mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 14:48:14 +00:00
Add the IKEA Ansluta remote-controllable lighting protocol (#566)
* Add the IKEA Ansluta remote-controllable lighting protocol * Fixes to IKEA Ansluta implementation
This commit is contained in:
Konstantin Tretyakov
GitHub
parent
1648a0780a
commit
62c509b03c
122
Multiprotocol/IKEA_Ansluta_cc2500.ino
Normal file
122
Multiprotocol/IKEA_Ansluta_cc2500.ino
Normal file
@ -0,0 +1,122 @@
|
||||
/*
|
||||
This project is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
Multiprotocol is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with Multiprotocol. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
// This module makes it possible to bind to and control the IKEA "Ansluta" line
|
||||
// of remote-controlled lights.
|
||||
// To bind, first switch the receiver into binding mode, then the TX.
|
||||
// Once bound, the TX can send one of three commands:
|
||||
// lights off, lights dimmed 50% and lights on.
|
||||
// Those are mapped to throttle ranges 0..0x55, 0x56..0xAA, 0xAB..0xFF.
|
||||
#if defined(IKEAANSLUTA_CC2500_INO)
|
||||
|
||||
#include "iface_cc2500.h"
|
||||
|
||||
#define IKEAANSLUTA_BIND_COUNT 30 // ~ 2sec autobind/65ms per loop = 30 binding packets
|
||||
|
||||
// Commands
|
||||
#define IKEAANSLUTA_LIGHT_OFF 0x01
|
||||
#define IKEAANSLUTA_LIGHT_DIM 0x02 // 50% dimmed light
|
||||
#define IKEAANSLUTA_LIGHT_ON 0x03
|
||||
#define IKEAANSLUTA_PAIR 0xFF
|
||||
|
||||
void IKEAANSLUTA_send_command(uint8_t command){
|
||||
CC2500_Strobe(CC2500_SIDLE);
|
||||
packet[4] = option;
|
||||
packet[5] = command;
|
||||
CC2500_WriteData(packet, 8);
|
||||
}
|
||||
|
||||
uint16_t IKEAANSLUTA_callback(void)
|
||||
{
|
||||
if (bind_counter) {
|
||||
IKEAANSLUTA_send_command(IKEAANSLUTA_PAIR);
|
||||
if(--bind_counter == 0) {
|
||||
BIND_DONE;
|
||||
CC2500_SetPower();
|
||||
}
|
||||
}
|
||||
else {
|
||||
uint8_t throttle = convert_channel_8b(THROTTLE);
|
||||
uint8_t cmd = throttle <= 0x55 ? IKEAANSLUTA_LIGHT_OFF :
|
||||
throttle <= 0xAA ? IKEAANSLUTA_LIGHT_DIM :
|
||||
IKEAANSLUTA_LIGHT_ON;
|
||||
IKEAANSLUTA_send_command(cmd);
|
||||
}
|
||||
return 65535; // 65ms loop cycle is more than enough here (we could make it even longer if not for uint16_t)
|
||||
}
|
||||
|
||||
// Register initialization values as a continuous memory block (to save on flash memory)
|
||||
const PROGMEM uint8_t IKEAANSLUTA_init_values[] = {
|
||||
0xFF, // CC2500_06_PKTLEN
|
||||
0x04, // CC2500_07_PKTCTRL1
|
||||
0x05, // CC2500_08_PKTCTRL0
|
||||
0x00, // CC2500_09_ADDR (unused, default)
|
||||
0x10, // CC2500_0A_CHANNR
|
||||
0x09, // CC2500_0B_FSCTRL1
|
||||
0x00, // CC2500_0C_FSCTRL0
|
||||
0x5D, // CC2500_0D_FREQ2
|
||||
0x93, // CC2500_0E_FREQ1
|
||||
0xB1, // CC2500_0F_FREQ0
|
||||
0x2D, // CC2500_10_MDMCFG4
|
||||
0x3B, // CC2500_11_MDMCFG3
|
||||
0x73, // CC2500_12_MDMCFG2
|
||||
0xA2, // CC2500_13_MDMCFG1
|
||||
0xF8, // CC2500_14_MDMCFG0
|
||||
0x01, // CC2500_15_DEVIATN
|
||||
0x07, // CC2500_16_MCSM2
|
||||
0x30, // CC2500_17_MCSM1
|
||||
0x18, // CC2500_18_MCSM0
|
||||
0x1D, // CC2500_19_FOCCFG
|
||||
0x1C, // CC2500_1A_BSCFG
|
||||
0xC7, // CC2500_1B_AGCCTRL2
|
||||
0x00, // CC2500_1C_AGCCTRL1
|
||||
0xB2, // CC2500_1D_AGCCTRL0
|
||||
0x87, // CC2500_1E_WOREVT1 (unused, default)
|
||||
0x6b, // CC2500_1F_WOREVT0 (unused, default)
|
||||
0xf8, // CC2500_20_WORCTRL (unused, default)
|
||||
0xB6, // CC2500_21_FREND1
|
||||
0x10, // CC2500_22_FREND0
|
||||
0xEA, // CC2500_23_FSCAL3
|
||||
0x0A, // CC2500_24_FSCAL2
|
||||
0x00, // CC2500_25_FSCAL1
|
||||
0x11, // CC2500_26_FSCAL0
|
||||
0x41, // CC2500_27_RCCTRL1
|
||||
0x00, // CC2500_28_RCCTRL0
|
||||
};
|
||||
|
||||
void IKEAANSLUTA_init(void)
|
||||
{
|
||||
if (IS_BIND_DONE) bind_counter = 0;
|
||||
else bind_counter = IKEAANSLUTA_BIND_COUNT;
|
||||
|
||||
// All packets we send are the same
|
||||
packet[0] = 0x06;
|
||||
packet[1] = 0x55;
|
||||
packet[2] = 0x01;
|
||||
// Bytes 3&4 are the transmitter address (to which the RX binds)
|
||||
// Byte 5 is the command.
