Merge branch 'pascallanger:master' into master

.github/workflows/main.yml

@@ -39,16 +39,26 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        board: [
-          "multi4in1:avr:multiatmega328p:bootloader=none", 
-          "multi4in1:avr:multiatmega328p:bootloader=optiboot", 
-          "multi4in1:avr:multixmega32d4", 
-          "multi4in1:STM32F1:multi5in1t18int", 
-          "multi4in1:STM32F1:multistm32f103cb:debug_option=none", 
-          "multi4in1:STM32F1:multistm32f103cb:debug_option=native", 
-          "multi4in1:STM32F1:multistm32f103cb:debug_option=ftdi", 
-          "multi4in1:STM32F1:multistm32f103c8:debug_option=none"
-        ]
+        include:
+          - board: "multi4in1:avr:multiatmega328p:bootloader=none"
+            name: "ATmega328p"
+          - board: "multi4in1:avr:multiatmega328p:bootloader=optiboot"
+            name: "ATmega328p (Optiboot)"
+          - board: "multi4in1:avr:multixmega32d4"
+            name: "OrangeRX"
+          - board: "multi4in1:STM32F1:multistm32f103c8:debug_option=none"
+            name: "STM32F103 (64KB)"
+          - board: "multi4in1:STM32F1:multistm32f103cb:debug_option=none"
+            name: "STM32F103 (128KB)"
+          - board: "multi4in1:STM32F1:multistm32f103cb:debug_option=native"
+            name: "STM32F103 (128KB, USB Debugging)"
+          - board: "multi4in1:STM32F1:multistm32f103cb:debug_option=ftdi"
+            name: "STM32F103 (128KB, Serial Debugging)"
+          - board: "multi4in1:STM32F1:multi5in1t18int"
+            name: "T18 5-in-1 (128KB)"
+
+    # Set the build name using the friendly board name
+    name: ${{ matrix.name }}
 
     # Set the environment variables
     env:

Lua_scripts/MultiChan.txt

@@ -198,7 +198,7 @@
 81,0,E010r5,E010r5,1,Flip,LED,CALIB,HLess,RTH,GLIDE
 82,0,LOLI,Std,0,CH5,CH6,CH7,CH8,1SwSePpPw,2SwSePw,3SwSe,4SwSe,5SwSeSb,6SwSe,7SwSePw,8SwSe
 83,0,E129,E129,1,TakLan,EmStop,TrimA,TrimE,TrimR
-83,1,E129,C186,1,TakLan,EmStop,TrimA,TrimE,TrimR,Loop
+83,1,E129,C186,1,TakLan,EmStop,TrimA,TrimE,TrimR,Loop,Flip
 84,0,JOYSWAY,Std,0
 85,0,E016H,Std,1,Stop,Flip,n-a,HLess,RTH
 87,0,IKEA

Lua_scripts/README.md

@@ -58,15 +58,11 @@ This is the Graupner HoTT adapted version of the Model Locator script using RSSI
 
 The OpenTX sensor "RSSI" is populated by the individual OpenTX telemetry protocol implementations and returns a value from 0..100 (percent) originating from the early FrSky implementation. It turns out that FrSky did not really provide a genuine signal strength indicator in units of dbm but a link quality indicator in 0..100%. With Graupner HoTT the link quality indicator is not a good basis for the model locator as it is very non-linear and doesn't change much with distance. Using the Graupner HoTT telemetry sensor "Rssi" which is a true signal strength indicator serves the purpose of locating a model much better as it varies much more with distance.
 
-## DSM Forward Programming
+## DSM Tools for EdgeTX and OpenTx
 
-This is a work in progress. It's available for color(+touch) and B&W screens.
+Collection of EdgeTx/OpenTX Tools to use with Spektrum Receivers including forward programming. Located on the radio SD card under \SCRIPTS\TOOLS, make sure to copy the DSMLIB folder!
 
-Work on OpenTX and EdgeTX. Located on the radio SD card under \SCRIPTS\TOOLS, make sure to copy the DSMLIB folder along with DSM FwdPrg_05_Color.lua or DSM FwdPrg_05_BW.lua.
-
-[![DSM Forward Programming](https://img.youtube.com/vi/sjIaDw5j9nE/0.jpg)](https://www.youtube.com/watch?v=sjIaDw5j9nE)
-
-If some text appears as Unknown_xxx, please report xxx and what the exact text display should be.
+Frank is maintaining these awesome tools, check out his [repository](https://github.com/frankiearzu/DSMTools). Feel free to ask questions or open issues there.
 
