LOLI RX configuration script

Lua_scripts/MultiChan.txt

@@ -180,5 +180,5 @@
 79,0,WFLY2,RF20x,0,CH5,CH6,CH7,CH8,CH9,CH10
 80,0,E016Hv2,E016Hv2,1,TakLan,EmStop,Flip,Calib,HLess,RTH
 81,0,E010r5,E010r5,1,Flip,LED,CALIB,HLess,RTH,GLIDE
-82,0,LOLI,0,CH5,CH6,CH7,CH8,1SwSePpPw,2SwSePw,3SwSe,4SwSe,5SwSeSb,6SwSe,7SwSePw,8SwSe
+82,0,LOLI,LOLI,0,CH5,CH6,CH7,CH8,1SwSePpPw,2SwSePw,3SwSe,4SwSe,5SwSeSb,6SwSe,7SwSePw,8SwSe
 83,0,E129,E129,1,TakLan,EmStop,TrimA,TrimE,TrimR

Lua_scripts/MultiChannelsUpdater.lua

@@ -1,5 +1,5 @@
 
-local toolName = "TNS|Multi chan namer|TNE"
+local toolName = "TNS|Multi channels namer|TNE"
 
 ---- #########################################################################
 ---- #                                                                       #

Lua_scripts/MultiLOLI.lua

@@ -0,0 +1,221 @@
+
+local toolName = "TNS|Multi LOLI RX config|TNE"
+
+---- #########################################################################
+---- #                                                                       #
+---- # Copyright (C) OpenTX                                                  #
+-----#                                                                       #
+---- # License GPLv2: http://www.gnu.org/licenses/gpl-2.0.html               #
+---- #                                                                       #
+---- # This program is free software; you can redistribute it and/or modify  #
+---- # it under the terms of the GNU General Public License version 2 as     #
+---- # published by the Free Software Foundation.                            #
+---- #                                                                       #
+---- # This program is distributed in the hope that it will be useful        #
+---- # but WITHOUT ANY WARRANTY; without even the implied warranty of        #
+---- # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         #
+---- # GNU General Public License for more details.                          #
+---- #                                                                       #
+---- #########################################################################
+
+local loli_nok = false
+local channels={ {  768, "PWM", 100,   102, "PPM",      50,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH1
+                 {  768, "PWM", 100,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH2
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH3
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH4
+                 {  102, "SBUS", 50,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH5
+                 { -768, "Servo",  0, -2048, "Switch", -100 }, -- CH6
+                 {  768, "PWM", 100,  -768, "Servo",      0, -2048, "Switch", -100 }, -- CH7
+                 { -768, "Servo",  0, -2048, "Switch", -100 } } -- CH8
+
+local sel = 1
+local edit = false
+
+local blink = 0
+local BLINK_SPEED = 15
+
+local function drawScreenTitle(title)
+    if LCD_W == 480 then
+        lcd.drawFilledRectangle(0, 0, LCD_W, 30, TITLE_BGCOLOR)
+        lcd.drawText(1, 5, title, MENU_TITLE_COLOR)
+    else
+        lcd.drawScreenTitle(title, 0, 0)
+    end
+end
+
+local function LOLI_Draw_LCD(event)
+  local line = 0
+
+  lcd.clear()
+
+  --Display settings
+  local lcd_opt = 0
+  if LCD_W == 480 then
+    drawScreenTitle("Multi - LOLI RX configuration tool")
+    x_pos = 152
+	x_inc = 90
+    y_pos = 40
+    y_inc = 20
+  else
+    x_pos = 5
+	x_inc = 30
+    y_pos = 1
+    y_inc = 8
+    lcd_opt = SMLSIZE
+  end
+
+  --Multi Module detection
+  if loli_nok then
+    if LCD_W == 480 then
+      lcd.drawText(10,50,"The LOLI protocol is not selected...", lcd_opt)
+    else