|
||||
packet[3] = rx_tx_addr[3]; // <pseudorandom tx-fixed value> + <rx_num>
|
||||
// packet[4] = option;
|
||||
// packet[5] = 0x00; // Command goes here
|
||||
packet[6] = 0xAA;
|
||||
packet[7] = 0xFF;
|
||||
|
||||
// Configure & initialize CC2500
|
||||
for (uint8_t i = 0; i <= CC2500_28_RCCTRL0-CC2500_06_PKTLEN; ++i)
|
||||
CC2500_WriteReg(CC2500_06_PKTLEN+i, pgm_read_byte_near(&IKEAANSLUTA_init_values[i]));
|
||||
CC2500_SetTxRxMode(TX_EN);
|
||||
CC2500_SetPower();
|
||||
}
|
||||
|
||||
#endif
|
||||
@ -98,6 +98,7 @@ const char STR_E010R5[] ="E010r5";
|
||||
const char STR_LOLI[] ="LOLI";
|
||||
const char STR_E129[] ="E129";
|
||||
const char STR_E016H[] ="E016H";
|
||||
const char STR_IKEAANSLUTA[]="Ansluta";
|
||||
const char STR_CONFIG[] ="Config";
|
||||
|
||||
const char STR_SUBTYPE_FLYSKY[] = "\x04""Std\0""V9x9""V6x6""V912""CX20";
|
||||
@ -330,6 +331,9 @@ const mm_protocol_definition multi_protocols[] = {
|
||||
#if defined(HUBSAN_A7105_INO)
|
||||
{PROTO_HUBSAN, STR_HUBSAN, STR_SUBTYPE_HUBSAN, 3, OPTION_VIDFREQ, 0, 0, SW_A7105, HUBSAN_init, HUBSAN_callback },
|
||||
#endif
|
||||
#if defined(IKEAANSLUTA_CC2500_INO)
|
||||
{PROTO_IKEAANSLUTA,STR_IKEAANSLUTA,NO_SUBTYPE, 0, OPTION_OPTION, 0, 0, SW_CC2500, IKEAANSLUTA_init,IKEAANSLUTA_callback },
|
||||
#endif
|
||||
#if defined(J6PRO_CYRF6936_INO)
|
||||
{PROTO_J6PRO, STR_J6PRO, NO_SUBTYPE, 0, OPTION_NONE, 0, 1, SW_CYRF, J6PRO_init, J6PRO_callback },
|
||||
#endif
|
||||
|
||||
@ -19,7 +19,7 @@
|
||||
#define VERSION_MAJOR 1
|
||||
#define VERSION_MINOR 3
|
||||
#define VERSION_REVISION 2
|
||||
#define VERSION_PATCH_LEVEL 78
|
||||
#define VERSION_PATCH_LEVEL 79
|
||||
|
||||
#define MODE_SERIAL 0
|
||||
|
||||
@ -113,7 +113,8 @@ enum PROTOCOLS
|
||||
PROTO_E129 = 83, // =>CYRF6936
|
||||
PROTO_JOYSWAY = 84, // =>A7105
|
||||
PROTO_E016H = 85, // =>NRF24L01
|
||||
PROTO_CONFIG = 86, // Module config
|
||||
PROTO_IKEAANSLUTA = 86, // =>CC2500
|
||||
PROTO_CONFIG = 87, // Module config
|
||||
|
||||
PROTO_NANORF = 126, // =>NRF24L01
|
||||
PROTO_TEST = 127, // =>CC2500
|
||||
|
||||
@ -203,6 +203,7 @@
|
||||
#define FRSKY_RX_CC2500_INO
|
||||
#define HITEC_CC2500_INO
|
||||
#define HOTT_CC2500_INO
|
||||
//#define IKEAANSLUTA_CC2500_INO // This is mostly a "for-fun" kind of a thing, not needed for most users
|
||||
#define SCANNER_CC2500_INO
|
||||
#define FUTABA_CC2500_INO
|
||||
#define SKYARTEC_CC2500_INO
|
||||
@ -693,6 +694,7 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]= {
|
||||
H107
|
||||
H301
|
||||
H501
|
||||
PROTO_IKEAANSLUTA
|
||||
PROTO_J6PRO
|
||||
NONE
|
||||
PROTO_JJRC345
|
||||
|
||||
Loading…
x
Reference in New Issue
Block a user