 ## DSM PID Flight log gain parameters for Blade micros
 

Multiprotocol/Bluefly_ccnrf.ino

@@ -0,0 +1,118 @@
+/*
+ This project is free software: you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation, either version 3 of the License, or
+ (at your option) any later version.
+
+ Multiprotocol is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
+ */
+// compatible with BLUEFLY HP100
+
+#if defined(BLUEFLY_CCNRF_INO)
+
+#include "iface_nrf250k.h"
+
+#define BLUEFLY_PACKET_PERIOD		6000
+#define BLUEFLY_PACKET_SIZE			12
+#define BLUEFLY_RF_BIND_CHANNEL		81
+#define BLUEFLY_NUM_RF_CHANNELS		15
+#define BLUEFLY_BIND_COUNT			800
+#define BLUEFLY_TXID_SIZE			5
+
+static void __attribute__((unused)) BLUEFLY_send_packet()
+{
+	if(IS_BIND_IN_PROGRESS)
+	{
+		memset(packet, 0x55, BLUEFLY_PACKET_SIZE);
+		memcpy(packet, rx_tx_addr, BLUEFLY_TXID_SIZE);
+		packet[5] = hopping_frequency[0];
+	}
+	else
+	{
+		NRF250K_Hopping(hopping_frequency_no);
+		hopping_frequency_no++;
+		if(hopping_frequency_no >= BLUEFLY_NUM_RF_CHANNELS);
+			hopping_frequency_no = 0;
+
+		packet[8] = packet[9] = 0;
+		for(uint8_t i=0; i<8 ; i++)
+		{
+			uint16_t ch = convert_channel_16b_limit(CH_AETR[i], 0, 1000);
+			packet[ i] = ch;
+			ch &= 0x300;
+			ch >>= 2;
+			packet[8 + (i>3?0:1)] = (packet[8 + (i>3?0:1)] >> 2) | ch;
+		}
+		// Checksum
+		uint8_t l, h, t;
+		l = h = 0xff;
+		for (uint8_t i=0; i<10; ++i)
+		{
+			h ^= packet[i];
+			h ^= h >> 4;
+			t = h;
+			h = l;
+			l = t;
+			t = (l<<4) | (l>>4);
+			h ^= ((t<<2) | (t>>6)) & 0x1f;
+			h ^= t & 0xf0;
+			l ^= ((t<<1) | (t>>7)) & 0xe0;
+		}
+		packet[10] = h; 
+		packet[11] = l;
+	}
+	
+	NRF250K_WritePayload(packet, BLUEFLY_PACKET_SIZE);
+	NRF250K_SetPower();				// Set tx_power
+	NRF250K_SetFreqOffset();		// Set frequency offset
+}
+
+static void __attribute__((unused)) BLUEFLY_RF_init()
+{
+	NRF250K_Init();
+	NRF250K_SetTXAddr((uint8_t *)"\x32\xAA\x45\x45\x78", BLUEFLY_TXID_SIZE);	// BLUEFLY Bind address
+	NRF250K_HoppingCalib(BLUEFLY_NUM_RF_CHANNELS);								// Calibrate all channels
+	NRF250K_RFChannel(BLUEFLY_RF_BIND_CHANNEL);									// Set bind channel
+}
+
+static void __attribute__((unused)) BLUEFLY_initialize_txid()
+{
+    uint8_t start = (rx_tx_addr[3] % 47) + 2;
+	for(uint8_t i=0;i<BLUEFLY_NUM_RF_CHANNELS;i++)
+		hopping_frequency[i] = start + i*2;
+	hopping_frequency_no=0;
+}
+
+uint16_t BLUEFLY_callback()
+{
+	#ifdef MULTI_SYNC
+		telemetry_set_input_sync(BLUEFLY_PACKET_PERIOD);
+	#endif
+	if(bind_counter)
+	{
+		bind_counter--;
+		if (bind_counter == 0)
+		{
+			BIND_DONE;
+			NRF250K_SetTXAddr(rx_tx_addr, BLUEFLY_TXID_SIZE);
+		}
+	}
+	BLUEFLY_send_packet();
+	return	BLUEFLY_PACKET_PERIOD;
+}
+
+void BLUEFLY_init(void)
+{
+	BLUEFLY_initialize_txid();
+	BLUEFLY_RF_init();
+
+	bind_counter = IS_BIND_IN_PROGRESS ? BLUEFLY_BIND_COUNT : 1;
+}
+
+#endif