+      --Draw on LCD_W=128
+      lcd.drawText(2,17,"LOLI protocol not selected...",SMLSIZE)
+    end
+    return
+  end
+  
+  --Display current config
+  if LCD_W == 480 then
+	line = line + 1
+	lcd.drawText(x_pos, y_pos+y_inc*line -2, "Channel", lcd_opt)
+	lcd.drawText(x_pos+x_inc, y_pos+y_inc*line -2, "Function", lcd_opt)
+	lcd.drawRectangle(x_pos-4, y_pos+y_inc*line -4 , 2*x_inc +2, 188)
+	lcd.drawLine(x_pos-4, y_pos+y_inc*line +18, x_pos-4 +2*x_inc +1, y_pos+y_inc*line +18, SOLID, 0)
+	lcd.drawLine(x_pos+x_inc -5, y_pos+y_inc*line -4, x_pos+x_inc -5, y_pos+y_inc*line -5 +188, SOLID, 0)
+    line = line + 1
+  end
+  
+  local out
+  for i = 1, 8 do
+    out = getValue("ch"..(i+8))
+    lcd.drawText(x_pos, y_pos+y_inc*line, "CH"..i, lcd_opt)
+    for j = 1, #channels[i], 3 do
+      if out > channels[i][j] then
+        if sel == i then
+          invert = INVERS
+          if edit == true then
+            blink = blink + 1
+            if blink > BLINK_SPEED then
+              invert = 0
+              if blink > BLINK_SPEED * 2 then
+                blink = 0
+              end
+            end
+          end
+        else
+          invert = 0
+        end
+        lcd.drawText(x_pos+x_inc, y_pos+y_inc*line, channels[i][j+1], lcd_opt + invert)
+        break
+      end
+    end
+    line = line + 1
+  end
+end
+
+local function LOLI_Change_Value(dir)
+  local pos = 0
+  local out
+  --look for the current position
+  out = getValue("ch"..(sel+8))
+  for j = 1, #channels[sel], 3 do
+    if out > channels[sel][j] then
+	  pos = j
+	  break
+	end
+  end
+  
+  --decrement or increment
+  if dir < 0 and pos > 1 then
+    pos = pos - 3
+  elseif dir > 0 and pos + 3 < #channels[sel] then
+    pos = pos + 3
+  else
+    return
+  end
+  
+  --delete all mixers for the selected channel
+  local num_mix = model.getMixesCount(sel-1 +8)
+  for i = 1, num_mix do
+	model.deleteMix(sel-1 +8, 0);
+  end
+
+  --create new mixer
+  local source_max = getFieldInfo("cyc1")
+  
+  local val = { name = channels[sel][pos+1],
+				source = source_max.id - 1, -- MAX=100 on TX16S
+				weight = channels[sel][pos+2],
+				offset = 0,
+				switch = 0,
+				multiplex = 0,
+				curveType = 0,
+				curveValue = 0,
+				flightModes = 0,
+				carryTrim = false,
+				mixWarn = 0,
+				delayUp = 0,
+				delayDown = 0,
+				speedUp = 0,
+				speedDown = 0 }
+  model.insertMix(sel-1 +8, 0, val)
+end
+
+local function LOLI_Menu(event)
+  if event == EVT_VIRTUAL_NEXT then
+    if edit == false then
+      -- not changing a value
+      if sel < 8 then
+        sel = sel + 1
+      end
+    else
+      -- need to inc the value
+      LOLI_Change_Value(1)
+    end
+  elseif event == EVT_VIRTUAL_PREV then
+    if edit == false then
+      -- not changing a value
+      if sel > 1 then
+        sel = sel - 1
+      end
+    else
+      -- need to dec the value
+      LOLI_Change_Value(-1)
+    end
+  elseif event == EVT_VIRTUAL_ENTER then
+    if edit == false then
+      edit = true
+      blink = BLINK_SPEED
+    else
+      edit = false
+    end
+  end
+end
+
+-- Init
+local function LOLI_Init()
+  local module_conf = model.getModule(0)
+  if module_conf["Type"] ~= 6 or module_conf["protocol"] ~= 82 then
+    module_conf = model.getModule(1)
+    if module_conf["Type"] ~= 6 or module_conf["protocol"] ~= 82 then
+      loli_nok = true
+    end
+  end
+end
+
+-- Main
+local function LOLI_Run(event)
+  if event == nil then
+    error("Cannot be run as a model script!")
+    return 2
+  elseif event == EVT_VIRTUAL_EXIT then
+    return 2
+  else
+    LOLI_Menu(event)
+    LOLI_Draw_LCD(event)
+    return 0
+  end
+end
+
+return { init=LOLI_Init, run=LOLI_Run }

