gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:48:12 +00:00
Code Issues Projects Releases Wiki Activity

Update Protocols_Details.md

Browse Source
This commit is contained in:
Pascal Langer 2021-09-17 09:48:35 +02:00
parent b6e665b567
commit 570e6f8c64
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Protocols_Details.md
View File

@ -396,18 +396,18 @@ A|E|T|R|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
RX output will match the Devo standard EATR independently of the input configuration AETR, RETA... unless on OpenTX 2.3.3+ you use the "Disable channel mapping" feature on the GUI. RX output will match the Devo standard EATR independently of the input configuration AETR, RETA... unless on OpenTX 2.3.3+ you use the "Disable channel mapping" feature on the GUI.
Full telemetry is available if the RX supports it: TX_RSSI, A1 (set the ratio to 12.7) and A2 (set the ratio to 12.7), VFAS, RPM, temperature 1&2, GPS position/speed/altitude/time. Full telemetry is available if the RX supports it: TX_RSSI, A1 (set the ratio to 12.7) and A2 (set the ratio to 12.7), VFAS, RPM, temperature 1&2, GPS position/speed/altitude/time. The GPS coordinates come in two flavors which can't be distinguished programmatically, to switch from one to the other add 2 to the Option/FixedID setting value (0->2, 1->3).
Bind procedure using serial: Bind procedure using serial:
- With the TX off, put the binding plug in and power on the RX (RX LED slow blink), then power it down and remove the binding plug. Receiver should now be in autobind mode. - With the TX off, put the binding plug in and power on the RX (RX LED slow blink), then power it down and remove the binding plug. Receiver should now be in autobind mode.
- Turn on the TX, set protocol = Devo with option=0, turn off the TX (TX is now in autobind mode). - Turn on the TX, set protocol = Devo with Option/FixedID=0, turn off the TX (TX is now in autobind mode).
- Turn on RX (RX LED fast blink). - Turn on RX (RX LED fast blink).
- Turn on TX (RX LED solid, TX LED fast blink). - Turn on TX (RX LED solid, TX LED fast blink).
- Wait for bind on the TX to complete (TX LED solid). - Wait for bind on the TX to complete (TX LED solid).
- Make sure to set a uniq RX_Num value for model match. - Make sure to set a uniq RX_Num value for model match.
- Change option to 1 to use the global ID. - Change Option/FixedID to 1 to use the global ID.
- Do not touch option/RX_Num anymore. - Do not touch Option/FixedID and RX_Num anymore.
- Note: it might be limited to only the RX705 but to get telemetry, the opion fields has to be set back to 0 at then end of the procedure... - Note: it might be limited to only the RX705 but to get telemetry, the Option/FixedID field has to be set back to 0 at then end of the procedure...
Bind procedure using PPM: Bind procedure using PPM:
- With the TX off, put the binding plug in and power on the RX (RX LED slow blink), then power it down and remove the binding plug. Receiver should now be in autobind mode. - With the TX off, put the binding plug in and power on the RX (RX LED slow blink), then power it down and remove the binding plug. Receiver should now be in autobind mode.