Multiprotocol/E129_cyrf6936.ino

@@ -53,8 +53,9 @@ static void __attribute__((unused)) E129_build_data_packet()
 			packet[15] = bit_reverse(rx_tx_addr[0]);
 			packet[16] = bit_reverse(rx_tx_addr[1]);
 		}
-		//packet[ 3] = 0x00;							// E129 Mode: short press=0x20->0x00->0x20->..., long press=0x10->0x30->0x10->... => C186 throttle trim is doing the same:up=short press and down=long press
-		packet[ 3] = GET_FLAG(CH10_SW, 0x40);			// C159 loop flight 0x40, flag 0x04 is also set on this heli
+		packet[ 3] = GET_FLAG(CH10_SW, 0x40)			// C159 loop flight 0x40, flag 0x04 is also set on this heli
+				   | GET_FLAG(CH11_SW, 0x08);			// C129V2 flip
+														// Other flags in packet[3] => E129 Mode: short press=0x20->0x00->0x20->..., long press=0x10->0x30->0x10->... => C186 throttle trim is doing the same:up=short press and down=long press
 		packet[ 4] = GET_FLAG(CH5_SW,  0x20)			// Take off/Land 0x20
 				   | GET_FLAG(CH6_SW,  0x04);			// Emergency stop 0x04
 		//Channels and trims

Multiprotocol/J6Pro_cyrf6936.ino

@@ -36,7 +36,7 @@ enum PktState {
 };
 
 const uint8_t PROGMEM j6pro_bind_sop_code[] = {0x62, 0xdf, 0xc1, 0x49, 0xdf, 0xb1, 0xc0, 0x49};
-//const uint8_t j6pro_data_code[] = {0x02, 0xf9, 0x93, 0x97, 0x02, 0xfa, 0x5c, 0xe3, 0x01, 0x2b, 0xf1, 0xdb, 0x01, 0x32, 0xbe, 0x6f}; // unneeded since this is the default table after a reset
+const uint8_t j6pro_data_code[] = {0x02, 0xf9, 0x93, 0x97, 0x02, 0xfa, 0x5c, 0xe3, 0x01, 0x2b, 0xf1, 0xdb, 0x01, 0x32, 0xbe, 0x6f}; // unneeded since this is the default table after a reset
 
 static void __attribute__((unused)) j6pro_build_bind_packet()
 {
@@ -84,7 +84,9 @@ static void __attribute__((unused)) j6pro_cyrf_init()
     CYRF_WriteRegister(CYRF_10_FRAMING_CFG, 0xee);
     CYRF_WriteRegister(CYRF_1F_TX_OVERRIDE, 0x00);
     CYRF_WriteRegister(CYRF_1E_RX_OVERRIDE, 0x00);
-    //CYRF_ConfigDataCode(j6pro_data_code, 16);
+    
+	//Same as default reset but issues if not configured...
+	CYRF_ConfigDataCode(j6pro_data_code, 16);
     CYRF_WritePreamble(0x333302);
 
     CYRF_GetMfgData(cyrfmfg_id);

Multiprotocol/Losi_cyrf6936.ino

@@ -19,7 +19,7 @@
 
 #define LOSI_FORCE_ID
 
-const uint8_t PROGMEM LOSI_bind_sop_code[] = {0x62, 0xdf, 0xc1, 0x49, 0xdf, 0xb1, 0xc0, 0x49};
+//const uint8_t PROGMEM LOSI_bind_sop_code[] = {0x62, 0xdf, 0xc1, 0x49, 0xdf, 0xb1, 0xc0, 0x49};
 const uint8_t LOSI_data_code[][16] = {
 	{ 0xD7, 0xA1, 0x54, 0xB1, 0x5E, 0x89, 0xAE, 0x86, 0xC9, 0x2C, 0x06, 0x93, 0x86, 0xB9, 0x9E, 0xD7 }, //bind
 /*	{ 0xE1, 0xD6, 0x31, 0x26, 0x5F, 0xBD, 0x40, 0x93, 0xDC, 0x68, 0x08, 0x99, 0x97, 0xAE, 0xAF, 0x8C },
@@ -97,14 +97,14 @@ static void __attribute__((unused)) LOSI_cyrf_init()
 	CYRF_WriteRegister(CYRF_1F_TX_OVERRIDE, 0x04);			// No CRC
 	//CYRF_WriteRegister(CYRF_1E_RX_OVERRIDE, 0x14);
 	//CYRF_WriteRegister(CYRF_14_EOP_CTRL, 0x02);
+	CYRF_ConfigDataCode(LOSI_data_code[0], 16);				// Load bind data code
 }
 
