gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-10-31 19:41:04 +00:00
Code Issues Projects Releases Wiki Activity

ESKY protocol code review

Browse Source
This commit is contained in:
Pascal Langer 2018-09-15 08:02:05 -04:00
parent 058e09c413
commit 5cf8d8d263
2 changed files with 6 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Multiprotocol/ESky_nrf24l01.ino
View File

@ -30,7 +30,7 @@ static void __attribute__((unused)) ESKY_set_data_address()
NRF24L01_WriteRegisterMulti(NRF24L01_10_TX_ADDR, rx_tx_addr, 4);
}
static void __attribute__((unused)) ESKY_init(uint8_t bind)
static void __attribute__((unused)) ESKY_init()
{
NRF24L01_Initialize();
@ -38,7 +38,7 @@ static void __attribute__((unused)) ESKY_init(uint8_t bind)
NRF24L01_WriteReg(NRF24L01_00_CONFIG, _BV(NRF24L01_00_EN_CRC) | _BV(NRF24L01_00_CRCO));
NRF24L01_WriteReg(NRF24L01_01_EN_AA, 0x00); // No Auto Acknowledgement
NRF24L01_WriteReg(NRF24L01_02_EN_RXADDR, 0x01); // Enable data pipe 0
if (bind)
if (IS_BIND_IN_PROGRESS)
{
NRF24L01_WriteReg(NRF24L01_03_SETUP_AW, 0x01); // 3-byte RX/TX address for bind packets
NRF24L01_WriteRegisterMulti(NRF24L01_0A_RX_ADDR_P0, (uint8_t*)"\x00\x00\x00", 3);
@ -63,7 +63,6 @@ static void __attribute__((unused)) ESKY_init(uint8_t bind)
static void __attribute__((unused)) ESKY_init2()
{
NRF24L01_FlushTx();
packet_sent = 0;
hopping_frequency_no = 0;
uint16_t channel_ord = rx_tx_addr[0] % 74;
hopping_frequency[12] = 10 + (uint8_t)channel_ord; //channel_code
@ -116,14 +115,12 @@ static void __attribute__((unused)) ESKY_send_packet(uint8_t bind)
// Each data packet is repeated 3 times on one channel, and 3 times on another channel
// For arithmetic simplicity, channels are repeated in rf_channels array
if (hopping_frequency_no == 0)
{
for (uint8_t i = 0; i < 6; i++)
{
uint16_t val=convert_channel_ppm(CH_AETR[i]);
packet[i*2] = val>>8; //high byte of servo timing(1000-2000us)
packet[i*2+1] = val&0xFF; //low byte of servo timing(1000-2000us)
}
}
rf_ch = hopping_frequency[hopping_frequency_no];
packet[12] = hopping_frequency[hopping_frequency_no+6]; // end_bytes
hopping_frequency_no++;
@ -132,23 +129,15 @@ static void __attribute__((unused)) ESKY_send_packet(uint8_t bind)
NRF24L01_WriteReg(NRF24L01_05_RF_CH, rf_ch);
NRF24L01_FlushTx();
NRF24L01_WritePayload(packet, ESKY_PAYLOAD_SIZE);
packet_sent = 1;
if (! rf_ch_num)
NRF24L01_SetPower(); //Keep transmit power updated
NRF24L01_SetPower(); //Keep transmit power updated
}
uint16_t ESKY_callback()
{
if(IS_BIND_DONE)
{
if (packet_sent && NRF24L01_packet_ack() != PKT_ACKED)
return ESKY_PACKET_CHKTIME;
ESKY_send_packet(0);
}
else
{
if (packet_sent && NRF24L01_packet_ack() != PKT_ACKED)
return ESKY_PACKET_CHKTIME;
ESKY_send_packet(1);
if (--bind_counter == 0)
{
@ -162,8 +151,9 @@ uint16_t ESKY_callback()
uint16_t initESKY(void)
{
bind_counter = ESKY_BIND_COUNT;
rx_tx_addr[2] = rx_tx_addr[3]; // Model match
rx_tx_addr[3] = 0xBB;
ESKY_init(IS_BIND_IN_PROGRESS);
ESKY_init();
ESKY_init2();
return 50000;
}

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 2
#define VERSION_REVISION 1
#define VERSION_PATCH_LEVEL 0
#define VERSION_PATCH_LEVEL 1
//******************
// Protocols