diff --git a/Multiprotocol/DSM_cyrf6936.ino b/Multiprotocol/DSM_cyrf6936.ino
index dfe0cc6..ee8b654 100644
--- a/Multiprotocol/DSM_cyrf6936.ino
+++ b/Multiprotocol/DSM_cyrf6936.ino
@@ -262,7 +262,9 @@ static void __attribute__((unused)) DSM_build_data_packet(uint8_t upper)
 		if(sub_protocol==DSM2_22)
 			bits=10;						// Only DSM_22 is using a resolution of 1024
 	}
-
+	#ifdef DSM_THROTTLE_KILL_CH
+		uint32_t kill_ch=Channel_data[DSM_THROTTLE_KILL_CH];
+	#endif
 	for (uint8_t i = 0; i < 7; i++)
 	{	
 		uint8_t idx = ch_map[(upper?7:0) + i];//1,5,2,3,0,4	   
@@ -271,11 +273,22 @@ static void __attribute__((unused)) DSM_build_data_packet(uint8_t upper)
 		{
 			/* Spektrum own remotes transmit normal values during bind and actually use this (e.g. Nano CP X) to
 			   select the transmitter mode (e.g. computer vs non-computer radio), so always send normal output */
-			#ifdef DSM_MAX_THROW
-				value=Channel_data[CH_TAER[idx]];								// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
-			#else
-				value=convert_channel_16b_nolimit(CH_TAER[idx],0x150,0x6B0);	// -100%..+100% => 1100..1900us and -125%..+125% => 1000..2000us based on Redcon 6 channel DSM2 RX
+			#ifdef DSM_THROTTLE_KILL_CH
+				if(CH_TAER[idx]==THROTTLE && kill_ch<=604)
+				{//Activate throttle kill only if DSM_THROTTLE_KILL_CH below -50%
+					if(kill_ch<CHANNEL_MIN_100)					// restrict val to 0...400
+						kill_ch=0;
+					else
+						kill_ch-=CHANNEL_MIN_100;
+					value=(uint16_t)((kill_ch*0x150)/400);		// kill channel -100%->904us ... -50%->1100us
+				}
+				else
 			#endif
+				#ifdef DSM_MAX_THROW
+					value=Channel_data[CH_TAER[idx]];								// -100%..+100% => 1024..1976us and -125%..+125% => 904..2096us based on Redcon 6 channel DSM2 RX
+				#else
+					value=convert_channel_16b_nolimit(CH_TAER[idx],0x150,0x6B0);	// -100%..+100% => 1100..1900us and -125%..+125% => 1000..2000us based on Redcon 6 channel DSM2 RX
+				#endif
 			if(bits==10) value>>=1;
 			value |= (upper && i==0 ? 0x8000 : 0) | (idx << bits);
 		}	  
diff --git a/Multiprotocol/Multiprotocol.h b/Multiprotocol/Multiprotocol.h
index cf538ce..91c1f0b 100644
--- a/Multiprotocol/Multiprotocol.h
+++ b/Multiprotocol/Multiprotocol.h
@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		2
 #define VERSION_REVISION	1
-#define VERSION_PATCH_LEVEL	16
+#define VERSION_PATCH_LEVEL	17
 
 //******************
 // Protocols
diff --git a/Multiprotocol/Validate.h b/Multiprotocol/Validate.h
index b5d3f22..55e026a 100644
--- a/Multiprotocol/Validate.h
+++ b/Multiprotocol/Validate.h
@@ -273,6 +273,15 @@
 	#endif
 #endif
 
+#if defined(DSM_THROTTLE_KILL_CH)
+	#if DSM_THROTTLE_KILL_CH<4
+		#error DSM_THROTTLE_KILL_CH must be above 4.
+	#endif
+	#if DSM_THROTTLE_KILL_CH>16
+		#error DSM_THROTTLE_KILL_CH must be below or equal to 16.
+	#endif
+#endif
+
 #if MIN_PPM_CHANNELS>16
 	#error MIN_PPM_CHANNELS must be below or equal to 16. The default for this value is 4.
 #endif
diff --git a/Multiprotocol/_Config.h b/Multiprotocol/_Config.h
index ca8f0ff..ba90828 100644
--- a/Multiprotocol/_Config.h
+++ b/Multiprotocol/_Config.h
@@ -49,10 +49,6 @@
 //#define REVERSE_THROTTLE
 //#define REVERSE_RUDDER
 
-//DSM protocol is using by default the Spektrum throw of 1100..1900us @100% and 1000..2000us @125%.
-//For more throw, 1024..1976us @100% and 904..2096us @125%, remove the "//" on the line below. Be aware that too much throw can damage some UMX servos. To achieve standard throw in this mode use a channel weight of 84%.
-//#define DSM_MAX_THROW
-
 
 /*****************/
 /*** AUTO BIND ***/  // Also referred as "Bind on powerup"
@@ -200,6 +196,25 @@
 #define	V911S_NRF24L01_INO
 #define	YD717_NRF24L01_INO
 
+
+/***************************/
+/*** PROTOCOLS SETTINGS  ***/
+/***************************/
+
+//DSM specific settings
+//---------------------
+//The DSM protocol is using by default the Spektrum throw of 1100..1900us @100% and 1000..2000us @125%.
+// For more throw, 1024..1976us @100% and 904..2096us @125%, remove the "//" on the line below. Be aware that too much throw can damage some UMX servos. To achieve standard throw in this mode use a channel weight of 84%.
+//#define DSM_MAX_THROW
+//Some models (X-Vert, Balde 230S...) require a special value to instant stop the motor(s).
+// You can disable this feature by adding "//" on the line below. You have to specify which channel (15 by default) will be used to kill the throttle channel.
+// If the channel is between -50% and -100%, the throttle output will be forced between -100% and -150%. If the channel is above -50%, the throttle is untouched.
+#define DSM_THROTTLE_KILL_CH 15 
+
+//AFHDS2A specific settings
+//-------------------------
+//TODO: make LQI available on RX channel
+
 /**************************/
 /*** FAILSAFE SETTINGS  ***/
 /**************************/