 uint16_t LOSI_callback()
 {
 	#ifdef MULTI_SYNC
-		telemetry_set_input_sync(19738);
+		telemetry_set_input_sync(packet_period);
 	#endif
-	LOSI_send_packet();
 	if(bind_counter)
 	{
 		bind_counter--;
@@ -112,17 +112,16 @@ uint16_t LOSI_callback()
 		{
 			BIND_DONE;
 			CYRF_ConfigDataCode(LOSI_data_code[1], 16);			// Load normal data code
+			packet_period = 19738;
 		}
-		return 8763;
 	}
-	return 19738;
+	LOSI_send_packet();
+	return packet_period;
 }
 
 void LOSI_init()
 {
 	LOSI_cyrf_init();
-	//CYRF_FindBestChannels(hopping_frequency, 1, 0, 0x13, 75);	// 75 is unknown since dump stops at 0x27, this routine resets the CRC Seed to 0
-	//CYRF_ConfigRFChannel(hopping_frequency[0] | 1);				// Only odd channels
 
 	#ifdef LOSI_FORCE_ID
 		rx_tx_addr[0] = 0x47;
@@ -132,16 +131,11 @@ void LOSI_init()
 		CYRF_ConfigRFChannel(0x27);
 	#endif
 
-	if(IS_BIND_IN_PROGRESS)
-	{
-		bind_counter = 300;
-		CYRF_ConfigDataCode(LOSI_data_code[0], 16);				// Load bind data code
-	}
-	else
-	{
-		CYRF_ConfigDataCode(LOSI_data_code[1], 16);				// Load normal data code
-		bind_counter = 0;
-	}
+	CYRF_FindBestChannels(hopping_frequency, 1, 0, 0x13, 75);	// 75 is unknown since dump stops at 0x27, this routine resets the CRC Seed to 0
+	CYRF_ConfigRFChannel(hopping_frequency[0]);					// Only odd channels integrated in CYRF code...
+
+	bind_counter = IS_BIND_IN_PROGRESS?300:1;
+	packet_period = 8763;
 }
 
 #endif

Multiprotocol/Multi.txt

@@ -91,3 +91,4 @@
 92,MT99xx,PA18
 93,Kyosho2,KT-17
 94,Scorpio
+95,BlueFly

Multiprotocol/Multi_Protos.ino

@@ -106,6 +106,7 @@ const char STR_LOSI[]       ="Losi";
 const char STR_MOULDKG[]    ="MouldKg";
 const char STR_XERALL[]     ="Xerall";
 const char STR_SCORPIO[]    ="Scorpio";
+const char STR_BLUEFLY[]    ="BlueFly";
 
 const char STR_SUBTYPE_FLYSKY[] =     "\x04""Std\0""V9x9""V6x6""V912""CX20";
 const char STR_SUBTYPE_HUBSAN[] =     "\x04""H107""H301""H501";
@@ -222,6 +223,9 @@ const mm_protocol_definition multi_protocols[] = {
 	#if defined(BAYANG_RX_NRF24L01_INO)
 		{PROTO_BAYANG_RX,  STR_BAYANG_RX, STR_CPPM,       NBR_CPPM, OPTION_NONE,    0, 0, SW_NRF,    BAYANG_RX_init,  BAYANG_RX_callback  },	
 	#endif
+	#if defined(BLUEFLY_CCNRF_INO)
+		{PROTO_BLUEFLY,    STR_BLUEFLY,   NO_SUBTYPE,            0, OPTION_RFTUNE,  0, 0, SW_NRF,    BLUEFLY_init,    BLUEFLY_callback    },
+	#endif
 	#if defined(BUGS_A7105_INO)
 		{PROTO_BUGS,       STR_BUGS,      NO_SUBTYPE,            0, OPTION_NONE,    0, 0, SW_A7105,  BUGS_init,       BUGS_callback       },
 	#endif