Lua_scripts/README.md

@@ -13,7 +13,7 @@ If you like this project and want to support further development please consider
   </tr>
 </table>
 
-## MultiChannelsUpdater.lua
+## MultiChannelsUpdater
 
 Automatically name the channels based on the loaded Multi protocol and sub protocol including the module channel order convention.
 
@@ -21,6 +21,24 @@ Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS. T
 
 [![MultiChannelsUpdater](https://img.youtube.com/vi/L58ayXuewyA/0.jpg)](https://www.youtube.com/watch?v=L58ayXuewyA)
 
+## MultiLOLI
+
+Script to set the channels function (switch, servo, pwm, ppm, sbus) on a [LOLI RX](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md#loli---82)
+
+[![MultiLOLIconfig](https://img.youtube.com/vi/e698pQxfv-A/0.jpg)](https://www.youtube.com/watch?v=e698pQxfv-A)
+
+## Graupner HoTT
+
+Enable text configuration of the HoTT RX and sensors: Vario, GPS, ESC, GAM and EAM.
+
+Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS.
+
+Notes:
+- Menu/MDL/Model is used to cycle through the detected sensors.
+- It's normal to lose the telemetry feed while using the text mode configuration. Telemetry will resume properly if the script is exited by doing a short press on the exit button.
+
+[![Text mode video](https://img.youtube.com/vi/81wd8NlF3Qw/0.jpg)](https://www.youtube.com/watch?v=81wd8NlF3Qw)
+
 ## DSM Forward Programming
 
 This is a work in progress. It's only available for color screens (Horus, TX16S, T16, T18...).
@@ -36,15 +54,3 @@ Need OpenTX 2.3.10 nightly or above. Located on the radio SD card under \SCRIPTS
 Lua telemetry script from [feathering on RCGroups](https://www.rcgroups.com/forums/showpost.php?p=46033341&postcount=20728) to facilitate setting the Gain Parameters on the Blade 150S FBL. It doesn't use Forward Programming but instead it just reads telemetry data from the Multi-module and displays it on a telemetry display.
 
 It is very similar to the Telemetry Based Text Generator functionality on Spektrum transmitters where one doesn't need to rely on the angle of the swashplate to determine selection/value.
-
-## Graupner HoTT.ua
-
-Enable text configuration of the HoTT RX and sensors: Vario, GPS, ESC, GAM and EAM.
-
-Need OpenTX 2.3.9 or above. Located on the radio SD card under \SCRIPTS\TOOLS.
-
-Notes:
-- Menu/MDL/Model is used to cycle through the detected sensors.
-- It's normal to lose the telemetry feed while using the text mode configuration. Telemetry will resume properly if the script is exited by doing a short press on the exit button.
-
-[![Text mode video](https://img.youtube.com/vi/81wd8NlF3Qw/0.jpg)](https://www.youtube.com/watch?v=81wd8NlF3Qw)

Protocols_Details.md

@@ -1322,10 +1322,10 @@ Features:
 Config on | For channel | Switch | Servo | PPM | SBUS | PWM
 ----|-----|-------|----|------|---|------
 CH9 | CH1 | -100% | 0% | +50% | - | +100%
-CH10| CH2 | -100% | 0% | - | - | -
+CH10| CH2 | -100% | 0% | - | - | +100%
 CH11| CH3 | -100% | 0% | - | - | -
 CH12| CH4 | -100% | 0% | - | - | -
-CH13| CH5 | -100% | 0% | - | +50% | +100%
+CH13| CH5 | -100% | 0% | - | +50% | -
 CH14| CH6 | -100% | 0% |  | - | -
 CH15| CH7 | -100% | 0% | - | - | +100%
 CH16| CH8 | -100% | 0% | - | - | -