gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 18:27:53 +00:00
Code Issues Projects Releases Wiki Activity

Fixed typo.

Browse Source
This commit is contained in:
LapinFou 2017-04-18 18:28:18 +02:00
parent a7b914b84e
commit 6894228a63
2 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Advanced_Topics.md
View File

@ -36,17 +36,17 @@ The key difference of this method is that the 3.3V FTDI cable must also provide
1. Set the 3.3V jumper. 1. Set the 3.3V jumper.
1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V). 1. Connect your 3.3V FTDI cable (USB - TTL serial) to Multiprotocol serial port (RX,TX,GND,5V).
Connect the pins as follows: Connect the pins as follows:
..* Module RX pin to FTDI TX pin * Module RX pin to FTDI TX pin
..* Module TX pin to FTDI Rx pin * Module TX pin to FTDI Rx pin
..* Module GND to FTDI GND * Module GND to FTDI GND
..* Module 5V to FTDI 3.3V FTDI power supply * Module 5V to FTDI 3.3V FTDI power supply
1. In arduino IDE under the **Tools** -> **Board:** check that you have selected the **Generic STM32F103C series** board 1. In arduino IDE under the **Tools** -> **Board:** check that you have selected the **Generic STM32F103C series** board
1. Under **Tools** -> **Upload Method:** select **Serial**. 1. Under **Tools** -> **Upload Method:** select **Serial**.
1. Click "Upload" and the sketch will be uploaded normally. 1. Click "Upload" and the sketch will be uploaded normally.
1. Once the firmware has uploaded: 1. Once the firmware has uploaded:
..* Remove the 3.3V jumper!!!! * Remove the 3.3V jumper!!!!
..* Remove the BOOT0 jumper * Remove the BOOT0 jumper
..* Check that you removed the 3.3V jumper * Check that you removed the 3.3V jumper
1. Insert the module into the transmitter bay 1. Insert the module into the transmitter bay