Multiprotocol/Multiprotocol.h

@@ -19,7 +19,7 @@
 #define VERSION_MAJOR		1
 #define VERSION_MINOR		3
 #define VERSION_REVISION	3
-#define VERSION_PATCH_LEVEL	34
+#define VERSION_PATCH_LEVEL	38
 
 #define MODE_SERIAL 0
 
@@ -122,6 +122,8 @@ enum PROTOCOLS
 	PROTO_MT99XX2	= 92,	// =>NRF24L01, extension of MT99XX protocol
 	PROTO_KYOSHO2	= 93,	// =>NRF24L01
 	PROTO_SCORPIO	= 94,	// =>CYRF6936
+	PROTO_BLUEFLY	= 95,	// =>CC2500 & NRF24L01
+
 	
 	PROTO_NANORF	= 126,	// =>NRF24L01
 	PROTO_TEST		= 127,	// =>CC2500

Multiprotocol/Validate.h

@@ -340,6 +340,7 @@
 	#undef	ZSX_NRF24L01_INO
 #endif
 #if ( not defined(CC2500_INSTALLED) && not defined(NRF24L01_INSTALLED) ) || defined MULTI_EU
+	#undef	BLUEFLY_CCNRF_INO
 	#undef	GD00X_CCNRF_INO
 	#undef	KF606_CCNRF_INO
 	#undef	MJXQ_CCNRF_INO

Multiprotocol/_Config.h

@@ -255,6 +255,7 @@
 #define	ZSX_NRF24L01_INO
 
 //The protocols below need either a CC2500 or NRF24L01 to be installed
+#define	BLUEFLY_CCNRF_INO
 #define	GD00X_CCNRF_INO
 #define	KF606_CCNRF_INO
 #define	MJXQ_CCNRF_INO
@@ -567,6 +568,8 @@ const PPM_Parameters PPM_prot[14*NBR_BANKS]=	{
 		QX100
 	PROTO_BAYANG_RX
 		NONE
+	PROTO_BLUEFLY
+		NONE
 	PROTO_BUGS
 		NONE
 	PROTO_BUGSMINI

Protocols_Details.md

@@ -65,6 +65,7 @@ Protocol Name|Protocol Number|Sub_Proto 0|Sub_Proto 1|Sub_Proto 2|Sub_Proto 3|Su
 [Assan](Protocols_Details.md#ASSAN---24)|24|||||||||NRF24L01|
 [Bayang](Protocols_Details.md#BAYANG---14)|14|Bayang|H8S3D|X16_AH|IRDRONE|DHD_D4|QX100|||NRF24L01|XN297
 [Bayang RX](Protocols_Details.md#BAYANG-RX---59)|59|Multi|CPPM|||||||NRF24L01|XN297
+[BlueFly](Protocols_Details.md#BLUEFLY---95)|95|||||||||NRF24L01|
 [Bugs](Protocols_Details.md#BUGS---41)|41|||||||||A7105|
 [BugsMini](Protocols_Details.md#BUGSMINI---42)|42|BUGSMINI|BUGS3H|||||||NRF24L01|XN297
 [Cabell](Protocols_Details.md#Cabell---34)|34|Cabell_V3|C_TELEM|-|-|-|-|F_SAFE|UNBIND|NRF24L01|
@@ -325,7 +326,9 @@ CH1|CH2|CH3|CH4
 ## Kyosho - *73*
 
 ### Sub_protocol FHSS - *0*
-Surface protocol called FHSS introduced in 2017. Transmitters: KT-531P, KT-431PT...
+Surface protocol called FHSS introduced in 2017. Transmitter: KT-531P. Models: Mini-Z
+
+Extended limits supported
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12|CH13|CH14
 ---|---|---|---|---|---|---|---|---|----|----|----|----|----
@@ -616,16 +619,18 @@ Calib is the same as the original radio with both sticks down and to the left in
 Models: Eachine E129/E130 and Twister Ninja 250
 
 ### Sub_protocol C186 - *1*
-Models: C186/E120, C127/E110, K127, C159, C189
+Models: C186/E120, C127/E110, K127, C159, C189, C129v2
 
 The FC of the heli seems to store the trims Trim A/E/R=CH7..9. If you use these trims, make sure to center them after powering off the heli or they will be added to the previous trims and over correct.
 
