gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-12 19:53:16 +00:00
Code Issues Projects Releases Wiki Activity

XN297EMU: option=0->nrf24L01, option!=0 -> CC2500

Browse Source 
XN297L@250kbps is emulated by default with the NRF24L01. If option (freq tune) is diffrent from 0, the CC2500 module (if installed) will be used instead with option being the freq usual tuning.
This commit is contained in:
pascallanger
2020-01-12 14:06:27 +01:00
parent 953a97dae4
commit 6a9b6ed4be
12 changed files with 408 additions and 426 deletions
Download Patch File Download Diff File Expand all files Collapse all files

59
Multiprotocol/_Config.h
View File

@@ -78,9 +78,6 @@
#define CC2500_INSTALLED
#define NRF24L01_INSTALLED
//If available use the CC2500 to emulate the XN297L @250Kbps instead of the NRF24L01. Comment to disable.
#define XN297L_CC2500_EMU
/** OrangeRX TX **/
//If you compile for the OrangeRX TX module you need to select the correct board type.
//By default the compilation is done for the GREEN board, to switch to a BLUE board uncomment the line below by removing the "//"
@@ -488,33 +485,6 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
// - 0x40010000 will give to the protocol the channels in the order 4,2,3,1,5,6,7,8 swapping channel 1 and 4. Note: 0 means leave the channel where it is.
// - 0x0000ABCD will give to the protocol the channels in the order 1,2,3,4,10,11,12,13 which potentially enables acces to channels not available on your TX. Note A=10,B=11,C=12,D=13,E=14,F=15.
/**********************************/
/*** DIRECT INPUTS SETTINGS ***/
/**********************************/
//In this section you can configure the direct inputs.
//It enables switches wired directly to the board
//Direct inputs works only in ppm mode and only for stm_32 boards
//Uncomment following lines to enable derect inputs or define your own configuration in _MyConfig.h
/*
#define ENABLE_DIRECT_INPUTS
#define DI1_PIN PC13
#define IS_DI1_on (digitalRead(DI1_PIN)==LOW)
#define DI2_PIN PC14
#define IS_DI2_on (digitalRead(DI2_PIN)==LOW)
#define DI3_PIN PC15
#define IS_DI3_on (digitalRead(DI3_PIN)==LOW)
//Define up to 4 direct input channels
//CHANNEL1 - 2pos switch
#define DI_CH1_read IS_DI1_on ? PPM_MAX_100*2 : PPM_MIN_100*2
//CHANNEL2 - 3pos switch
#define DI_CH2_read IS_DI2_on ? PPM_MAX_100*2 : (IS_DI2_on ? PPM_MAX_100 + PPM_MIN_100 : PPM_MIN_100*2)
*/
/* Available protocols and associated sub protocols to pick and choose from (Listed in alphabetical order)
PROTO_AFHDS2A
PWM_IBUS
@@ -695,7 +665,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
PROTO_V761
NONE
PROTO_V911S
NONE
V911S_STD
V911S_E119
PROTO_WFLY
NONE
PROTO_WK2x01
@@ -714,3 +685,29 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
PROTO_ZSX
NONE
*/
/**********************************/
/*** DIRECT INPUTS SETTINGS ***/
/**********************************/
//In this section you can configure the direct inputs.
//It enables switches wired directly to the board
//Direct inputs works only in ppm mode and only for stm_32 boards
//Uncomment following lines to enable derect inputs or define your own configuration in _MyConfig.h
/*
#define ENABLE_DIRECT_INPUTS
#define DI1_PIN PC13
#define IS_DI1_on (digitalRead(DI1_PIN)==LOW)
#define DI2_PIN PC14
#define IS_DI2_on (digitalRead(DI2_PIN)==LOW)
#define DI3_PIN PC15
#define IS_DI3_on (digitalRead(DI3_PIN)==LOW)
//Define up to 4 direct input channels
//CHANNEL1 - 2pos switch
#define DI_CH1_read IS_DI1_on ? PPM_MAX_100*2 : PPM_MIN_100*2
//CHANNEL2 - 3pos switch
#define DI_CH2_read IS_DI2_on ? PPM_MAX_100*2 : (IS_DI2_on ? PPM_MAX_100 + PPM_MIN_100 : PPM_MIN_100*2)
*/