gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-03 12:07:52 +00:00
Code Issues Projects Releases Wiki Activity

XMEGA

Browse Source
This commit is contained in:
midelic 2016-09-02 15:59:44 +01:00 committed by GitHub
parent 37b92e71db
commit 65179cf37f
1 changed files with 22 additions and 23 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

43
Multiprotocol/Multiprotocol.ino
View File

@ -40,6 +40,10 @@ HardwareTimer timer(2);
#include <avr/pgmspace.h> #include <avr/pgmspace.h>
#include "_Config.h" #include "_Config.h"
#include "TX_Def.h" #include "TX_Def.h"
#ifdef XMEGA
#undef ENABLE_PPM // Disable PPM for orange module
#endif
//Multiprotocol module configuration file //Multiprotocol module configuration file
//Global constants/variables //Global constants/variables
@ -169,6 +173,13 @@ void setup()
for ( uint8_t count = 0 ; count < 20 ; count += 1 ) for ( uint8_t count = 0 ; count < 20 ; count += 1 )
asm("nop") ; asm("nop") ;
PORTE.OUTCLR = 0x01 ; PORTE.OUTCLR = 0x01 ;
// TCC1 16-bit timer, clocked at 0.5uS
EVSYS.CH3MUX = 0x80 + 0x04 ; // Prescaler of 16
TCC1.CTRLB = 0; TCC1.CTRLC = 0; TCC1.CTRLD = 0; TCC1.CTRLE = 0;
TCC1.INTCTRLA = 0; TCC1.INTCTRLB = 0;
TCC1.PER = 0xFFFF ;
TCC1.CNT = 0 ;
TCC1.CTRLA = 0x0B ; // Event3 (prescale of 16)
#else #else
// General pinout // General pinout
#if defined STM32_board #if defined STM32_board
@ -199,6 +210,8 @@ void setup()
pinMode(S2_pin,INPUT_PULLUP); pinMode(S2_pin,INPUT_PULLUP);
pinMode(S3_pin,INPUT_PULLUP); pinMode(S3_pin,INPUT_PULLUP);
pinMode(S4_pin,INPUT_PULLUP); pinMode(S4_pin,INPUT_PULLUP);
//select the counter clock.
start_timer2();//0.5us
#else #else
DDRD = (1<<CS_pin)|(1<<SDI_pin)|(1<<SCLK_pin)|(1<<CS_pin)|(1<< CC25_CSN_pin); DDRD = (1<<CS_pin)|(1<<SDI_pin)|(1<<SCLK_pin)|(1<<CS_pin)|(1<< CC25_CSN_pin);
DDRC = (1<<CTRL1)|(1<<CTRL2); //output DDRC = (1<<CTRL1)|(1<<CTRL2); //output
@ -206,6 +219,11 @@ void setup()
DDRB = _BV(0)|_BV(1); DDRB = _BV(0)|_BV(1);
PORTB = _BV(2)|_BV(3)|_BV(4)|_BV(5);//pullup 10,11,12 and bind button PORTB = _BV(2)|_BV(3)|_BV(4)|_BV(5);//pullup 10,11,12 and bind button
PORTC = _BV(0);//A0 high pullup PORTC = _BV(0);//A0 high pullup
#ifdef DEBUG_TX
TX_SET_OUTPUT;
#endif
TCCR1A = 0;
TCCR1B = (1 << CS11); //prescaler8, set timer1 to increment every 0.5us(16Mhz) and start timer
#endif #endif
#endif #endif
@ -223,25 +241,6 @@ void setup()
// // SPI enable, master, prescale of 16 // // SPI enable, master, prescale of 16
// SPID.CTRL = SPI_ENABLE_bm | SPI_MASTER_bm | SPI_PRESCALER0_bm ; // SPID.CTRL = SPI_ENABLE_bm | SPI_MASTER_bm | SPI_PRESCALER0_bm ;
//#endif //#endif
// Timer1 config
#ifdef XMEGA
// TCC1 16-bit timer, clocked at 0.5uS
EVSYS.CH3MUX = 0x80 + 0x04 ; // Prescaler of 16
TCC1.CTRLB = 0; TCC1.CTRLC = 0; TCC1.CTRLD = 0; TCC1.CTRLE = 0;
TCC1.INTCTRLA = 0; TCC1.INTCTRLB = 0;
TCC1.PER = 0xFFFF ;
TCC1.CNT = 0 ;
TCC1.CTRLA = 0x0B ; // Event3 (prescale of 16)
#else
#if defined STM32_board//16 bits timer for 0.5 us
//select the counter clock.
start_timer2();//0.5us
#else
TCCR1A = 0;
TCCR1B = (1 << CS11); //prescaler8, set timer1 to increment every 0.5us(16Mhz) and start timer
#endif
#endif
// Set servos positions // Set servos positions
for(uint8_t i=0;i<NUM_CHN;i++) for(uint8_t i=0;i<NUM_CHN;i++)
Servo_data[i]=1500; Servo_data[i]=1500;
@ -260,7 +259,7 @@ void setup()
// Read status of mode select binary switch // Read status of mode select binary switch
// after this mode_select will be one of {0000, 0001, ..., 1111} // after this mode_select will be one of {0000, 0001, ..., 1111}
#ifdef XMEGA #ifndef ENABLE_PPM
mode_select = MODE_SERIAL ; mode_select = MODE_SERIAL ;
#else #else
#if defined STM32_board #if defined STM32_board
@ -304,13 +303,13 @@ void setup()
protocol_init(); protocol_init();
#ifndef XMEGA
#ifndef STM32_board #ifndef STM32_board
//Configure PPM interrupt //Configure PPM interrupt
EICRA |=(1<<ISC11); // The rising edge of INT1 pin D3 generates an interrupt request EICRA |=(1<<ISC11); // The rising edge of INT1 pin D3 generates an interrupt request
EIMSK |= (1<<INT1); // INT1 interrupt enable EIMSK |= (1<<INT1); // INT1 interrupt enable
#endif #endif
#endif
#ifdef STM32_board #ifdef STM32_board
attachInterrupt(PPM_pin,PPM_decode,FALLING); attachInterrupt(PPM_pin,PPM_decode,FALLING);
#endif #endif