-CH10|
----|
-Loop|
+CH10|CH11
+---|---
+Loop|Flip
 
 Loop: circular flight on the C159 (others?)
 
+Flip: flip/aerobatic on the C129v2 (others?)
+
 ## J6Pro - *22*
 
 CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
@@ -1030,6 +1035,17 @@ If a CC2500 is installed it will be used for all the below protocols. Option in
 
 If only a NRF24L01 is installed then these protocols might be problematic because they are using the XN297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
 
+## BLUEFLY - *95*
+Model: HP100
+
+CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8
+---|---|---|---|---|---|---|---
+A|E|T|R|CH5|CH6|CH7|CH8
+
+TRIM: either use this channel for trim only or add a mixer with aileron to increase the roll rate.
+
+RATE: -100% high rate, +100% low rate
+
 ## GD00X - *47*
 Model: GD005 C-17 Transport, GD006 DA62 and ZC-Z50
 
@@ -1398,7 +1414,7 @@ If a CC2500 is installed it will be used for this sub protocol. Option in this c
 If only a NRF24L01 is installed then this sub protocol might be problematic because it is using the xn297L emulation with a transmission speed of 250kbps which doesn't work very well with every NRF24L01, this is an hardware issue with the authenticity and accuracy of the components.
 
 ### Sub_protocol X420 - *1*
-Models: XK X420/X520 (TX=X4)
+Models: XK X420/X520 (TX=X4), WLtoys 284131/284161/284010 
 
 ***
 # NRF24L01 RF Module
@@ -1948,7 +1964,7 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11
 A|E|T|R|FLIP|LIGHT|PICTURE|VIDEO|HEADLESS|MAG_CAL_X|MAG_CAL_Y
 
 ### Sub_protocol V2x2 - *0*
-Models: WLToys V202/252/272, JXD 385/388, JJRC H6C, Yizhan Tarantula X6 ...
+Models: WLToys V202/252/272/A959/K969/K979/K989/K999, JXD 385/388, JJRC H6C, Yizhan Tarantula X6 ...
 
 PICTURE: also automatic Missile Launcher and Hoist in one direction
 

buildroot/bin/buildFunctions

@@ -86,6 +86,7 @@ buildEachRFModule() {
 buildReleaseFiles(){
     if [[ "$BOARD" =~ ":avr:multixmega32d4" ]]; then
         build_release_orx;
+        build_release_extras;
     elif [[ "$BOARD" =~ ":avr:multiatmega328p:bootloader=none" ]]; then
         build_release_avr_noboot;
     elif [[ "$BOARD" =~ ":avr:multiatmega328p:bootloader=optiboot" ]]; then

buildroot/bin/build_release_extras

@@ -0,0 +1,15 @@
+#!/usr/bin/env bash
+
+source ./buildroot/bin/buildFunctions;
+exitcode=0;
+
+printf "\e[33;1mPackaging ancilliary files for v$MULTI_VERSION\e[0m\n";
+cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
+
+mkdir -p SCRIPTS/TOOLS;
+cp -r Lua_scripts/* SCRIPTS/TOOLS/;
+find SCRIPTS/TOOLS -type f -name "*.md" -delete
+
+zip -q -r ./binaries/MultiLuaScripts.zip SCRIPTS/TOOLS/*;
+
+exit $exitcode;

buildroot/bin/build_release_orx

@@ -16,11 +16,4 @@ buildMulti;
 exitcode=$((exitcode+$?));
 mv build/Multiprotocol.ino.bin ./binaries/mm-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mPackaging ancilliary files for v$MULTI_VERSION\e[0m\n";
-cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
-mkdir -p SCRIPTS/TOOLS;
-cp Lua_scripts/*.lua SCRIPTS/TOOLS/;
-cp Lua_scripts/*.txt SCRIPTS/TOOLS/;
-zip -q ./binaries/MultiLuaScripts.zip SCRIPTS/TOOLS/*;
-
 exit $exitcode;

buildroot/bin/build_release_stm32f1_64k

@@ -3,7 +3,7 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-# CC2500-only 64Kb builds
+# CC2500-only 64Kb FCC builds
 printf "\e[33;1mBuilding mm-stm-cc2500-64-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable $ALL_PROTOCOLS;
 opt_disable IKEAANSLUTA_CC2500_INO;
@@ -28,4 +28,24 @@ buildMulti;
 exitcode=$((exitcode+$?));
 mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-64-reta-v$MULTI_VERSION.bin;
 
