From 5bf8b0a2b68b10f3f18e7aec077d0db288de4e66 Mon Sep 17 00:00:00 2001 From: pascallanger Date: Wed, 27 Jul 2016 20:06:51 +0200 Subject: [PATCH] Update README.md --- README.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/README.md b/README.md index bd5e4ae..1d86003 100644 --- a/README.md +++ b/README.md @@ -283,7 +283,7 @@ This module can be purchased [here](http://www.banggood.com/2_4G-CC2500-A7105-Fl If you want to enable serial mode for er9x/ersky9x/Taranis/... and depending on your board revision, you have to do one of these modifications: - 1st revision, add 2 resistors as shown here: ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/a8895038-170-4in1%20module.jpg) -- 2nd revision, solder pads together as shown by the yellow marks: ![Screenshot](http://static.rcgroups.net/forums/attachments/4/0/8/5/8/3/a9204252-13-Taranis_serial.png) +- 2nd revision, solder pads together as shown: ![Screenshot](http://static.rcgroups.net/forums/attachments/4/8/3/5/8/4/a9206217-177-IMG_5790.jpg) Note: if you have the 1st board revision (check pictures above), sometime bind occures at power up even without pressing the bind button or not having an autobind protocol. To solve this issue, replacing the BIND led resistor (on the board back) of 1.2K by a 4.7K.