4/5d2c2b06be7f3f6f8f0ab4638dd7c6fc_preview_featured.jpg" width="250" height="200" /> ](http://www.thingiverse.com/thing:1852868)  
-  For 9XR/9XR Pro, a new 3D printed module is available which makes use of the built in antenna in the handle. This means nothing is getting out of the radio back! You can find all details of this module case on [Thingiverse](http://www.thingiverse.com/thing:2050717).  
+  For 9XR/9XR Pro, a new 3D printed module is available which makes use of the built in antenna in the handle. This means nothing is getting out of the radio back. You can find all details of this module case on [Thingiverse](http://www.thingiverse.com/thing:2050717).  
   <img src="images/9XR_module.jpg" width="113" height="200" /> <img src="images/9XR_module_connector.jpg" width="274" height="200" /> 
 
-
-You will require a second Arduino or a FTDI (USB to TTL serial) cable to program the Pro-Mini. Like the one [here](https://www.sparkfun.com/products/9717).  **Make sure you get only a 3.3V FTDI cable - or you will fry your 3.3V RF modules when you connect it up.**
-
 ##Reference Schematic <a name="Schematic"></a>
 Here is the schematic you can use to troubleshoot the module
 <img src="images/DIY_Mulitprotocol_Module_Schematic.jpeg" width="1000" height="500" />