+# CC2500-only 64Kb LBT/EU builds
+printf "\e[33;1mBuilding mm-stm-cc2500-64-aetr-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace RETA AETR;
+opt_add MULTI_EU;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-64-aetr-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-cc2500-64-taer-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace AETR TAER;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-64-taer-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-cc2500-64-reta-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace TAER RETA;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-64-reta-lbt-v$MULTI_VERSION.bin;
+
 exit $exitcode;

buildroot/bin/build_release_stm32f1_no_debug

@@ -3,11 +3,7 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-# Builds for the DIY 5-in-1 module exceed the 120KB working capacity of the STM32F103CB
-# To work around this we have to disable some protocols in the builds for this module
-#DIY_5IN1_DISABLED="MOULDKG_NRF24L01_INO";
-
-# Generic 4-in-1 builds
+# Generic 4-in-1 FCC builds
 printf "\e[33;1mBuilding mm-stm-serial-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable ENABLE_PPM;
 buildMulti;
@@ -26,10 +22,30 @@ buildMulti;
 exitcode=$((exitcode+$?));
 mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-v$MULTI_VERSION.bin;
 
+# Generic 4-in-1 LBT/EU builds
+printf "\e[33;1mBuilding mm-stm-serial-aetr-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace RETA AETR;
+opt_add MULTI_EU;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-serial-taer-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace AETR TAER;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-serial-reta-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace TAER RETA;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-lbt-v$MULTI_VERSION.bin;
+
 # DIY 5-in-1 builds
 printf "\e[33;1mBuilding mm-stm-5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
+opt_remove MULTI_EU;
 opt_replace RETA AETR;
-#opt_disable $DIY_5IN1_DISABLED;
 opt_enable SX1276_INSTALLED;
 buildMulti;
 exitcode=$((exitcode+$?));
@@ -52,7 +68,6 @@ printf "\e[33;1mBuilding mm-tlite5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace RETA AETR;
 opt_disable INVERT_TELEMETRY;
 opt_disable SX1276_INSTALLED;
-#opt_enable $DIY_5IN1_DISABLED;
 opt_enable "MULTI_5IN1_INTERNAL JP_TLite"
 buildMulti;
 exitcode=$((exitcode+$?));
@@ -70,7 +85,7 @@ buildMulti;
 exitcode=$((exitcode+$?));
 mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-reta-v$MULTI_VERSION.bin;
 
-# CC2500-only builds
+# CC2500-only FCC builds
 printf "\e[33;1mBuilding mm-stm-cc2500-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace RETA AETR;
 opt_disable "MULTI_5IN1_INTERNAL JP_TLite"
@@ -94,11 +109,32 @@ buildMulti;
 exitcode=$((exitcode+$?));
 mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-v$MULTI_VERSION.bin;
 
+# CC2500-only LBT/EU builds
+printf "\e[33;1mBuilding mm-stm-cc2500-aetr-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace RETA AETR;
+opt_add MULTI_EU;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-aetr-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-cc2500-taer-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace AETR TAER;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-taer-lbt-v$MULTI_VERSION.bin;
+
+printf "\e[33;1mBuilding mm-stm-cc2500-reta-lbt-v$MULTI_VERSION.bin\e[0m\n";
+opt_replace TAER RETA;
+buildMulti;
+exitcode=$((exitcode+$?));
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-lbt-v$MULTI_VERSION.bin;
+
 # 4-in-1 PPM builds
 printf "\e[33;1mBuilding mm-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable A7105_INSTALLED;
 opt_enable CYRF6936_INSTALLED;
 opt_enable NRF24L01_INSTALLED;
+opt_remove MULTI_EU;
 opt_enable ENABLE_PPM;
 opt_disable ENABLE_SERIAL;
 opt_replace RETA AETR;

buildroot/bin/opt_remove

@@ -0,0 +1,5 @@
+#!/usr/bin/env bash
+
+SED=$(which gsed || which sed)
+
+eval "${SED} -i '/#define \b${1}/d' Multiprotocol/_Config.h"