From 65a5c37ffb1f56094a96325090c70b19cc2c0667 Mon Sep 17 00:00:00 2001 From: pascallanger Date: Mon, 20 Nov 2017 18:26:46 +0100 Subject: [PATCH] Update Compiling_STM32.md --- docs/Compiling_STM32.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Compiling_STM32.md b/docs/Compiling_STM32.md index 82c5c02..58809af 100644 --- a/docs/Compiling_STM32.md +++ b/docs/Compiling_STM32.md @@ -77,7 +77,7 @@ See below my module for reference This method use USB connector on the STM32 V1.0 board or on the maple clone board. 1. Install first maple USB driver by running the batch file found in Arduino STM32 package folder ```..\hardware\Arduino_STM32\drivers\win\install_drivers.bat``` -1. Download the free STM32 flash loader demonstrator from [ST.com](http://www.st.com/en/development-tools/flasher-stm32.html) and using a USB-TTL device (like FTDI cable) flash the STM32duino bootloader available from Roger Clark's great STM32 site [here](https://github.com/rogerclarkmelbourne/STM32duino-bootloader/tree/master/STM32F1/binaries) .Use bootloader **generic_boot20_pa1.bin** +1. Download the free STM32 flash loader demonstrator from [ST.com](http://www.st.com/en/development-tools/flasher-stm32.html) and use a USB-TTL device (like FTDI cable) to flash the [StmMultiUSB.bin](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/raw/master/BootLoaders/StmMultiUSB/StmMultiUSB.bin) bootloader. 1. Open Arduino IDE,browse to multiprotocol folder,load the sketch multiprotocol.ino.Select the serial COM port(see notes below) 1. In Arduino IDE under "Upload method" select **STM32duino**-bootloader.Click upload ,wait until upload is complete.