gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 20:58:10 +00:00
Code Issues Projects Releases Wiki Activity

Couple of edits...

Browse Source
This commit is contained in:
pascallanger 2016-01-24 17:15:02 +01:00
parent 644c10e994
commit 5d26357025
5 changed files with 9 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
Multiprotocol/CG023_nrf24l01.ino
View File

@ -255,10 +255,10 @@ static void CG023_initialize_txid()
rx_tx_addr[2] = rx_tx_addr[2] % 0x20;
rx_tx_addr[3] = rx_tx_addr[3] % 0x11;
hopping_frequency[0] = 0x06 + (rx_tx_addr[0]&0x0f);
hopping_frequency[1] = 0x15 + (rx_tx_addr[1]&0x0f);
hopping_frequency[2] = 0x24 + (rx_tx_addr[2]&0x0f);
hopping_frequency[3] = 0x33 + (rx_tx_addr[3]&0x0f);
hopping_frequency[0] = 0x06 + ((rx_tx_addr[0]&0x0f) % 0x0f);
hopping_frequency[1] = 0x15 + ((rx_tx_addr[1]&0x0f) % 0x0f);
hopping_frequency[2] = 0x24 + ((rx_tx_addr[2]&0x0f) % 0x0f);
hopping_frequency[3] = 0x33 + ((rx_tx_addr[3]&0x0f) % 0x0f);
}
else
{ // CG023 and YD829

2
Multiprotocol/CX10_nrf24l01.ino
View File

@ -199,7 +199,7 @@ uint16_t CX10_callback() {
NRF24L01_SetTxRxMode(TXRX_OFF);
NRF24L01_SetTxRxMode(TX_EN);
CX10_Write_Packet(1);
delay(1); // used to be 300µs in deviation but not working so 1ms now
delayMicroseconds(400); // 300µs in deviation but not working so using 400µs instead
// switch to RX mode
NRF24L01_SetTxRxMode(TXRX_OFF);
NRF24L01_FlushRx();

5
Multiprotocol/Multiprotocol.ino
View File

@ -469,7 +469,7 @@ static void update_serial_data()
static void module_reset()
{
if(remote_callback)
{ // a protocol was loaded, reset the module used
{ // previous protocol loaded
remote_callback = 0;
switch(prev_protocol)
{
@ -486,8 +486,7 @@ static void module_reset()
case MODE_DEVO:
CYRF_Reset();
break;
default:
// MODE_HISKY, MODE_V2X2, MODE_YD717, MODE_KN, MODE_SYMAX, MODE_SLT, MODE_CX10, MODE_CG023, MODE_BAYANG, MODE_ESKY
default: // MODE_HISKY, MODE_V2X2, MODE_YD717, MODE_KN, MODE_SYMAX, MODE_SLT, MODE_CX10, MODE_CG023, MODE_BAYANG, MODE_ESKY
NRF24L01_Reset();
break;
}

2
Multiprotocol/NRF24l01_SPI.ino
View File

@ -271,7 +271,7 @@ static const uint8_t xn297_scramble[] = {
static const uint16_t xn297_crc_xorout[] = {
0x0000, 0x3448, 0x9BA7, 0x8BBB, 0x85E1, 0x3E8C, // 1st entry is missing, probably never needed
0x451E, 0x18E6, 0x6B24, 0xE7AB, 0x3828, 0x8148, // it's used for 3-byte address w/ 0 byte payload only
0x451E, 0x18E6, 0x6B24, 0xE7AB, 0x3828, 0x814B, // it's used for 3-byte address w/ 0 byte payload only
0xD461, 0xF494, 0x2503, 0x691D, 0xFE8B, 0x9BA7,
0x8B17, 0x2920, 0x8B5F, 0x61B1, 0xD391, 0x7401,
0x2138, 0x129F, 0xB3A0, 0x2988};

2
Multiprotocol/multiprotocol.h
View File

@ -28,7 +28,7 @@ enum PROTOCOLS
MODE_DEVO =7, // =>CYRF6936 / DEVO protocol
MODE_YD717 = 8, // =>NRF24L01 / YD717 protocol (CX10 red pcb)
MODE_KN = 9, // =>NRF24L01 / KN protocol
MODE_SYMAX = 10, // =>NRF24L01 / SYMAX protocol (SYMAX4 working)
MODE_SYMAX = 10, // =>NRF24L01 / SYMAX protocol
MODE_SLT = 11, // =>NRF24L01 / SLT protocol
MODE_CX10 = 12, // =>NRF24L01 / CX-10 protocol
MODE_CG023 = 13, // =>NRF24L01 / CG023 protocol