gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 10:17:53 +00:00
Code Issues Projects Releases Wiki Activity

Fixed typo.

Browse Source
This commit is contained in:
LapinFou 2017-04-18 18:28:18 +02:00
parent a7b914b84e
commit 6894228a63
2 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Advanced_Topics.md
View File

@ -36,17 +36,17 @@ The key difference of this method is that the 3.3V FTDI cable must also provide
1. Set the 3.3V jumper.
1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V).
Connect the pins as follows:
..* Module RX pin to FTDI TX pin
..* Module TX pin to FTDI Rx pin
..* Module GND to FTDI GND
..* Module 5V to FTDI 3.3V FTDI power supply
* Module RX pin to FTDI TX pin
* Module TX pin to FTDI Rx pin
* Module GND to FTDI GND
* Module 5V to FTDI 3.3V FTDI power supply
1. In arduino IDE under the **Tools** -> **Board:** check that you have selected the **Generic STM32F103C series** board
1. Under **Tools** -> **Upload Method:** select **Serial**.
1. Click "Upload" and the sketch will be uploaded normally.
1. Once the firmware has uploaded:
..* Remove the 3.3V jumper!!!!
..* Remove the BOOT0 jumper
..* Check that you removed the 3.3V jumper
* Remove the 3.3V jumper!!!!
* Remove the BOOT0 jumper
* Check that you removed the 3.3V jumper
1. Insert the module into the transmitter bay