gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 16:48:10 +00:00
Code Issues Projects Releases Wiki Activity

Send channel order in MULTI_TELEMETRY

Browse Source
This commit is contained in:
pascallanger 2019-10-09 11:58:50 +02:00
parent 0b19fa0bdf
commit 5c7f997e7a
3 changed files with 20 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 0
#define VERSION_PATCH_LEVEL 10
#define VERSION_PATCH_LEVEL 11
//******************
// Protocols
@ -829,13 +829,13 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Values are concatenated to fit in 22 bytes like in SBUS protocol.
Failsafe values have exactly the same range/values than normal channels except the extremes where
0=no pulse, 2047=hold. If failsafe is not set or RX then failsafe packets should not be sent.
Stream[26] = sub_protocol bits 6 & 7|RxNum bits 4 & 5|Disable_Telemetry 3|Disable_CH_Mapping 2|Future_Use 1|Telem_Invert 0;
Stream[26] = sub_protocol bits 6 & 7|RxNum bits 4 & 5|Future_Use 3|Telem_Invert 2|Disable_Telemetry 1|Disable_CH_Mapping 0
sub_protocol is 0..255 (bits 0..5 + bits 6..7)
RxNum value is 0..63 (bits 0..3 + bits 4..5)
Disable_Telemetry => 0x08 0=enable, 1=disable
Disable_CH_Mapping => 0x04 0=enable, 1=disable
Future_Use => 0x02 0= , 1=
Telem_Invert => 0x01 0=normal, 1=invert
Telemetry_Invert => 0x08 0=normal, 1=invert
Future_Use => 0x04 0= , 1=
Disable_Telemetry => 0x02 0=enable, 1=disable
Disable_CH_Mapping => 0x01 0=enable, 1=disable
Stream[27.. 36] = between 0 and 9 bytes for additional protocol data
*/
/*
@ -896,16 +896,16 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
0x08 = Module is in binding mode
0x10 = Module waits a bind event to load the protocol
0x20 = Current protocol supports failsafe
0x40 = Current protocol supports disable channel mapping
0x80 = Data buffer is almost full
[5] major
[6] minor
[7] revision
[8] patchlevel,
version of multi code, should be displayed as major.minor.revision.patchlevel
[8] patchlevel
version of multi code, should be displayed as major.minor.revision.patchlevel
[9] channel order: CH4|CH3|CH2|CH1 with CHx value A=0,E=1,T=2,R=3
more information can be added by specifing a longer length of the type, the TX will just ignore these bytes
Type 0x02 Frksy S.port telemetry
Type 0x03 Frsky Hub telemetry

12
Multiprotocol/Multiprotocol.ino
View File

@ -1493,14 +1493,14 @@ void update_serial_data()
if(rx_len>26)
{//Additional flag received at the end
rx_ok_buff[0]=(rx_ok_buff[26]&0xF0) | (rx_ok_buff[0]&0x0F); // Additional protocol numbers and RX_Num available -> store them in rx_ok_buff[0]
if(rx_ok_buff[26]&0x08)
if(rx_ok_buff[26]&0x02)
DISABLE_TELEM_on;
if(rx_ok_buff[26]&0x04)
if(rx_ok_buff[26]&0x01)
DISABLE_CH_MAP_on;
#if defined TELEMETRY
if((rx_ok_buff[26]&0x01) ^ prev_inv_telem)
if(((rx_ok_buff[26]&0x08)!=0) ^ prev_inv_telem)
{ //value changed
if(rx_ok_buff[26]&0x01)
if(rx_ok_buff[26]&0x08)
{ // Invert telemetry
debugln("Invert telem %d,%d",rx_ok_buff[26]&0x01,prev_inv_telem);
#ifdef ORANGE_TX
@ -1512,7 +1512,7 @@ void update_serial_data()
#endif
}
else
{ // Normal telemetry
{ // Normal telemetry
debugln("Normal telem %d,%d",rx_ok_buff[26]&0x01,prev_inv_telem);
#ifdef ORANGE_TX
PORTC.PIN3CTRL &= 0xBF ;
@ -1522,7 +1522,7 @@ void update_serial_data()
RX_INV_off;
#endif
}
prev_inv_telem=rx_ok_buff[26]&0x01;
prev_inv_telem=rx_ok_buff[26]&0x08;
}
#endif
}

5
Multiprotocol/Telemetry.ino
View File

@ -78,7 +78,7 @@ static void multi_send_header(uint8_t type, uint8_t len)
static void multi_send_status()
{
multi_send_header(MULTI_TELEMETRY_STATUS, 5);
multi_send_header(MULTI_TELEMETRY_STATUS, 6);
// Build flags
uint8_t flags=0;
@ -129,6 +129,9 @@ static void multi_send_status()
Serial_write(VERSION_MINOR);
Serial_write(VERSION_REVISION);
Serial_write(VERSION_PATCH_LEVEL);
// Channel order
Serial_write(RUDDER<<6|THROTTLE<<4|ELEVATOR<<2|AILERON);
}
#endif